350d boot from cf card

maxes

6

Re: 350d boot from cf card

« Reply #290 on: 29 / September / 2010, 13:22:24 »

Advertisements

Quote from: radoo on 25 / September / 2010, 11:07:39

IHowever, the blue led was always off, despite any operation I tried.

same problem, not solved yet .
You can see technical details in post my before (Post by: maxes on 27 / November / 2009, 01:11:15)
>Stopped at read_bootflag(buf1, buf2); in bootflag.c (same as scanled.fir )

Logged

radoo

4

Re: 350d boot from cf card

« Reply #291 on: 30 / September / 2010, 07:03:43 »

Quote from: maxes on 29 / September / 2010, 13:22:24

same problem, not solved yet .
You can see technical details in post my before (Post by: maxes on 27 / November / 2009, 01:11:15)
>Stopped at read_bootflag(buf1, buf2); in bootflag.c (same as scanled.fir )

I see you did some debuging, I was too lazy to install the stuff needed to recompile the stuff. I will get to it no later than the weekend and get back to you with the results.
I've seen somewhere in the forums that someone simply recompiled the whole stuff with NO Modifications and then it simply worked. However i think the problem was with the firmware itself, as he probably got the booting part right...

If all fails I will take my 350d to an authorized repair shop and see if they can figure out if something is wrong or out of the ordinary with my camera.

If anyone has any other advice or just ideas please feel free to throw them at us, it seems I am not the only one with this issue...

Logged

au_courant777

10

Re: 350d boot from cf card

« Reply #292 on: 07 / October / 2010, 22:38:25 »

Hi thanks for this great features. I just want to know if it is possible to choose which features will be available whenever you click on the INFO button, say i don't need some of them i would just like to incorporate spot metering, ISO, extended AEB bracketing and shutter count and totally omitting some other features. How am I going to do that?

Thanks in advance!!

Logged

crazyklaus

77

Re: 350d boot from cf card

« Reply #293 on: 08 / October / 2010, 13:36:49 »

Quote from: au_courant777 on 07 / October / 2010, 22:38:25

Hi thanks for this great features. I just want to know if it is possible to choose which features will be available whenever you click on the INFO button, say i don't need some of them i would just like to incorporate spot metering, ISO, extended AEB bracketing and shutter count and totally omitting some other features. How am I going to do that?

Thanks in advance!!

you need to download the gcc346.zip first
then load the newest code (I'll be posting something later)
copy the directory with the code into the myproject directory, make your settings in the file user_settings.txt, run build.bat and copy the resulting autoexec.bat to your card

« Last Edit: 08 / October / 2010, 13:38:21 by crazyklaus »

Logged

crazyklaus

77

Re: 350d boot from cf card

« Reply #294 on: 08 / October / 2010, 14:44:58 »

new version with +-6 stops exposure compensation via the info menu as requested

I noticed that the remaining picture count display doesn't work right but don't know yet what causes this bug. Has anybody else got the same problem? please post here (I expect that this is caused by the hack and everybody has it but I don't know for sure)

http://www.mediafire.com/?mp5mglgt1o8e6lm

Logged

radoo

4

Re: 350d boot from cf card

« Reply #295 on: 08 / October / 2010, 15:15:27 »

crazyklaus,

c'mon man, you are my last hope, could you have a look at my issue described a few posts above and see if you have ANY idea on what to try...
I'm really willing to try any crazy dangerous stuff on my 350d to make it work with chdk...

thanks in advance...
radoo

Logged

crazyklaus

77

Re: 350d boot from cf card

« Reply #296 on: 08 / October / 2010, 16:14:02 »

sorry, I really have no idea what to try. I don't know much about this firmware stuff.
You should got to the beginning of the 400D thread and try to ask some of the guys there who discovered how to load own code into the 400D/350D in the first place. I think these are the real firmware experts.

Logged

au_courant777

10

Re: 350d boot from cf card

« Reply #297 on: 09 / October / 2010, 05:30:29 »

Quote from: crazyklaus on 08 / October / 2010, 13:36:49

Quote from: au_courant777 on 07 / October / 2010, 22:38:25
Hi thanks for this great features. I just want to know if it is possible to choose which features will be available whenever you click on the INFO button, say i don't need some of them i would just like to incorporate spot metering, ISO, extended AEB bracketing and shutter count and totally omitting some other features. How am I going to do that?

Thanks in advance!!
you need to download the gcc346.zip first
then load the newest code (I'll be posting something later)
copy the directory with the code into the myproject directory, make your settings in the file user_settings.txt, run build.bat and copy the resulting autoexec.bat to your card

Thanks for the reply. I downloaded the files gcc346.zip and also the last code and im really stuck. I don't know what I am doing (hahaha) and i have no idea what it is. If you could give me some more detailed instructions or if I can request maybe you can do it for me (if It's ok it will be much appreciated) The only features I needed are: ISO, Spot metering, safety shift, shutter count display and extended AEB. thanks

Logged

crazyklaus

77

Re: 350d boot from cf card

« Reply #298 on: 10 / October / 2010, 07:38:32 »

I didn't describe it so detailed because I have already done that countless times, you just have to read the thread

but if you're really stuck it's no problem at all to build what you request. do you need the shortcuts? I would recommend you to have the color temp white balance feature built in additionally, if you have a speedlite flash with focus assist beam the 'no flash' option, too.

Logged

crazyklaus

77

Re: 350d boot from cf card

« Reply #299 on: 10 / October / 2010, 07:54:37 »

and, I forgot to ask, in what order do you want the menu entries to be?

Logged