supplierdeeply

350d boot from cf card

  • 510 Replies
  • 210158 Views
  • Publish
    Re: 350d boot from cf card
    « Reply #300 on: 11 / October / 2010, 06:56:00 »
    Advertisements
    and, I forgot to ask, in what order do you want the menu entries to be?

    Ohh, thanks crazyklaus. I tried again to do it but im really stuck, (hahaha i dont know what Im doing) I indeed need the shortcuts orders are  ISO, Spot metering, safety shift, shutter count display and extended AEB and as you suggested the color temp white balance and focus assist beam the 'no flash' option too. Thanks again in advance and very much appreciated crazyklaus.

  • Publish
    Re: 350d boot from cf card
    « Reply #301 on: 11 / October / 2010, 15:09:28 »
    ok, this is your file:
    http://www.mediafire.com/file/qa1vswkjceo5a2l/350D-au_courant.zip

    just take the autoexec.bin out of it.

    the menu is in the order 1 iso 2 metering (with spot option) 3 safety shift 4 flash on/off 5 counter 6 colortemp 7 white balance 8 aeb

    so if you want the aeb or WB just go the other way round and you're right there.
    also note that there are shortcuts for activating spot metering, safety shift, flash and colortemp white balance (look in the thread I explained the shortcuts somewhere) so you don't need to go over the menu eg if you want spot metering

  • Publish
    Re: 350d boot from cf card
    « Reply #302 on: 11 / October / 2010, 15:22:29 »
    new version with automatic flash exposure bracketing via INFO menu

    it always takes three shots: underexposed first, then normal and overexposed last.
    adjust the flash exposure difference with LEFT/RIGHT, adjust the waiting time between the shots with MENU/INFO (minimum is 3 seconds), start the sequence with SET

    don't press any keys during the sequence or you will confuse the code ;)

    you need to increase the waiting time between the shots manually if you want to take long exposures.
    please report if the 3 second waiting time doesn't work for you (I have the suspicion that it won't work with big files (ie RAW+L) and slow cards). longer delays should though.




    http://www.mediafire.com/file/uiw46q26dq9ddmm/350D-20101011.zip

  • Publish
    Re: 350d boot from cf card
    « Reply #303 on: 12 / October / 2010, 13:29:06 »
    Hi to all!
    I'm new here andm as first thingm I want to thank you all for these great hacks.

    I tried and succeded to install the "firmware" on my 350D, and everything works fine. Except the timelapse function: when I press "SET" the camera take the first shot, but the second one is never taken. Sometimes it takes 2 or 3 shots but not the number I set on the menu, nor the right interval. I tried to set different time and frames, but nothing changed. Anybody succeeded to make the timelapse work?

    I use the version of Cyrustam from this http://chdk.setepontos.com/index.php/topic,4202.msg54880.html#msg54880

    Thanks


  • Publish
    Re: 350d boot from cf card
    « Reply #304 on: 15 / October / 2010, 21:08:08 »
    Thn
    ok, this is your file:
    http://www.mediafire.com/file/qa1vswkjceo5a2l/350D-au_courant.zip

    just take the autoexec.bin out of it.

    the menu is in the order 1 iso 2 metering (with spot option) 3 safety shift 4 flash on/off 5 counter 6 colortemp 7 white balance 8 aeb

    so if you want the aeb or WB just go the other way round and you're right there.
    also note that there are shortcuts for activating spot metering, safety shift, flash and colortemp white balance (look in the thread I explained the shortcuts somewhere) so you don't need to go over the menu eg if you want spot metering
    ok, this is your file:
    http://www.mediafire.com/file/qa1vswkjceo5a2l/350D-au_courant.zip

    just take the autoexec.bin out of it.

    the menu is in the order 1 iso 2 metering (with spot option) 3 safety shift 4 flash on/off 5 counter 6 colortemp 7 white balance 8 aeb

    so if you want the aeb or WB just go the other way round and you're right there.
    also note that there are shortcuts for activating spot metering, safety shift, flash and colortemp white balance (look in the thread I explained the shortcuts somewhere) so you don't need to go over the menu eg if you want spot metering

    Thanks for this. It is awesome....

  • Publish
    Re: 350d boot from cf card
    « Reply #305 on: 18 / October / 2010, 13:04:27 »
    A question to whoever wrote the eAEB feature (Cyrustam i assume?)

    in your code you use a fixed delay of 5 secs between pictures, am i right to assume your busyflag idea doesnt work?

    Code: [Select]

    SendToIntercom(0x53,0,0);
     SleepTask(5000); //delay for system to save picture
                                    //while (cameraMode.BusyFlag != 0 )
                                    //{
                                    //   SleepTask(1000);
                                    //}


    Im asking because while this works fine under pretty much all circumstances,
    its stops working as soon as you get Tv values > 5secs (eg. nighttime photography).
    Now, I could just set the delay to 10000, but that sucks for normal exposure times.

    If it doesnt work, would you mind doing a little sanity check on something i thought about?


    Code: [Select]
    temp=camera.Mode.TvVal;

    tv=HexToMilsecs(temp);

    SendToIntercom(0x53,0,0);        //shoot

    SleepTask(500+tv);                 //well,  SleepTask(500+HexToMilsecs(camera.Mode.TvVal)); is probably more elegant

    To me this looks like it could provide a delay closer to what is actually needed to account for writing to the card.

    The real work is probably in the function translating the hex values to at least somewhat accurate durations for the sleep command so i would appreciate some feedback before i start working on some dumb idea that easier to archive some other way... :)

    thanks to anyone who's been working on this so far!!

  • Publish
    Re: 350d boot from cf card
    « Reply #306 on: 18 / October / 2010, 13:34:01 »
    hi...im new in the forum and tried CHDK in my 350D and now I am having a great problem.

    i just followed the instructions in this link below

    http://chdk.wikia.com/wiki/350D

    but now when I want to use a normal CF CARD, my camera cannot read it anymore and says "ERR CF"

    what am i going to do now? Please help me. I want to revert back all the settings in my camera before...please help.

  • Publish
    Re: 350d boot from cf card
    « Reply #307 on: 18 / October / 2010, 16:02:35 »
    pepponeskie,

    in this post:
    http://chdk.setepontos.com/index.php/topic,4202.msg40104.html#msg40104
    the guy who posted the scanled.fir links to a bootflag.fir that's supposed to revert the changes  the 2nd time its run

    if that doesnt work, id assume using the official canon firmware update would reset everything.
    (try to put the files on the modified cf if a normal one doesn't work)

    hope that helps



    edit:

    i worked out how cameraMode.TvVal is mapped to the shutterspeed.
    time to watch Tv now, i'll might continue on the other stuff tomorrow


    Code: [Select]
    98 4000
    95 3200
    93 2500
    90 2000
    8d 1600
    8b 1250
    88 1000
    85 800
    83 640
    80 500
    7d 400
    7b 320
    78 250
    75 200
    73 160
    70 125
    6d 100
    6b 80
    68 60
    65 50
    63 40
    60 30
    5d 25
    5b 20
    58 15
    55 13
    53 10
    50 8
    4d 6
    4b 5
    48 4
    45 0''3
    43 0''4
    40 0''5
    3d 0''6
    3b 0''8
    38 1''
    35 1''3
    33 1''6
    30 2''
    2d 2''5
    2b 3''2
    28 4''
    25 5''
    23 6''
    20 8''
    1d 10''
    1b 13''
    18 15''
    15 20''
    13 25''
    10  30''
    c bulb
    « Last Edit: 18 / October / 2010, 16:10:31 by annuges »


  • Publish
    Re: 350d boot from cf card
    « Reply #308 on: 18 / October / 2010, 19:52:06 »
    @annuges:

    my situation is similar to this post
    http://chdk.setepontos.com/index.php/topic,4202.msg50981.html#msg50981

    but, i didn't find a solution to his post.

  • Publish
    Re: 350d boot from cf card
    « Reply #309 on: 19 / October / 2010, 00:57:22 »
    I'm trying to install chdk on my 350d but I'm stuck at:

    "2. Insert CF to camera and run firmware update from the bottom choice of the 5th Menu setup screen. Screen will show "CF card containing firmware is required to update". Wait for blue LED to light steady. Wait another 30 seconds."

    No blue light ever comes on, I waited for 5 minutes and nothing happened. Am I missing something?

     

    Related Topics