SX 200 IS how to save settings ? - page 2 - Hello, I'm a NEWBIE - HELP!! (Newbies assistance, User Guides and thank you notes) - CHDK Forum

SX 200 IS how to save settings ?

  • 12 Replies
  • 4181 Views
Re: SX 200 IS how to save settings ?
« Reply #10 on: 23 / September / 2009, 06:37:14 »
Advertisements
outch....

so many settings in the menus, I didn't get the clear options

thank's a lot for your patience and kindness... everything great now !!!!!!

Re: SX 200 IS how to save settings ?
« Reply #11 on: 23 / September / 2009, 06:50:18 »
me again.....

oldgit, can  you give me some precisions about the optical zoom ?

I follow your advice, I begin to record, wait a few seconds, but optical zoom don't start...

*

Offline OldGit

  • ****
  • 303
Re: SX 200 IS how to save settings ?
« Reply #12 on: 24 / September / 2009, 02:13:22 »
I follow your advice, I begin to record, wait a few seconds, but optical zoom don't start...
This feature (Optical Zoom) is still buggy.
I start the recording, then zoom out (press zoom level FULLY left) for ~2 seconds then release
(some times I do this once sometimes twice)
then I can zoom in with Optical.
If the timing is wrong you just get digital zoom.

Also if it uses digital, you are stuck in the digital mode until you turn off cam and restart.
We are working on it, I suggest you join us in the development thread.
Sorry don't seem to be able to link to it, but search for "sx200is Porting" and you will find it.
OldGit
« Last Edit: 24 / September / 2009, 02:17:35 by OldGit »
SX200 IS-100C

 

Related Topics