sx200 IS usb connection - General Discussion and Assistance - CHDK Forum supplierdeeply
« previous next »
Pages: [1]   Go Down

sx200 IS usb connection

  • 1 Replies
  • 2984 Views
*

Offline handyandy55

  • *
  • 11
sx200 IS usb connection
« on: 26 / September / 2009, 19:40:42 »
Advertisements
Its great to see that the sx200is is progressing well.  I wish i had the skill to help.

I assume that we will be able to connect two of the sx200is together via a usb lead with remote trigger, as the examples found on this site using a small battery to sync the cameras.

Will the pin outs be the same using pin 1 & 4 if if remember corretly for the other article.

Any advise would be welcome.

I have tried using a 20D and 30D with some far results, but they are heavy to use when trying the shoot model helicopters fyling through the air.  I hope the sx200is will enable me to create a light weight rig but still being able to use its long lens.  I know that the shhot per second will be much less, unless CHDK improves this as well.

Thanks
Logged
*

Offline OldGit

  • ****
  • 303
Re: sx200 IS usb connection
« Reply #1 on: 27 / September / 2009, 03:22:41 »
@handyandy55,
the pinout will be same as all usb sockets, plugs and cables use a standard pinout.
Pins 1 and 4 are the power pins, MAKE SURE you get them the right way round.

As regards the shots / sec, CHDK does not alter that, you are stuck with the speed the camera and card are capably of.
OldGit
Logged
SX200 IS-100C
Pages: [1]   Go Up
« previous next »
 

Related Topics
SimplePortal 2.3.6 © 2008-2014, SimplePortal