CHDK for SX120 - page 43 - CHDK Releases - CHDK Forum supplierdeeply
« previous next »
Pages: 1 ... 38 39 40 41 42 [43] 44 45 46 47 48 ... 61   Go Down

CHDK for SX120

  • 602 Replies
  • 267184 Views
*

Offline redlinegts85

  • *
  • 18
Re: CHDK for SX120
« Reply #420 on: 15 / September / 2010, 14:47:06 »
Advertisements
Mine was set to auto, but I have raw photos turned off.  Do I need to turn it on?

It's a shame because the pictures would look beautiful without all that blue glow around the picture.
Logged
*

Offline fe50

  • ******
  • 3152
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: CHDK for SX120
« Reply #421 on: 15 / September / 2010, 15:17:44 »
Quote from: redlinegts85 on 15 / September / 2010, 14:47:06
Mine was set to auto, but I have raw photos turned off.  Do I need to turn it on?
No, the DF subtraction setting is a general setting, also for JPEG images.
When you set DFS to "On" & capture an image with e.g. 10s exposure time - does DF subtraction work (i.e. 10s for the shoot + 10s with the "Busy" message on the screen) ?
Logged
*

Offline redlinegts85

  • *
  • 18
Re: CHDK for SX120
« Reply #422 on: 15 / September / 2010, 17:12:06 »
Quote from: fe50 on 15 / September / 2010, 15:17:44
Quote from: redlinegts85 on 15 / September / 2010, 14:47:06
Mine was set to auto, but I have raw photos turned off.  Do I need to turn it on?
No, the DF subtraction setting is a general setting, also for JPEG images.
When you set DFS to "On" & capture an image with e.g. 10s exposure time - does DF subtraction work (i.e. 10s for the shoot + 10s with the "Busy" message on the screen) ?



I understand your question and I will try that later tonight..
Logged
*

Offline redlinegts85

  • *
  • 18
Re: CHDK for SX120
« Reply #423 on: 15 / September / 2010, 17:19:42 »
Ok, I just tried it.  Turned DFS to "ON" and tried 12.7sec, 20s, and 32s...it works perfect!!!  I'm happy now!  Looks like the auto setting doesn't work right so you just have to turn it to on.
Logged
*

Offline stargeezer

  • *
  • 34
Re: CHDK for SX120
« Reply #424 on: 16 / September / 2010, 00:28:27 »
I have used 64 sec exposures a lot and have been pretty happy.  At 128 sec it varies, I have not used it that much but it appears to be much better when it is cool.
Logged
*

Offline ivanatora

  • *
  • 6
Re: CHDK for SX120
« Reply #425 on: 18 / September / 2010, 02:50:01 »
Hello,
I've made my SD card bootable with gparted (it is a 2GB FAT 16 filesystem), copied the CHDK/ directory and DISKBOOT.BIN to the root of the SD card. However my SX120IS doesn't boot to CHDK at all. I tried also locking the card, but it still a no-no. The only difference is the 'card locked' message when the foto boots.
The firmware version is 1.00B.
Any ideas how to debug why is it not loading?

P.S. I'm trying the v912 from this topic: http://chdk.setepontos.com/index.php/topic,5026.0.html

[EDIT]
I used CardTricks and now CHDK is running :) Maybe I've failed with something when tried to manually install it...
However it is kinda buggy (as expected):
- the CHDK OSD is layed over the default camera OSD but I can use the <DISPLAY> button to remove the default OSD
- when I press half-shutter to focus, the CHDK OSD disappears, leaving the default OSD only and that OSD is blinking
- starting the camera requires longer press of the power/play button
- sometimes when I'm in the menu, a rectangular part of it in the upper right part of the screen disappears (goes completely transparent?)
- sometimes icons in the menu disappear
- more menu glitches - sometimes the whole menu disappears, but reappears for a second after any key has been hit
« Last Edit: 18 / September / 2010, 04:39:30 by ivanatora »
Logged
*

Offline msl

  • *****
  • 1280
  • A720 IS, SX220 HS 1.01a
    • CHDK-DE links
Re: CHDK for SX120
« Reply #426 on: 18 / September / 2010, 03:45:34 »
It's seems your card is not realy bootable.

Try some of this Methods. Copy the CHDK files to the card. Lock the card and start the camera.

msl
Logged
CHDK-DE:  CHDK-DE links
*

Offline lcassani

  • *
  • 3
    • Taccuino di Montagna
Re: CHDK for SX120
« Reply #427 on: 27 / September / 2010, 09:37:35 »
I'm trying the "sx120is-100b-0.9.9-912-full.zip" firmware, all I've tested seems working perfectly.
The most usefull thing is the battery level indicator, the camera goes off at 2180 mV and fresh batteries are about 2700 mV. Now the CHDK charge indicator shows a real value instead of the canon's one wich is always blinking.
Logged
*

Offline ivanatora

  • *
  • 6
Re: CHDK for SX120
« Reply #428 on: 28 / September / 2010, 15:15:03 »
Any decent bracketing scripts? I've made my own, but I'm not very satisfied with it. You can find it here: http://pastebin.com/TUGWstWA
It seems I can't count right the number of wheel "turns" to take from 0 EV to -2 EV then back to 0, to +2 and back to 0 (to reset the setting). I've hit the exact settings between 7-9 "turns" and every time it seems to takes different number of turns. Also for the delay after shooting - I've tried from 4 seconds to 1 second and it seems there is no difference? If there is a 2-second review after shooting does it matters for the script?
Logged
*

Offline pineyphotosnj

  • *
  • 14
Re: CHDK for SX120
« Reply #429 on: 01 / October / 2010, 22:22:10 »
I cant get it to work. I have Firmware 100B and either I get a "card locked" message or the camera does not start up.
Using sx120is-100b-0.9.9-912-full.zip and card tricks. First step format, second step make card bootable, then extract using CHDK-Card from zip. Is there anything different that I need to do for this installation to work?
Logged
Pages: 1 ... 38 39 40 41 42 [43] 44 45 46 47 48 ... 61   Go Up
« previous next »
 

Related Topics
SimplePortal 2.3.6 © 2008-2014, SimplePortal