CHDK for SX120 - page 48 - CHDK Releases - CHDK Forum  

CHDK for SX120

  • 597 Replies
  • 259759 Views
*

Offline cbob

  • *
  • 22
Re: CHDK for SX120
« Reply #470 on: 05 / December / 2010, 16:05:23 »
Advertisements
I don't have the original v912 to diff against anymore!

Here's the full archive: http://rapidshare.com/files/435132784/trunk912.rar

*

Offline whim

  • ******
  • 2046
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: CHDK for SX120
« Reply #471 on: 05 / December / 2010, 17:40:59 »
@cbob

Quote
I don't have the original v912 to diff against anymore!

go here: http://tools.assembla.com/chdk/browser/trunk?rev=912

and roll down to bottom of page, then click 'Download zip'

HTH,

wim

Re: CHDK for SX120
« Reply #472 on: 06 / December / 2010, 13:57:07 »
Please Help!
Since a few days I have Canon PowerShot SX120 IS.
I'm interested in how to find the appropriate version of CHDK for this camera, because flowers of this version you have placed on this forum none of them work?
Thanks in advance!

Re: CHDK for SX120
« Reply #473 on: 06 / December / 2010, 14:01:49 »
I very bad speak English, so please forgive me the mistakes in writing


*

Offline whim

  • ******
  • 2046
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: CHDK for SX120
« Reply #474 on: 06 / December / 2010, 14:06:33 »
@digitalex

check this wiki link to find out how to check your firmware version:

http://chdk.wikia.com/wiki/FAQ#Q._How_can_I_get_the_original_firmware_version_number_of_my_camera.3F

hth,

wim

Re: CHDK for SX120
« Reply #475 on: 06 / December / 2010, 15:24:00 »
@whim

Original firmware version: 1.0.0.0

*

Offline whim

  • ******
  • 2046
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: CHDK for SX120
« Reply #476 on: 06 / December / 2010, 15:55:16 »
@digitalex

Umm...no. Must be 3digits + 1 letter, like this:
Quote
Firmware Ver GM1.00B
If you used the ver.req / vers.req method, it either doesn't work on your cam or you did not press and hold down Func while pressing Display.
See here for more on vers.req method

wim
« Last Edit: 06 / December / 2010, 16:07:59 by whim »

Re: CHDK for SX120
« Reply #477 on: 06 / December / 2010, 16:21:52 »
Canon PowerShot SX120 IS
P-ID:31E0 PAL D

Firmware Ver GM1.00B
NoError
Jun  5 2009  17:09:33

Adj.Ver002.000
Total Shoot:265
Zoom Retry Count:0
Mecha Condition: 0x00000000
Driver Info: 0x00000000


*

Offline whim

  • ******
  • 2046
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: CHDK for SX120
« Reply #478 on: 06 / December / 2010, 18:40:50 »
@digitalex

Cool, it seems you have the same version as the downloads in this thread
(I've just had a quick read of the last 5 pages)

I found 2 links in cbob's post #446

It seems you must make your card bootable; for small cards (4 GB or smaller) you should be able to use CardTricks.
if you have a large card (more than 4 GB) you will need to create 2 partitions on your card, read fe50's post #450

hope that helps,

wim

Re: CHDK for SX120
« Reply #479 on: 06 / December / 2010, 19:04:28 »
Finally started working on my camera CHDK!
The problem was that I did not lock the card.
Whim brother, thanks a lot for your help!
You have a drink from me:)

 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal