CHDK for SX120 - page 54 - CHDK Releases - CHDK Forum
supplierdeeply

CHDK for SX120

  • 597 Replies
  • 257305 Views
*

Offline whim

  • ******
  • 2046
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: CHDK for SX120
« Reply #530 on: 20 / June / 2011, 10:59:27 »
Advertisements
@captKAOS

In case you're trying to install from MacOS, please be sure to read this

just guessing, but hope it helps ...

wim

Re: CHDK for SX120
« Reply #531 on: 20 / June / 2011, 13:49:55 »
I am using windows 7 on my laptop...
Something I wonder about...there is no setting for formatting in FAT 16, only FAT, NTFS, Fat 32, and exFAT... I do have a desktop with XP Pro in it...but it is not connected to the internet. Could load the zip file on a thumb drive and transfer it...

*

Offline whim

  • ******
  • 2046
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: CHDK for SX120
« Reply #532 on: 20 / June / 2011, 14:07:02 »
@captKAOS

No problem, FAT and FAT16 is the same ... Note that you can only format cards of max. 4 GB to FAT/FAT16,
for more info check the Installation Guide

hth,

wim

Re: CHDK for SX120
« Reply #533 on: 20 / June / 2011, 15:09:10 »
This is what I got from running Acid.

Downloading build information from http://mighty-hoernsche.de/
Downloading build information from http://downloads.chdk-treff.de/autobuild_acid.html
Downloading build information from http://stereo.jpn.org/eng/sdm/download.htm
tables loaded successfully
IMG_3015.JPG dropped
C:\Users\CaptKAOS\Pictures\REVIEW\2011-06-19 001\IMG_3015.JPG is being processed
Downloading http://zenoshrdlu.com/acid/acidchdk.properties
CHDK - no build found for Canon PowerShot SX120 IS 100b
Downloading http://zenoshrdlu.com/acid/acidadd.properties
Work is underway porting CHDK for this camera - test builds may be available
Downloading http://zenoshrdlu.com/acid/acidchde.properties
CHDK-DE - searching for build for sx120is-100b
CHDK-DE - build found - http://downloads.chdk-treff.de/autobuild/sx120is-100b-1.1.0_BETA_rev_689.zip
CHDK-DE - build found - http://downloads.chdk-treff.de/autobuild/sx120is-100b-1.1.0-full_BETA_rev_689.zip
Downloading http://zenoshrdlu.com/acid/acidsdm.properties
SDM - searching for build for sx120is-100b
SDM - build found - file/1.85-148-sx120is-100b-57.zip
Processing completed
http://downloads.chdk-treff.de/autobuild/sx120is-100b-1.1.0_BETA_rev_689.zip zip file being downloaded, please wait...
http://downloads.chdk-treff.de/autobuild/sx120is-100b-1.1.0_BETA_rev_689.zip has been saved
Extracting DISKBOOT.BIN
Extracting changelog.txt
Extracting readme.txt
Extracting PS.FI2


*

Offline whim

  • ******
  • 2046
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: CHDK for SX120
« Reply #534 on: 20 / June / 2011, 15:24:24 »
@CaptKAOS

That sounds like it went OK - is it still not working ? What kind/size of card are you using ?

wim

Re: CHDK for SX120
« Reply #535 on: 20 / June / 2011, 16:01:12 »
I'm using a 2 gb sd card.  I downloaded the file again through Acid. It is for the 100b. This file doesn't have the CHDK folder.

The one for the IXUS120-_sd940-100e-09.9-1210-full beta has the CHDK folder. This is the one I got the first time I downloaded using Acid. That did not work at all...got the error. So, I ran Acid again and it came up with   
 http://downloads.chdk-treff.de/autobuild/sx120is-100b-1.1.0_BETA_rev_689.zip

I downloaded and unzipped it after reformatting the card...still did not work.  I tried the IXUS file, then installed the other one over it.
I got part of it to work once. It showed the battery level and something about scripts.  I shut it down, then tried it again.

I get "update firmware version?
1.03030 (right arrow) 1.1.0.0
I hit ok and it shows a quick red screen then goes backto a picture.


Re: CHDK for SX120
« Reply #536 on: 20 / June / 2011, 16:14:49 »
I also tried this one...this time it gave me the CHDK folder, but I still get the red screen with white lettering something about version something...goes away too fast and I can't catch what it says.
 http://downloads.chdk-treff.de/autobuild/sx120is-100b-1.1.0-full_BETA_rev_689.zip

*

Offline whim

  • ******
  • 2046
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: CHDK for SX120
« Reply #537 on: 20 / June / 2011, 16:33:01 »
@CaptKAOS

Ha, getting somewhere now. The 'quick red screen' is the CHDK logo showing for a second or so.
Now, to get into the CHDK menu, first press the "Print" button, and "<Alt>" should appear
at bottom center of your screen. Now press "MENU" to get into the CHDK menu.
Probably a good idea to download the CHDK User Guide here


Hope that's enough to get you started,

wim

PS If the menu is in German, find the CHDK\LANG folder on your card, and delete the 'german.lng'
file in it - that will make the menu show up in English
« Last Edit: 20 / June / 2011, 16:37:03 by whim »


Re: CHDK for SX120
« Reply #538 on: 20 / June / 2011, 17:26:16 »
I finally got by downloading Card Tricks...but it is in German or something I can't understand... I know I have read how to change the language...just gotta go find it...  I do appreciate all the help.  I just looked at your post after I posted this one...:) I will definitely download the guide...Now I am getting excited!!  :) :)

Thanks again...
« Last Edit: 20 / June / 2011, 17:28:21 by CaptKAOS »

Re: CHDK for SX120
« Reply #539 on: 20 / June / 2011, 17:37:53 »
WOW!!  So much more to learn about my camera...:) :) :D :D

 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal