CHDK for SX120 - page 55 - CHDK Releases - CHDK Forum

CHDK for SX120

  • 597 Replies
  • 209655 Views
Re: CHDK for SX120
« Reply #540 on: 03 / July / 2011, 03:50:15 »
Advertisements
Good morning folks. I would like to mod my SX120. However, I am not sure which page to go so I can follow instructions about modding our SX120. There are 36 pages. Can someone please point me to the right direction as to where to start?

Thanks.

Neil

Re: CHDK for SX120
« Reply #541 on: 03 / July / 2011, 04:25:22 »
Good morning folks. I would like to mod my SX120. However, I am not sure which page to go so I can follow instructions about modding our SX120. There are 36 pages. Can someone please point me to the right direction as to where to start?
How about starting here : http://chdk.wikia.com/wiki/CHDK_for_Dummies and here http://chdk.wikia.com/wiki/CHDK
Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline fe50

  • ******
  • 3132
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: CHDK for SX120
« Reply #542 on: 03 / July / 2011, 04:29:54 »
Hello & welcome, Neil !

Can someone please point me to the right direction as to where to start?
1) Read the CHDK FAQ
  2) Check your firmware version (--> HowTo...) - if it's not 1.00B, then there's no CHDK available for your camera, stop here...

3) if your fw version is 1.00B:
  4) Read here to find & download a full CHDK package
  5) Read more about using CHDK in the CHDK user manual

Re: CHDK for SX120
« Reply #543 on: 03 / July / 2011, 19:33:15 »
Perfect. Which one here is for my PowerShot SX120 IS?

http://mighty-hoernsche.de/

Also, I got the firmware. It's Ver GM1.00B


*

Offline reyalp

  • ******
  • 13394
Re: CHDK for SX120
« Reply #544 on: 03 / July / 2011, 19:50:40 »
Perfect. Which one here is for my PowerShot SX120 IS?

http://mighty-hoernsche.de/

Also, I got the firmware. It's Ver GM1.00B
SX120 is not yet supported in the CHDK autobuild. You can try the german autobuild: http://forum.chdk-treff.de/download.php

If you prefer English, delete the german.lng from CHDK/LANG after installing.
Don't forget what the H stands for.

Re: CHDK for SX120
« Reply #545 on: 03 / July / 2011, 20:29:20 »
Awesome! I hope it won't break my camera. :)

Re: CHDK for SX120
« Reply #546 on: 04 / July / 2011, 17:23:20 »
I extracted CHDK on my SD card. I pressed menu and selected Firm Updated. It asked me to update firmware version.

1.0.0.0 -> 1.1.0.0

I selected 1.1.0.0 and clicked Ok. The screen went black and nothing happened.

From the readme.txt
"- Your camera will now load CHDK. You should see the blue "Print" button on the back of your camera flash a few times to let you know that CHDK is booting, and the CHDK Splash-Screen will appear in your viewfinder or LCD display."

I didn't see it. It just went black.

In case you ask, the file I downloaded is sx120is-100b-1.1.0-full_BETA_rev_696.zip
from http://forum.chdk-treff.de/download.php

Any help would be greatly appreciated.

Thanks!

Re: CHDK for SX120
« Reply #547 on: 04 / July / 2011, 23:21:41 »
I got it working. I now saw the menus. I just need to figure out how to use it. :)


Re: CHDK for SX120
« Reply #548 on: 05 / July / 2011, 00:18:39 »
How come Canon Digital Photo Professional, more commonly known as DPP, does not understand the format raw file that CHDK creates? I opened the .CRW and it cannot understand it.

I also opened the same file using CS5 and it cannot open it too.

Any ideas?

*

Offline philmoz

  • *****
  • 3332
    • Photos
Re: CHDK for SX120
« Reply #549 on: 05 / July / 2011, 00:24:32 »
How come Canon Digital Photo Professional, more commonly known as DPP, does not understand the format raw file that CHDK creates? I opened the .CRW and it cannot understand it.

I also opened the same file using CS5 and it cannot open it too.

Any ideas?

http://chdk.wikia.com/wiki/FAQ#Q._I.27ve_shot_some_RAW_pictures._How_do_I_process_them.3F

CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)

 

Related Topics