CHDK for SX120 - page 59 - CHDK Releases - CHDK Forum

CHDK for SX120

  • 597 Replies
  • 208843 Views
Re: CHDK for SX120
« Reply #580 on: 24 / December / 2012, 19:02:18 »
Advertisements
That did it, I formated and installed the new version... and it works like a charm! Thanks a lot srsa_4c :)

Re: CHDK for SX120
« Reply #581 on: 29 / December / 2012, 20:27:32 »
I got a SX120 today.  Was really looking forward to using it w/ CHDK, but has been a disappointment so far. 

I managed to load CHDK, also set the card to be bootable.  However none of my settings stick, i.e they all revert back to default settings when powered off.   Tried a 4 GB card  as well as 512 MB.

Any ideas?  I ended up ordering two of these...

*

Offline reyalp

  • ******
  • 13386
Re: CHDK for SX120
« Reply #582 on: 29 / December / 2012, 20:31:09 »
I managed to load CHDK, also set the card to be bootable.  However none of my settings stick, i.e they all revert back to default settings when powered off.
What settings are you referring to?
What version of CHDK are you using?
Don't forget what the H stands for.

Re: CHDK for SX120
« Reply #583 on: 29 / December / 2012, 20:57:00 »
Settings like custom user menu, 'don't show temperature' etc...

I used sx120is-100b-1.1.0-2418-full_BETA

Strangely, I am not having that issue when I downloaded from the german server
http://forum.chdk-treff.de/download.php

"...to get the menu in english, just delete or rename \CHDK\LANG\german.lng... " -- that did not work for me though.  I still see the menu in german (I could make out most of it though).

On a side note, does the sx120 EAT batteries?  What seems to last forever on my A590 drained so so quickly on the sx120.


Re: CHDK for SX120
« Reply #584 on: 29 / December / 2012, 21:09:12 »
Settings like custom user menu, 'don't show temperature' etc... I used sx120is-100b-1.1.0-2418-full_BETA
Strangely, I am not having that issue when I downloaded from the german server
http://forum.chdk-treff.de/download.php
The code base is common - you must be doing something else differently ?

Quote
"...to get the menu in english, just delete or rename \CHDK\LANG\german.lng... " -- that did not work for me though.  I still see the menu in german (I could make out most of it though).
Deleting the german.lng file no longer works - better instructions can be found here :
http://chdk.setepontos.com/index.php?topic=8546.msg89683#msg89683




Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline reyalp

  • ******
  • 13386
Re: CHDK for SX120
« Reply #585 on: 29 / December / 2012, 21:14:32 »
Settings like custom user menu, 'don't show temperature' etc...
This is quite strange, it would probably mean CHDK isn't able to save the cfg file (CHDK/CCHDK2.CFG)

I checked the http://mighty-hoernsche.de/ autobuild for my a540 and it correctly created the cfg file and saved the settings. If you power off before leaving the menu, they won't be saved.
Don't forget what the H stands for.

Re: CHDK for SX120
« Reply #586 on: 29 / December / 2012, 21:23:44 »
I managed to easily navigate thru the german menu and change the lang to eng.  I am all fine now.

However I do not recall doing anything differently...  It may be worthwhile to try the default beta english zip package again.  I will try it on a different card and let you know.

>> If you power off before leaving the menu, they won't be saved.
I am pretty sure I was out of the CHDK menu (which is a habit for me) when I power it down.

Thanks!

ps: I mainly CHDK for auto bracketing in continuous mode, and the SX120 seems like a turtle (slow) compared to my A570/A590/A720 etc...
« Last Edit: 29 / December / 2012, 21:26:25 by pannayar »

Re: CHDK for SX120
« Reply #587 on: 30 / December / 2012, 14:29:13 »
I am currently having these issues with all recent builds (unable to load script file, bad pixel file cannot be read).

Workaround: Get hold of an earlier build (e.g. sx120is-100b-1.1.0-2040-full_BETA.zip, from August 2012) which will work fine.

Lee


Re: CHDK for SX120
« Reply #588 on: 30 / December / 2012, 14:50:19 »
I am currently having these issues with all recent builds (unable to load script file, bad pixel file cannot be read).
Workaround: Get hold of an earlier build (e.g. sx120is-100b-1.1.0-2040-full_BETA.zip, from August 2012) which will work fine.

philmoz found and fixed the problem today as reported here : http://chdk.setepontos.com/index.php?topic=9193.msg95021#msg95021

Should make it into the autobuild tonight.  In the meantime,  here's a build from the svn with the fix included : https://www.box.com/s/vha2p2s1masqnqe9xyla
« Last Edit: 30 / December / 2012, 14:53:50 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16

Re: CHDK for SX120
« Reply #589 on: 21 / August / 2013, 14:08:13 »
Hmm... Trochę czasu już upłynęło... To pozwolę sobie napisać po polsku. ;)
Panie Gajownik, zwracam się przede wszystkim do pana, bo nie sposób przebrnąć przez 59 stron tego topicu, to jest te CHDK już, czy nie. Na wikia widziałem, ale może są lepsze wersje. Podczas pierwszej i ostatniej próbie aktualizacji firmware'u aparat się wyłączył i tak samo przy kolejnych podejściach. Da się coś z tym zrobić. Mój aparat to oczywiście PS SX120IS firmware to: GM1.00B Jest jakaś strona inna niż wikia, z której mogę pobrać działającą wersję CHDK?

OK. Now i'll try in english... ;)
When I'd try to actualize my firmwarwe, aparat turned off and nothing done. Could sb. fix my problem? :)
My firmware wersion is: GM1.00B and camera PS SX120IS Is it possible to install any version of CHDK, where can i download it?

 

Related Topics