CHDK for SX120 - page 47 - CHDK Releases - CHDK Forum  

CHDK for SX120

  • 602 Replies
  • 267307 Views
*

Offline reyalp

  • ******
  • 14118
Re: CHDK for SX120
« Reply #460 on: 25 / November / 2010, 17:15:45 »
Advertisements
You may also be able to use http://chdk.wikia.com/wiki/Canon_Basic/Scripts/Loader as a manual start method, but I haven't heard from anyone who has tried it on these cameras.
How can I run script without CHDK allready running?
By using a scripting system that is built into the original firmware: http://chdk.wikia.com/wiki/Canon_Basic
Don't forget what the H stands for.

*

Offline limon

  • *
  • 10
Re: CHDK for SX120
« Reply #461 on: 26 / November / 2010, 04:15:36 »
PS.FI2 from reply# 446 works for me.
SD card format in fat32 no bootable and unlock .
firmware update-> Ok-> and quick push button power on/off and wait  end of loading process.
I apologize for my English
« Last Edit: 26 / November / 2010, 04:29:31 by limon »

*

Offline reyalp

  • ******
  • 14118
Re: CHDK for SX120
« Reply #462 on: 26 / November / 2010, 16:13:54 »
PS.FI2 from reply# 446 works for me.
SD card format in fat32 no bootable and unlock .
firmware update-> Ok-> and quick push button power on/off and wait  end of loading process.
I apologize for my English
You are sure CHDK is running after this ?
Don't forget what the H stands for.

*

Offline limon

  • *
  • 10
Re: CHDK for SX120
« Reply #463 on: 26 / November / 2010, 16:38:05 »
100% work!!!


*

Offline limon

  • *
  • 10
Re: CHDK for SX120
« Reply #464 on: 01 / December / 2010, 12:58:21 »
hello people,
i am rebuilding last version chdk de with manual loading (As it is described in reply 461).

Re: CHDK for SX120
« Reply #465 on: 02 / December / 2010, 13:50:47 »
Hi everybody !

I used CHDK in the Canon SX110IS, and for my sourprise when I installed in the SX120IS expecting pretty the same thing I found that the histogram width in the screen is much reduced. The screen resolution seems to me a bit high, the fonts in general are a bit small ... Anybody knows how to change or customize any of this aspects ?

Thanks in advance,
Mariano.

*

Offline reyalp

  • ******
  • 14118
Re: CHDK for SX120
« Reply #466 on: 02 / December / 2010, 16:07:33 »
Hi everybody !

I used CHDK in the Canon SX110IS, and for my sourprise when I installed in the SX120IS expecting pretty the same thing I found that the histogram width in the screen is much reduced. The screen resolution seems to me a bit high, the fonts in general are a bit small ... Anybody knows how to change or customize any of this aspects ?
Aspect correction settings in the code are probably wrong.
Don't forget what the H stands for.

*

Offline cbob

  • *
  • 22
Re: CHDK for SX120
« Reply #467 on: 05 / December / 2010, 06:21:21 »
PS.FI2 from reply# 446 works for me.
SD card format in fat32 no bootable and unlock .
firmware update-> Ok-> and quick push button power on/off and wait  end of loading process.

Actually PS.FI2 works for me too; I just didn't realise it. It's not how I remember it working on other models: you need to press the power button as soon as the screen blanks, otherwise the camera just turns off and CHDK doesn't start when it's subsequently powered up.

It's a bit hit and miss, but it's reliable enough to use for in-camera partition swapping.

Hi everybody !

I used CHDK in the Canon SX110IS, and for my sourprise when I installed in the SX120IS expecting pretty the same thing I found that the histogram width in the screen is much reduced. The screen resolution seems to me a bit high, the fonts in general are a bit small ... Anybody knows how to change or customize any of this aspects ?
Aspect correction settings in the code are probably wrong.

I dug around and found this. The original SX120 builds defined a hi-res screen without aspect correction. I've now pulled in the relevant bits from the SX200 (camera.h and lib.c) to stretch things on the X axis and the 10pixel menu margin from the G11.

Compared with the non-standard 1:1 X builds you'll fit less on the OSD this way, but it looks better overall.

Attached is 912 rebuilt with this and a semi-working (see above) PS.FI2.

Just ask me here if anyone wants this source: I don't have access to the SVN, drop.io is dead and the archive is 5Mb.
« Last Edit: 05 / December / 2010, 08:40:33 by cbob »


*

Offline msl

  • *****
  • 1280
  • A720 IS, SX220 HS 1.01a
    • CHDK-DE links
Re: CHDK for SX120
« Reply #468 on: 05 / December / 2010, 14:51:16 »
Just ask me here if anyone wants this source: I don't have access to the SVN, drop.io is dead and the archive is 5Mb.

A good way is to create a diff/patch file. This file is small enough for a attachment and it's easier to insert the code in the trunk.

msl
CHDK-DE:  CHDK-DE links

*

Offline limon

  • *
  • 10
Re: CHDK for SX120
« Reply #469 on: 05 / December / 2010, 15:05:56 »
cbob, i am not programmer but it is interesting to me. Great job.
« Last Edit: 06 / December / 2010, 01:30:49 by limon »

 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal