SD1200 IS Porting Thread - page 29 - DryOS Development - CHDK Forum
« previous next »
Pages: 1 ... 24 25 26 27 28 [29] 30 31 32   Go Down

SD1200 IS Porting Thread

  • 312 Replies
  • 150460 Views
*

Offline waterwingz

  • ******
  • 12138
    • Waterwingz
Re: SD1200 IS Porting Thread
« Reply #280 on: 04 / July / 2011, 11:51:54 »
Advertisements
Quote from: hwntw on 04 / July / 2011, 06:20:20
Do forum users agree that adding more cameras to the list shown in the post above, will provide the fix for bracketing/custom timer shooting, where needed?
The SD1200 is not currently included in the list of cameras that get this fix but probably should be.

@reyalp : I can't submit patches this week - can you just add it directly ?


Fixed : SD1200 not SD1300
« Last Edit: 04 / July / 2011, 12:49:39 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline hwntw

  • ***
  • 159
Re: SD1200 IS Porting Thread
« Reply #281 on: 04 / July / 2011, 12:30:54 »
Quote from: waterwingz on 04 / July / 2011, 11:51:54
Quote from: hwntw on 04 / July / 2011, 06:20:20
Do forum users agree that adding more cameras to the list shown in the post above, will provide the fix for bracketing/custom timer shooting, where needed?
The SD1300 1200 is not currently included in the list of cameras that get this fix but probably should be.

@reyalp : I can't submit patches this week - can you just add it directly ?

Yes, I tested it and it works

Colin
Logged
Ixus 300HS S100


Windows 10
*

Offline reyalp

  • ******
  • 14079
Re: SD1200 IS Porting Thread
« Reply #282 on: 04 / July / 2011, 18:59:41 »
Quote from: hwntw on 04 / July / 2011, 12:30:54
Quote from: waterwingz on 04 / July / 2011, 11:51:54
Quote from: hwntw on 04 / July / 2011, 06:20:20
Do forum users agree that adding more cameras to the list shown in the post above, will provide the fix for bracketing/custom timer shooting, where needed?
The SD1300 1200 is not currently included in the list of cameras that get this fix but probably should be.

@reyalp : I can't submit patches this week - can you just add it directly ?

Yes, I tested it and it works

Colin
Done, changeset 1224
Logged
Don't forget what the H stands for.
*

Offline drworm

  • *
  • 1
Re: SD1200 IS Porting Thread
« Reply #283 on: 25 / December / 2011, 01:19:49 »
I recently found the chdk and have been enjoying all the amazing work that has been done by the group.  thanks!!! 

I have noticed some strange behavior on the SD1200 IS (GM 1.00C) when running the beta CHDK version that I wanted to mention and see if anyone had solutions for.  the main issue is that the menus for scripting and font changing only work once.  After that they do not display properly and are not useable.  To be able to change scripts I have to reset all settings in chdk. Anyhow, I have a workaround and I am really enjoying all the new features. thanks again,

Dave
Logged
*

Offline kaon

  • *
  • 4
Re: SD1200 IS Porting Thread
« Reply #284 on: 16 / February / 2012, 10:13:37 »
Hi all,
 I have an IXUS 95 IS, and using the ver.req file, I see version 1.00C.

I then unzip this package ( ixus95_sd1200-100c-1.0.0-1659-full_BETA.zip ) into my card, then I get to the "firm update" by powering on using the play button. Then when I hit OK to update from 1.0.0.0 to 1.1.0.0, I get a red CHDK logo for half a second, then it goes back to "no image".

And I think the firmware update failed, and there is no effect on the camera. If I repeat going to "firm update" I see the same offer to go from 1.0.0.0 to 1.1.0.0

I do not get anywhere from a locked card.

Do I have to make some changes to the CHDK files for this camera?

And this camera doesn't have a "Direct Print" button, so I've seen mention of using quick press / long press of certain buttons... but I'm not sure..
Logged
*

Offline waterwingz

  • ******
  • 12138
    • Waterwingz
Re: SD1200 IS Porting Thread
« Reply #285 on: 16 / February / 2012, 10:34:01 »
Quote from: kaon on 16 / February / 2012, 10:13:37
Then when I hit OK to update from 1.0.0.0 to 1.1.0.0, I get a red CHDK logo for half a second, then it goes back to "no image".
The appearance of the logo means that you have successfully loaded CHDK.


Quote
I do not get anywhere from a locked card.
Did you follow the steps to make the card bootable first ?


Quote
Do I have to make some changes to the CHDK files for this camera?
No.

Quote
And this camera doesn't have a "Direct Print" button, so I've seen mention of using quick press / long press of certain buttons... but I'm not sure..
I checked the code.  It says that the "Play" button is the <ALT> button.
« Last Edit: 16 / February / 2012, 10:37:28 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline kaon

  • *
  • 4
Re: SD1200 IS Porting Thread
« Reply #286 on: 16 / February / 2012, 11:52:46 »
Quote from: waterwingz on 16 / February / 2012, 10:34:01
Quote from: kaon on 16 / February / 2012, 10:13:37
I do not get anywhere from a locked card.
Did you follow the steps to make the card bootable first ?
OMG, THANK YOU!
I did not do that step with CardTricks.
Weird that I could not find a way to get to the CardTricks GUI from this package: CardTricks-144-SFX.exe
So I just tried running bootable.exe.org (after appending ".exe") with my drive letter, and then chose W then it worked! Yes short press PLAY button worked. THANK YOU.

EDIT:
I loaded INTERVAL.BAS and did some tests, with interval set to 3s, it seems that if you interrupt and restart the intervalometer using the shutter release button, the intervalometer goes crazy, speeding up its snaps and then finally stopping. Is this a known issue? Specific to this camera? I guess I could learn to always shut down the camera before re-starting fresh to restart intervalometer function.
« Last Edit: 16 / February / 2012, 12:16:59 by kaon »
Logged
*

Offline kapuze

  • *
  • 4
Re: SD1200 IS Porting Thread
« Reply #287 on: 23 / March / 2012, 11:37:30 »
I'm trying to get CHDK work on my IXUS95IS/SD1200IS 100b. For that it would be great to have a dump of the version 100c, for which there is a working port of CHDK. But unfortunately the offered links are dead (megaupload is blown up recently and drop.io has been cancelled by facebook 2 years ago!).

So can anybody obtain a firmware dump for SD1200IS 100c (the basic dumper script http://chdk.wikia.com/wiki/Canon_Basic/Scripts/Dumper worked well on my cam).

Martin
Logged
*

Offline waterwingz

  • ******
  • 12138
    • Waterwingz
Re: SD1200 IS Porting Thread
« Reply #288 on: 23 / March / 2012, 11:48:55 »
Its available from http://www.box.com/chdk in the P&S Firmware folder

If you are going to port to a different firmware version,  you might want to look at :

http://chdk.wikia.com/wiki/CHDK-PT_:_A_tool_for_porting_different_firmware_versions_on_the_same_camera
« Last Edit: 23 / March / 2012, 11:54:58 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline kapuze

  • *
  • 4
Re: SD1200 IS Porting Thread
« Reply #289 on: 04 / April / 2012, 12:21:28 »
Hi,

can anybody tell me how to start the chdk from my ixus95 with the firmware update? There is no update firmware option in the menu. How do i make it appear?

Martin
Logged
Pages: 1 ... 24 25 26 27 28 [29] 30 31 32   Go Up
« previous next »
 

Related Topics