SD980 beta release - page 19 - CHDK Releases - CHDK Forum

SD980 beta release

  • 376 Replies
  • 161098 Views
Re: SD980 beta release
« Reply #180 on: 11 / June / 2011, 19:06:48 »
Advertisements
Okay - here's the full build with everything turned on.  Start testing !

CHDK for the IXUS200-SD980 firmward 1.01c

UPDATE : file updated 2011Jun12 to include philmoz fixes and built against trunk 1204
« Last Edit: 12 / June / 2011, 09:12:16 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline james

  • *
  • 10
Re: SD980 beta release
« Reply #181 on: 11 / June / 2011, 19:35:56 »
autoboot dont works  :(

Re: SD980 beta release
« Reply #182 on: 11 / June / 2011, 20:05:58 »
autoboot dont works  :(

Strange - did it work with the Test4 version a few posts back ?

Update :  I loaded it on my camera (not an SD980) just to see it autoboot, blink the AF led and then crash (as expected - wrong camera).   So autoboot does work - you might have missed a step in configuring your SD card ?  Did you remember to put the lock switch into the lock position ?  What formatting procedure did you follow ?

« Last Edit: 11 / June / 2011, 20:15:46 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline james

  • *
  • 10
Re: SD980 beta release
« Reply #183 on: 11 / June / 2011, 20:34:58 »
locked switch - ok, formated with card tricks fat16 - ok, decompressed your file with card tricks to 2GB sdcard - ok, maked sdcard bootable - ok. Nothing else to do.

Re: SD980 beta release
« Reply #184 on: 11 / June / 2011, 20:47:38 »
locked switch - ok, formated with card tricks fat16 - ok, decompressed your file with card tricks to 2GB sdcard - ok, maked sdcard bootable - ok. Nothing else to do.
I'm going to need a little more information if I'm going to be able to help here.  What happens when you press the "Play" button to start (rather than the on/off switch) ?   Does the AF led and green LED come on briefly and then the Orange LED ?  Or does the display just say "Card Locked" ?

Also, did you try the Test4 version posted earlier ? I have confirmation that autoboot works with that file.

Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline james

  • *
  • 10
Re: SD980 beta release
« Reply #185 on: 11 / June / 2011, 21:10:35 »
I tested both files for 1.01c. WHEN I push the play button the green LED is blinking. The display shows only "no image".

Re: SD980 beta release
« Reply #186 on: 11 / June / 2011, 21:26:58 »

progress!  cardtricks-->2GB--->locked  turning on with play/review button gets the CHDK logo screen! (in orange, my favorite color, too)

autofocus led also blinks rapidly, i am able to read build info on splash screen, it lasts maybe 3 seconds, then shuts down, but does NOT lock up the camera; i can continue to turn on, and it tries to autoboot before shutting down.

what do we do next?

i was starting to think i would just have to sell this and get an SD940, but i REALLY want the 22/24mm wide angle lens on the 980- one of the main reasons for wanting this model.

waterwingz, you rock.

Re: SD980 beta release
« Reply #187 on: 11 / June / 2011, 23:14:46 »
autofocus led also blinks rapidly, i am able to read build info on splash screen, it lasts maybe 3 seconds, then shuts down, but does NOT lock up the camera; i can continue to turn on, and it tries to autoboot before shutting down.
What do the last 8 words mean? Sounds like the camera starts up with CHDK running -  the logo is supposed to display for about 3 seconds and then clear.  Does the camera stay running at that point or shut down (crash).  Can you press the Display button, get the <ALT> indicator on the screen and then the CHDK menus when you press Menu ?

It the camera crashes,   did it crash the same way when you were running the Test4 version ?

Quote
i was starting to think i would just have to sell this and get an SD940, but i REALLY want the 22/24mm wide angle lens on the 980- one of the main reasons for wanting this model.
The SD940 is a really nice camera.  8)

Quote
waterwingz, you rock.
Thanks - but there is still a lot of work to do to make this port stable and I only have a little time available.  Progress will slow down - I was hoping that once I had it building & booting (a BIG step) somebody with a little software knownledge could take over the debugging.  We will see.

Ported :   A1200    SD940   G10    Powershot N    G16

Re: SD980 beta release
« Reply #188 on: 11 / June / 2011, 23:19:04 »
I tested both files for 1.01c. WHEN I push the play button the green LED is blinking. The display shows only "no image".
As jamabushi reports autoboot working properly,  I have to assume something else is wrong.  For example,  if CHDK does not autoboot and the SD card lock switch is in the lock position,  you should get a "Card Locked" error message - not "no image".
Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: SD980 beta release
« Reply #189 on: 11 / June / 2011, 23:19:44 »

Thanks - but there is still a lot of work to do to make this port stable and I only have a little time available.  Progress will slow down - I was hoping that once I had it building & booting (a BIG step) somebody with a little software knownledge could take over the debugging.  We will see.


I have some time to look at the code if you want to send me a copy.

Phil.
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)

 

Related Topics


SimplePortal © 2008-2014, SimplePortal