SD980 beta release - page 22 - CHDK Releases - CHDK Forum
« previous next »
Pages: 1 ... 17 18 19 20 21 [22] 23 24 25 26 27 ... 38   Go Down

SD980 beta release

  • 376 Replies
  • 159814 Views
*

Offline titbb

  • *
  • 38
Re: SD980 beta release
« Reply #210 on: 12 / June / 2011, 15:47:31 »
Advertisements
i tried the latest recompile from waterwingz, works same, no pf2 file though, so autoboot is only option
also, the back option in the menu, when you are located in the scripting parameters doesn't work

i also cant seem to get the +2 0 -2 ev continious bracketing to work in here
Logged
*

Offline maxbaron

  • *
  • 9
Re: SD980 beta release
« Reply #211 on: 12 / June / 2011, 16:32:14 »
Hi,
RAW file works fine but I'm unable to open the CRW file. Any suggestions?
Max
Logged
*

Offline titbb

  • *
  • 38
Re: SD980 beta release
« Reply #212 on: 12 / June / 2011, 16:37:15 »
Quote from: maxbaron on 12 / June / 2011, 16:32:14
Hi,
RAW file works fine but I'm unable to open the CRW file. Any suggestions?
Max


Use the searchfunction. It has been mentioned so many times ...
Canon uses a diff kind of normal raw.
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: SD980 beta release
« Reply #213 on: 12 / June / 2011, 21:07:13 »
Quote from: titbb on 12 / June / 2011, 16:37:15
Quote from: maxbaron on 12 / June / 2011, 16:32:14
Hi,
RAW file works fine but I'm unable to open the CRW file. Any suggestions?
Max


Use the searchfunction. It has been mentioned so many times ...
Canon uses a diff kind of normal raw.


http://chdk.wikia.com/wiki/Raw
http://chdk.setepontos.com/index.php?topic=1532.0

Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline maxbaron

  • *
  • 9
Re: SD980 beta release
« Reply #214 on: 13 / June / 2011, 13:11:59 »
Quote from: waterwingz on 12 / June / 2011, 21:07:13
Quote from: titbb on 12 / June / 2011, 16:37:15
Quote from: maxbaron on 12 / June / 2011, 16:32:14
Hi,
RAW file works fine but I'm unable to open the CRW file. Any suggestions?
Max


Use the searchfunction. It has been mentioned so many times ...
Canon uses a diff kind of normal raw.


http://chdk.wikia.com/wiki/Raw
http://chdk.setepontos.com/index.php?topic=1532.0


Thank for your suggestions :)
...now, I'm having some trouble when shot a photo: info on display shows, for example, 60/2.8 but the camera shutter stays open for much longer time and taken photos are all over exposed.
This issue occours also in fresh installed firmware.
Logged
*

Offline simon96

  • *
  • 26
Re: SD980 beta release
« Reply #215 on: 13 / June / 2011, 14:33:05 »
Wow, i'm still impressed that finally I at least see the CHDK menu on my 200IS.
I was waiting for sooo long ;-)


Here are my first impressions of version TEST5:

Boots okay in Card Lock Boot Method AND in Firmware Update Method.

Extra Photo Operations: Seems like settings here have no effect whatsoever.
Video Parameters: Did not look into that.
Raw Parameters: Seems okay at first glance
Edge Overlay: Did not look into that.
Histogram Parameters: Live histograms are not working.
Zebra Parameters: If it is supposed to show up in live view (pressing shutter half) then it's not working.
OSD: Mostly working. Layout Editor working. Grid is not showing up. Battery percentage info seems wrong (shows 0).
Visual settings: working
Scripting Parameters: Scripts get loaded and can be started. However camera seems not to shoot (e.g. interval script is starting ok but no shooting at all).
Misc stuff: Did not test remote function.

Also noticed that somehow all pics get overexposed.

Simon
« Last Edit: 13 / June / 2011, 14:48:07 by simon96 »
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: SD980 beta release
« Reply #216 on: 14 / June / 2011, 00:24:24 »
Quote from: simon96 on 13 / June / 2011, 14:33:05
Here are my first impressions of version TEST5:

Boots okay in Card Lock Boot Method AND in Firmware Update Method.

Extra Photo Operations: Seems like settings here have no effect whatsoever.
Video Parameters: Did not look into that.
Raw Parameters: Seems okay at first glance
Edge Overlay: Did not look into that.
Histogram Parameters: Live histograms are not working.
Zebra Parameters: If it is supposed to show up in live view (pressing shutter half) then it's not working.
OSD: Mostly working. Layout Editor working. Grid is not showing up. Battery percentage info seems wrong (shows 0).
Visual settings: working
Scripting Parameters: Scripts get loaded and can be started. However camera seems not to shoot (e.g. interval script is starting ok but no shooting at all).
Misc stuff: Did not test remote function.

Also noticed that somehow all pics get overexposed.
Great start to a testing list Simon.    As stated earlier,  not much time to work on this right now.   I suspect it needs a couple of hours looking at the values in stubs_min.S and lib.c - not sure these were well tested during the original port.

It would be interesting to know if movie recording still works ?  Can you change the video quality if so ?  (note : fast SD card required at top quality setting or recording will stop after a few seconds).  Can you zoom the lens manually during video recording ?

I will give you one "free fix".  The default range for the battery icon in the OSD is most likely set too high.  You can change this in the OSD setup parameters - try setting the min to 0 and the max to 5V and see if you get a reading somewhere between that.  With most cameras, you need to test a fully charged battery and then with a battery that has just reached the point of shutting down the camera to determine the correct range. Post the results here and I will change the defaults.





Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline maxbaron

  • *
  • 9
Re: SD980 beta release
« Reply #217 on: 14 / June / 2011, 12:28:20 »
Quote from: waterwingz on 14 / June / 2011, 00:24:24
Quote from: simon96 on 13 / June / 2011, 14:33:05
Here are my first impressions of version TEST5:

Boots okay in Card Lock Boot Method AND in Firmware Update Method.

Extra Photo Operations: Seems like settings here have no effect whatsoever.
Video Parameters: Did not look into that.
Raw Parameters: Seems okay at first glance
Edge Overlay: Did not look into that.
Histogram Parameters: Live histograms are not working.
Zebra Parameters: If it is supposed to show up in live view (pressing shutter half) then it's not working.
OSD: Mostly working. Layout Editor working. Grid is not showing up. Battery percentage info seems wrong (shows 0).
Visual settings: working
Scripting Parameters: Scripts get loaded and can be started. However camera seems not to shoot (e.g. interval script is starting ok but no shooting at all).
Misc stuff: Did not test remote function.

Also noticed that somehow all pics get overexposed.
Great start to a testing list Simon.    As stated earlier,  not much time to work on this right now.   I suspect it needs a couple of hours looking at the values in stubs_min.S and lib.c - not sure these were well tested during the original port.

It would be interesting to know if movie recording still works ?  Can you change the video quality if so ?  (note : fast SD card required at top quality setting or recording will stop after a few seconds).  Can you zoom the lens manually during video recording ?

I will give you one "free fix".  The default range for the battery icon in the OSD is most likely set too high.  You can change this in the OSD setup parameters - try setting the min to 0 and the max to 5V and see if you get a reading somewhere between that.  With most cameras, you need to test a fully charged battery and then with a battery that has just reached the point of shutting down the camera to determine the correct range. Post the results here and I will change the defaults.
I made some tests in video mode and it seems works fine. Increasing "Video quality" I noticed also bitrates value is bigger but my sd is not very fast and the video was not really smooth.
Zoom works too but until you are inside the optical range, if enter in digital zoom you can't come back to optical.
I hope you help.
P.S. please please please take a look to raw  issue :)
 
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: SD980 beta release
« Reply #218 on: 14 / June / 2011, 13:09:30 »
Quote from: maxbaron on 14 / June / 2011, 12:28:20
Zoom works too but until you are inside the optical range, if enter in digital zoom you can't come back to optical.
Got the same complaint on the A495 port.  My SD940 does this as well so it seems to be a generic CHDK problem rather than port specific.

Quote
P.S. please please please take a look to raw  issue :)
What raw issue ? Your earlier post only says "Raw Parameters: Seems okay at first glance"

Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline maxbaron

  • *
  • 9
Re: SD980 beta release
« Reply #219 on: 14 / June / 2011, 13:12:58 »
Quote from: waterwingz on 14 / June / 2011, 13:09:30
Quote from: maxbaron on 14 / June / 2011, 12:28:20
Zoom works too but until you are inside the optical range, if enter in digital zoom you can't come back to optical.
Got the same complaint on the A495 port.  My SD940 does this as well so it seems to be a generic CHDK problem rather than port specific.

Quote
P.S. please please please take a look to raw  issue :)
What raw issue ? Your earlier post only says "Raw Parameters: Seems okay at first glance"



Here it is:
Quote
...now, I'm having some trouble when shot a photo: info on display shows, for example, 60/2.8 but the camera shutter stays open for much longer time and taken photos are all over exposed.
This issue occours also in fresh installed firmware.
Logged
Pages: 1 ... 17 18 19 20 21 [22] 23 24 25 26 27 ... 38   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal