SD980 beta release - page 35 - CHDK Releases - CHDK Forum
« previous next »
Pages: 1 ... 30 31 32 33 34 [35] 36 37 38   Go Down

SD980 beta release

  • 376 Replies
  • 154758 Views
*

Offline simon96

  • *
  • 26
Re: SD980 beta release
« Reply #340 on: 05 / August / 2011, 17:14:33 »
Advertisements
@waterwingz:
Thanks for the update ;-)

@Greg:
If you could provide a firmware dump of version 1.00, i'm sure someone could port chdk easily now that we have a working port for 1.01.
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: SD980 beta release
« Reply #341 on: 05 / August / 2011, 17:27:04 »
Quote

@Greg:
If you could provide a firmware dump of version 1.00, i'm sure someone could port chdk easily now that we have a working port for 1.01.
He has 1.00C judging by his post - the same version Radup was working on at the start of this thread.  

UPDATE : if I can get a valid ROM dump, I'll do the port at some point (unless someone else is happy to do it first) but I'm on vacation for the next couple of weeks and away from my PC
« Last Edit: 06 / August / 2011, 02:15:51 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline Greg

  • *
  • 4
Re: SD980 beta release
« Reply #342 on: 07 / August / 2011, 09:20:08 »
Thanks for your responses..

I'm happy to follow instructions !! but need some hand holding I'm afraid.

I'm struggling to understand the relationship between the dump of my firmware and the "port" - presumably this is because the CHDK software for this camera is in Beta ?

I have no idea how to do a dump of the firmware...

I also confused about the relationship of the ""step one" of viewing the firmware version on the camera  which implies that the "vers file" is written to during this step... which I assume  is a pre-requisite for the bin bootfile file to work ....as it reads the ver file??

In which case.. wouldn't this need to be created in a different way because the type of camera (with its touch screen and all) that doesn't seem to accept the key press roll the finger thing as suggested in earlier posts.

Like I said - happy to follow instructions - and appreciate the expertise on the forum - fingers crossed I'll get this working :)

Greg
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: SD980 beta release
« Reply #343 on: 07 / August / 2011, 20:16:26 »
Quote from: Greg on 07 / August / 2011, 09:20:08
Thanks for your responses..

I'm happy to follow instructions !! but need some hand holding I'm afraid.

I'm currently travelling on vacation so can't manage a long explanation from my mobile device.  There is probably a valid firmware dump for your camera already but I can't check that easily while on the road.  If there is, then about the only thing you can do is wait for someone to convert the current port to work with your firmware version.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline simon96

  • *
  • 26
Re: SD980 beta release
« Reply #344 on: 08 / August / 2011, 03:46:51 »
@Greg:
CHDK software needs some porting (or adjusting if you will) for every camera AND every firmware version due to some small differences in each firmware. So in order to get CHDK running on your camera/firmware setup you first of all need to determine your firmware version. Look in the WIKI for further information on that topic if you are interested e.g. in vers.req.
 
But you already know your firmware version and have noticed that there currently is no v1.00c adjusted port of CHDK software.

So in order to build it one would need a firmware dump of the v1.00c firmware. If you want to provide one have a look at the wiki "How to dump firmware" to get an brief overview on how you could achieve this. I think you want to use Cardtricks. Also look have a look through this thread. Someone lately dumped an other version. So maybe there you get more input on how he did it.
Firmware dump results in a ~8mb file. Upload it here.

Logged
*

Offline Greg

  • *
  • 4
Re: SD980 beta release
« Reply #345 on: 08 / August / 2011, 12:08:52 »
Many Thanks All..
Found the correct CHDK Software on the German site mentioned through the thread
http://chdk.bplaced.net/content/download/viewcategory/8.html

I should be OK now

Thanks again

Greg
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: SD980 beta release
« Reply #346 on: 08 / August / 2011, 15:24:50 »
Quote from: Greg on 08 / August / 2011, 12:08:52
Many Thanks All..
Found the correct CHDK Software on the German site mentioned through the thread
http://chdk.bplaced.net/content/download/viewcategory/8.html

I should be OK now

Thanks again

Greg
@Greg :  as we worked on the later firmware versions of the SD980, it was not clear how well the 1.00C version in the CHDK-DE server actually worked.   Please report back here with what you find.  When I get a moment to create a version for the CHDK sever, your feedback and help testing will be essential


Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline openuas

  • **
  • 58
  • OpenUAS
    • OpenUAS
Re: SD980 beta release
« Reply #347 on: 11 / August / 2011, 17:23:07 »
Thanks waterwingz. :D... I was already wondering why the build was not in the Autobuild server releases. So much effort was given for the 100C version, would be a waste not to have it in Autobuild. I had to dig it up from here http://chdk.bplaced.net/content/download/summary/8/33.html

As I do have two IXUS 200/S980 - one 100C and one 101C model. I thus can perform a functionality comparison test easily. Also have Gentled USB cable and model 2 for functions-test over RC pulses in.

So, I'll await the 100C on autobuild then will do comparison tests.
Logged
*

Offline openuas

  • **
  • 58
  • OpenUAS
    • OpenUAS
Re: SD980 beta release
« Reply #348 on: 13 / August / 2011, 17:42:13 »
Did a remote shutter test. It worked for IXUS200 and not for the IXUS100. Did the test on IXUS 100 with SDM and the shutter worked, that maybe a good hint to fix it ? Will retest with some other settings on the IXUS 100. Will do more tests if there is an autobuild version for the IXUS 100 v100c but will not polute this thread with that info then.

OK, now I'm on to more IXUS00/SD980 tests, and hope to speed-up the time between pictures by tweaking some values.
« Last Edit: 13 / August / 2011, 17:44:05 by openuas »
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: SD980 beta release
« Reply #349 on: 13 / August / 2011, 18:27:02 »
Quote from: openuas on 13 / August / 2011, 17:42:13
Did a remote shutter test. It worked for IXUS200 and not for the IXUS100. Did the test on IXUS 100 with SDM and the shutter worked, that maybe a good hint to fix it ? Will retest with some other settings on the IXUS 100. Will do more tests if there is an autobuild version for the IXUS 100 v100c but will not polute this thread with that info then.

OK, now I'm on to more IXUS00/SD980 tests, and hope to speed-up the time between pictures by tweaking some values.

Posted in the wrong forum for the IXUS100 comments ?   Regardless,  you might want to look at doing the port to 1.00C yourself ?  With the new sig finder and CHDK-PT its a much easier !
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
Pages: 1 ... 30 31 32 33 34 [35] 36 37 38   Go Up
« previous next »
 

Related Topics
SimplePortal 2.3.6 © 2008-2014, SimplePortal