SD980 beta release - page 17 - CHDK Releases - CHDK Forum

SD980 beta release

  • 376 Replies
  • 130545 Views
*

Offline titbb

  • *
  • 38
Re: SD980 beta release
« Reply #160 on: 09 / June / 2011, 04:23:19 »
Advertisements
I tried to dump the OS with the cardtricks tool, i tried all 3 OS, new dryos, dryon and vxworks. Card locked.

Only the new dryos stayed on the black screen, but doesnt write ANYthing.
So, i cant help much more for the OS dump, since it doesnt seem to work for me :(

Re: SD980 beta release
« Reply #161 on: 09 / June / 2011, 06:42:15 »
I tried to dump the OS with the cardtricks tool, i tried all 3 OS, new dryos, dryon and vxworks. Card locked. Only the new dryos stayed on the black screen, but doesnt write ANYthing. So, i cant help much more for the OS dump, since it doesnt seem to work for me

As noted here : "You can not use CardTricks to dump 'newer' DryOS cams".   You need to use the  Canon BASIC Dumper

Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline titbb

  • *
  • 38
Re: SD980 beta release
« Reply #162 on: 09 / June / 2011, 08:22:56 »
Ok, my bad.

Used the proper way mentioned @ http://chdk.wikia.com/wiki/Canon_Basic/Card_Setup

I managed to get a 8mb dump of the OS. Ill upload in a bit

http://www.megaupload.com/?d=89QCBPBR
« Last Edit: 09 / June / 2011, 08:28:37 by titbb »

Re: SD980 beta release
« Reply #163 on: 09 / June / 2011, 15:09:41 »

thanks for that, titbb,  work got in my way.

waterwingz, is that the data you're looking for?

i'll probably do a dump 'just because'.


Re: SD980 beta release
« Reply #164 on: 09 / June / 2011, 17:31:08 »
waterwingz, is that the data you're looking for?
Looks about right - we will have to see how it runs through philmoz's new sigfinder.

I would also be nice if somebody could dump and post an 8G file for firmware 1.00c.

Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline fe50

  • ******
  • 3139
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: SD980 beta release
« Reply #165 on: 10 / June / 2011, 01:50:23 »
Thanks titbb, added your IXUS200_SD980 1.01C full (8mb) dump to the box.net/chdk repository.

*

Offline titbb

  • *
  • 38
Re: SD980 beta release
« Reply #166 on: 10 / June / 2011, 15:50:14 »
Cool cool, let's hope its of use to @philmoz

Re: SD980 beta release
« Reply #167 on: 10 / June / 2011, 20:55:29 »
Cool cool, let's hope its of use to @philmoz
philmoz sent me the signature analysis for that file - working with it now

« Last Edit: 10 / June / 2011, 21:29:58 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16


Re: SD980 beta release - firmware 1.01c
« Reply #168 on: 10 / June / 2011, 21:27:07 »
Okay - first try at a new build. Philmoz's new stub addresses and a new boot.c from the 8G dump using more current code stolen from the A495 and S95.

SD980 firmware 1.01c Beta 2

Should slam all the LED's fully ON as the very first thing it does once the loader boots CHDK.  So if this does not run, do the LED's at least turn on right away ?

(in the unlikely event CHDK boots fully,  I turned off all the other tasks for now so other than menus and games,  nothing else will work)



« Last Edit: 10 / June / 2011, 21:32:40 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline titbb

  • *
  • 38
Re: SD980 beta release
« Reply #169 on: 11 / June / 2011, 02:03:00 »
First off all, i appreciate the effort! Shame i have no programming knowledge whatsoever to help more in htat regard :(

I used cardtricks on a 512mb card, formatted it, made it bootable and used the chdk -> card part, locked it, inserted into camera and pressed play.

Just got a No Image, Card Locked notice, nothing else happens unfortunately.

 

Related Topics