Executing Event Procedures by name - page 3 - General Discussion and Assistance - CHDK Forum
« previous next »
Pages: 1 2 [3] 4 5   Go Down

Executing Event Procedures by name

  • 43 Replies
  • 28926 Views
*

Offline ewavr

  • ****
  • 1057
  • A710IS
Re: Executing Event Procedures by name
« Reply #20 on: 26 / December / 2009, 05:44:07 »
Advertisements
Quote from: reyalp on 26 / December / 2009, 05:26:07
Well, it's a nice paperweight with a yellow LED.
Bad news...

Quote from: reyalp on 26 / December / 2009, 04:14:22
Don't play with the "factory mode" stuff unless you are very sure what you are doing.

May camera be in factory mode? How about USB connection, it works?
Logged
*

Offline reyalp

  • ******
  • 14128
Re: Executing Event Procedures by name
« Reply #21 on: 26 / December / 2009, 05:52:07 »
Quote from: ewavr on 26 / December / 2009, 05:44:07
May camera be in factory mode? How about USB connection, it works?
:o

If I plug it in, I get new hardware found "DCP connect". Naturally, windows does not have a driver for it. Libusb test program doesn't see it. Shows up as an unknown device in dev manager.

Oh, and I get green and yellow led.

edit:
lsusb on linux says ID 04a9:3086 Canon Inc.
« Last Edit: 26 / December / 2009, 05:54:34 by reyalp »
Logged
Don't forget what the H stands for.
*

Offline ewavr

  • ****
  • 1057
  • A710IS
Re: Executing Event Procedures by name
« Reply #22 on: 26 / December / 2009, 06:02:36 »
Quote from: reyalp on 26 / December / 2009, 05:52:07
If I plug it in, I get new hardware found "DCP connect".
Indeed, this is factory mode.
So, CHDK (in minimal configuration, boot.c only without spytask ) can be loaded?
Logged
*

Offline reyalp

  • ******
  • 14128
Re: Executing Event Procedures by name
« Reply #23 on: 26 / December / 2009, 06:12:34 »
Quote from: ewavr on 26 / December / 2009, 06:02:36
Quote from: reyalp on 26 / December / 2009, 05:52:07
If I plug it in, I get new hardware found "DCP connect".
Indeed, this is factory mode.
So, CHDK (in minimal configuration, boot.c only without spytask ) can be loaded?
I'm working on that, thanks for your hints :)
Logged
Don't forget what the H stands for.
*

Offline reyalp

  • ******
  • 14128
Re: Executing Event Procedures by name
« Reply #24 on: 26 / December / 2009, 06:22:03 »
Yay

ClearFactoryMode()


Thanks ewavr!
Logged
Don't forget what the H stands for.
*

Offline Microfunguy

  • ****
  • 4037
    • StereoData Maker
Re: Executing Event Procedures by name
« Reply #25 on: 26 / December / 2009, 07:07:00 »
That is the first recorded 'bricking' of a camera by CHDK and definitely the first disaster-recovery !

Logged
*

Offline reyalp

  • ******
  • 14128
Re: Executing Event Procedures by name
« Reply #26 on: 26 / December / 2009, 07:21:43 »
Quote from: Microfunguy on 26 / December / 2009, 07:07:00
That is the first recorded 'bricking' of a camera by CHDK and definitely the first disaster-recovery !
Wasn't really bricked, luser error.  :-[

I wanted to see what factory mode looked like. Turns out, it looks like a brick! But the camera is actually running. Even CHDK was running, but it doesn't display and PTP doesn't load.

But yeah, I'll be a little more cautious before calling random eventprocs.

So
FA.Create registers the factory mode functions.
SetFactoryMode (I think, I tried several) sets something in ROM which indicates factory mode.
ClearFactoryMode undoes the ROM setting. ClearFactoryMode can be called from CHDK spytask with the appropriate wrapper.

Both call WRITEADJTABLETOFROM which I guess does the deed. I wonder if this means my original factory adjustments have been nuked ?

If anyone wants to roll the dice, there's also
SetDurianMode
ClearDurianMode

Durian ?!?
Logged
Don't forget what the H stands for.
*

Offline PhyrePhoX

  • *****
  • 2254
  • make RAW not WAR
    • PhyreWorX
Re: Executing Event Procedures by name
« Reply #27 on: 26 / December / 2009, 08:01:49 »
haha, "don't forget what the H stands for" never made more sense than in this thread :D
great you recovered the cam.
 
Logged
*

Offline whoever

  • ****
  • 280
  • IXUS950
Re: Executing Event Procedures by name
« Reply #28 on: 26 / December / 2009, 12:31:21 »
Congratulations on the quick success! And "durian" definitely sounds like an irresistible temptation, what a pity that I don't have one in my cam...

Now, after the happy end, I admit it was a bit of disappointment, -- I actually hoped that we would get a working flasher in the end of your adventure. Alas, let's wait till ewavr bricks his ;)

P.S. Thanks, Wim. Very sobering, indeed.
« Last Edit: 26 / December / 2009, 13:27:41 by whoever »
Logged
*

Offline fe50

  • ******
  • 3152
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: Executing Event Procedures by name
« Reply #29 on: 26 / December / 2009, 12:39:03 »
Quote from: reyalp on 26 / December / 2009, 07:21:43
Both call WRITEADJTABLETOFROM which I guess does the deed. I wonder if this means my original factory adjustments have been nuked ?
I guess rather not...let badpixel.lua report the bad pixels from your reanimated bady...

*EDIT: did you check the SD card ? maybe there are some log files, like DC97/MISC/CANON/FACTORY/RSTFNO

PS: would be nice if we could find a Canon service manual for one of the newer Powershots,
i guess the service tools & procedures should be similar on many cameras,
as on the good old Pixma IPxxx printer series...

BTW - Yeah: Don't forget what the H stands for.  :haha
« Last Edit: 26 / December / 2009, 12:47:47 by fe50 »
Logged
Pages: 1 2 [3] 4 5   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal