Problems with S90

fasciatus

« on: 24 / May / 2010, 09:14:53 »

Advertisements

HI,

I can to update de chdk to my S90, but only when playback button and de lens moving back. Then I can acces to chdk menu.
OK, but, when I want to use de chdk advantage I can't, cause de camera is in stand by.
When I press de button to take photos, the chdk dissapeare

I'm very interested in usb cable remote for digiscoping.

Have enybody know about that?
Enybody can help me?
Thanks for all from Spain.

Mark

Logged

fe50

3139
IXUS50 & 860, SX10 Star WARs-Star RAWs

Re: Problems with S90

« Reply #1 on: 25 / May / 2010, 01:11:46 »

Hello & welcome, Mark !

Quote from: fasciatus on 24 / May / 2010, 09:14:53

I can to update de chdk to my S90, but only when playback button and de lens moving back.

CHDK is not a firmware update, just a software addition.
You can either start with the autostart feature or by loading CHDK manually with the "Firmware Update" menu item; start the camera in playback mode (with the [>] button), press/half-press the shutter button once to switch to record mode.

To enter/leave the CHDK <Alt> mode press the PRINT/SHORTCUT button
To enter the CHDK main menu, first enter <Alt> mode, then press MENU
To use CHDK overrides, set them up in the CHDK menu, then leave <Alt> mode
To use a script, load you script (in <Alt> mode) and start/stop the script with the shutter button

I suggest to read
* http://chdk.wikia.com/wiki/FAQ
* http://chdk.wikia.com/wiki/CHDK_firmware_usage
* http://chdk.wikia.com/wiki/CHDK_User_Manual

Logged

-->FIRMWARE DUMPS<-- * Manual * Lua * me

fasciatus

Re: Problems with S90

« Reply #2 on: 25 / May / 2010, 06:51:22 »

Thanks for your answer.
The steps are:
1- To enter in the CHDK menu, it's necessary to press play back button when de lens is in the stand by position. I can't to access if the lens is in the normal position.
2- I enter in the CHDK menu ok, but I can't work becouse when I exit to stand by position, and I exit to the CHDK menu too. Therefore I can't take photos in the CHDK menu!!

Enybody has worked ok with s90 and CHDK menu?

My firmware is 1.00C

Thanks for your answer!
Mark

Logged

fe50

3139
IXUS50 & 860, SX10 Star WARs-Star RAWs

Re: Problems with S90

« Reply #3 on: 25 / May / 2010, 07:25:57 »

Quote from: fasciatus on 25 / May / 2010, 06:51:22

1- To enter in the CHDK menu, it's necessary to press play back button when de lens is in the stand by position. I can't to access if the lens is in the normal position.

No; CHDK stays active until the camera is powered off.
I guess you're using the manual loading method with "Firmware Update":

Quote from: fe50 on 25 / May / 2010, 01:11:46

...press/half-press the shutter button once to switch to record mode.

Quote

but I can't work becouse when I exit to stand by position, and I exit to the CHDK menu too.

No; once loaded, CHDK stays active until you power off the camera.
The CHDK menu is only used to set up overrides & settings - when you're ready, exit the CHDK menu with the MENU button, then exit <Alt> mode with PRINT.
"<ALT> mode will disable your normal camera buttons and will give them an alternative meaning." "This mode is normally off! You only need it for the main configuration menu, starting a script and other shortcuts."

Quote

Therefore I can't take photos in the CHDK menu!!

In <Alt> mode you can either open the CHDK menues or you can run scripts - you can't shoot in <Alt> mode.
Close the menu / exit <Alt> mode to capture images/videos, the settings/overrides you've adjusted in the CHDK menu will still be active !

Again - i suggest to read more in the CHDK wikia