Hello Im trying to install the CHDK in my
canon G7 Powershot and I cannot acces to the OSD of the CHDK and i couldnt access neither to the splash screen.
I have a
mac and a card reader ( Trust brand) , my memory card is
SD 4GB Extrememory , I used the
Alternate scripted method indicated in the wiki for mac users, i achieve to split the card in two partitions CHDK - small fat16 partition and CAMCARD -big partition .
At this point everything goes well, i insert the card to check the firmware and i see that is "
1.0.0.i" . I extract the card and put it again in the card reader , I download the small zip for this firmware "g7-100i-0.9.8-824.zip " . I put the two files "DISKBOOT.bin" and "PS.FIR" inside the small partition- CHDK. I lock the card and when i insert the card the camera says me that the card is locked, os i cannot take picture
I unlock the card and i try to upgrade the firmware but i dont find the way in this camera to check the option of upgrade firmware or to access the splash screen.
I dont know if is a problem of the combination of the buttons i have to press in my camera model or if i put the files of the chdk in the wrong partition, i tryed to put them in the big partition but doent work.
Maybe the problem is that i can see the two paritions like if i would wave two different drives, in fact i have to extract from the mac os system the two separately.
Please i hope someone could help me.
