let me ask, if I got it right now:
enable_synch generaly enables the wait until shutter / usb switch is released, this is clear.
releasing shutter button starts to open shutter on both cams.
Flash of left cam fires immediately with 1/16 power.
if enable_synch_delay is set to enabled, then the flash of right cam gets a delay of max. 40 units (arround 4 msec.).
During this 4 msec. the left cam has time to open shutter completely. So chance is bigger that left cam also gets the flash - with shutter completely opened - am I right?
'Add User and flash delays' has only an effect if I use the 'fine delay' and / or 'coarse delay' - right?
If I set coarse delay to e.g. 50, that means photo is taken 5 sek after is button released - right?
If I set 'Add User and flash delays' to disabled, then the flash fires exactly after 5 sek - right?
If I set 'Add User and flash delays' to enabled, then the flash fires after 5 sek plus the 40 units delay (arr. 4 msec.) - right?
Is this correct?