S90 Porting Thread

  • 397 Replies
  • 77759 Views
  • Publish
    Re: S90 Porting Thread
    « Reply #70 on: 31 / March / 2010, 12:21:42 »
    Advertisements
    Thanks for your clear reply!
    So we just can wait  and hope for an amazing result of CHDK into the S90!!!It will be great!
    bye
    590
    S90

  • Publish
    Re: S90 Porting Thread
    « Reply #71 on: 05 / April / 2010, 06:54:46 »
    I have emailed rachelkitty and battika to ask if they can upload their compilable code somewhere so that others can attempt to take this forward.

    It would be a shame to waste their effort and have to start from 'scratch'.


    David

    *

    Offline ERR99

    • ****
    • 339
  • Publish
    Re: S90 Porting Thread
    « Reply #72 on: 08 / April / 2010, 11:13:48 »
    Not much porting activity here anymore, as i see...
    Anyway, unfortunately for my bankaccount balance, i could not resist to buy a S90.   :P
    It has a "new" Firmware: 101a. The modified udumper from the G11 port was also working on the S90, so here ist the dump of the new firmware: http://www.zshare.net/download/74742478986973cd/

  • Publish
    Re: S90 Porting Thread
    « Reply #73 on: 08 / April / 2010, 12:04:18 »
    rachelkitty and battika never responded to my emails but I am glad to say that ERR99 did (see above).

    I am quite sure this camera will be ported very soon   :)


    *

    Offline fe50

    • ******
    • 3033
    • IXUS50 & 860, SX10 Star WARs-Star RAWs
      • fe50
  • Publish
    Re: S90 Porting Thread
    « Reply #74 on: 09 / April / 2010, 01:22:31 »
    Added the S90 1.01A dump from this post (8MB, from ERR99, dumped with a modified G11 udumper) to the drop.io - chdkdumps2 backup archive.
      http://drop.io/chdkdumps2/asset/s90-101a-7z
    Thx to the 'dumpers' & uploaders !

    *

    Offline ERR99

    • ****
    • 339
  • Publish
    Re: S90 Porting Thread
    « Reply #75 on: 10 / April / 2010, 12:39:11 »
    Today i got some porting progress on the 101a firmware, i think...   :D

  • Publish
    Re: S90 Porting Thread
    « Reply #76 on: 10 / April / 2010, 13:50:29 »
    Excellent !

    At least there is nothing special about the bitmap overlay.

    From now on, it should just be the tedious process of checking function and variable addresses, getting keyboard, movie, image-capture and possibly dual-partitioning working.

    Don't know if you bothered about supporting the firmware-update method, personally I do not.


    David

  • Publish
    Re: S90 Porting Thread
    « Reply #77 on: 10 / April / 2010, 17:18:53 »
    Hey Err99 :D

    Nice to see U here ! ! !

    You will not regread it - the S90 is my favorite little "takewithme" Cam.

    But my Firmware is the 1.00C - so I can`t use your dump.

    Please be so gentlelike and bring me in  :)

    greetzz

    genervi


    *

    Offline ERR99

    • ****
    • 339
  • Publish
    Re: S90 Porting Thread
    « Reply #78 on: 10 / April / 2010, 18:04:51 »
    Porting is going on very well. I got now the keyboard & jogdial stuff up&running, so i can navigate through all the CHDK menus.
    Exposure overrides looks also so good. Dual-partioning is allready ported, but i have to test ist. There is still enough to port,check, and debug, but until now it looks good. ;)

    When the port for 101a is finished, i will take a look on the 100c fw...  ::)

  • Publish
    Re: S90 Porting Thread
    « Reply #79 on: 11 / April / 2010, 12:14:47 »
    hy,
    i'm new to this and have one question, i tried to get my s90 101c firmware the way described by err99 but the only thing i get after removing the card from the cam is a unformated card. (the af lamp lights and i let the card in for 2 min, batt out, card out, ...)

    anyway hope err99 does god progress in porting 101a (hope it will work also on a cam with 101c)

    cheers

     

    Related Topics