G11 porting - page 11 - DryOS Development - CHDK Forum

G11 porting

  • 530 Replies
  • 249776 Views
Re: G11 porting
« Reply #100 on: 30 / December / 2009, 12:32:08 »
Advertisements
If it helps, I am using this programme : http://www.zeitnitz.de/Christian/scope_en

Re: G11 porting
« Reply #101 on: 30 / December / 2009, 13:22:13 »

If it helps, I am using this programme : http://www.zeitnitz.de/Christian/scope_en
Oh boy, how I love WINE!! Test completed. Status: My hardware works perfectly, signals are strong. Ready to rumble now... :xmas
This evening I got some 100k resistors, just want a confirmation if the simple circuit in reply #21 is the best for dumping in that case.

-kingcang
« Last Edit: 30 / December / 2009, 13:27:37 by kingcang »

Re: G11 porting
« Reply #102 on: 30 / December / 2009, 13:34:21 »
My hardware works perfectly

Are you telling the truth ?  :)

Just so we are both talking about the same thing, are you using the scope programme that I gave you the link for ?

Quote
just want a confirmation if the simple circuit in reply #21 is the best for dumping in that case.

Connect the photo transistor as indicated in reply #21.
Point the TV remote at it.
If necessary, adjust the microphone volume control and/or the scope amplification control.

If you have problems, unsolder one end of the resistor in the jack plug.

If possible, post a screenshot of the scope display.

Re: G11 porting
« Reply #103 on: 30 / December / 2009, 13:44:53 »
« Last Edit: 30 / December / 2009, 14:27:41 by kingcang »

Re: G11 porting
« Reply #104 on: 30 / December / 2009, 17:27:16 »
i assume the above screenshot is from the noise pick-up test and you have not tested the phototransistor yet ?


*

Offline ERR99

  • ****
  • 339
Re: G11 porting
« Reply #105 on: 30 / December / 2009, 17:49:21 »
« Last Edit: 31 / December / 2009, 03:42:22 by ERR99 »

Re: G11 porting
« Reply #106 on: 30 / December / 2009, 17:54:05 »

Re: G11 porting
« Reply #107 on: 30 / December / 2009, 18:02:31 »
« Last Edit: 30 / December / 2009, 18:06:35 by kingcang »

*

Offline reyalp

  • ******
  • 14126
Re: G11 porting
« Reply #108 on: 30 / December / 2009, 18:06:44 »
I took allready a look into the code, to check if the G11 uses a new "dancingbits" code, which prevents the execution of diskboot.bin. But it has the same dancingbits code as one of the previous models { 5,3,6,1,2,7,0,4 }.
Can you test a diskboot encoded with this that just turns on an LED ?

This NEED_ENCODED_DISKBOOT=2 btw, like sx200.
Don't forget what the H stands for.

Re: G11 porting
« Reply #109 on: 30 / December / 2009, 18:11:39 »
Looks like dumping has been done already... Congratulations, ERR99!

That is OK, the effort was not wasted.

Now, at least two people are interested in taking this further.

Incidentally, you could still try pointing the TV remote at the phototransistor to see what happens.

I don't seem to have any phototransistors right now.

 

Related Topics


SimplePortal © 2008-2014, SimplePortal