G11 porting

  • 527 Replies
  • 96807 Views
Re: G11 porting
« Reply #400 on: 03 / March / 2010, 13:14:31 »
Advertisements
By the way... it's easy to read mirrored text.... but reading mirrored numbers is very confusing ;-)


 

i cdnuolt blveiee taht I cluod aulaclty uesdnatnrd waht I was rdanieg. The phaonmneal pweor of the hmuan mnid, aoccdrnig to a rscheearch at Cmabrigde Uinervtisy, it dseno't mtaetr in waht oerdr the ltteres in a wrod are, the olny iproamtnt tihng is taht the frsit and lsat ltteer be in the rghit pclae. The rset can be a taotl mses and you can sitll raed it whotuit a pboerlm. Tihs is bcuseae the huamn mnid deos not raed ervey lteter by istlef, but the wrod as a wlohe. Azanmig huh? Yaeh and I awlyas tghuhot slpeling was ipmorantt!


(thanks to Cybercom)


« Last Edit: 03 / March / 2010, 13:16:50 by Microfunguy »

Re: G11 porting
« Reply #401 on: 03 / March / 2010, 13:22:36 »
Well, that's easy for you to say.

*

Offline KaLi

  • *
  • 21
  • G11 CHDK, FinePix Real 3d W1, 2*A460 SDM, S50, S40
Re: G11 porting
« Reply #402 on: 04 / March / 2010, 04:44:36 »
But try to read that mirrored...  

looks somehow cyrillic to me :D

« Last Edit: 04 / March / 2010, 04:46:34 by KaLi »
any bad photo is much better than any photo not shot...

Re: G11 porting
« Reply #403 on: 10 / March / 2010, 16:30:31 »
Just received my G11 today and made a dump of the 1.00L firmware as I havent seen this anywhere yet :(, I used ERR_99`s modified udumper bin and it seems to have worked fine...

G11_100L.7z - 1.92MB

If the wizzes could take a look that would be fantastic :) thank you

« Last Edit: 10 / March / 2010, 19:11:47 by sam_m »


Re: G11 porting
« Reply #404 on: 12 / March / 2010, 01:17:07 »
Hi everyone,
I've been mucking about with CHDK on an old TX1 and have been so impressed I went out and bought a G11.

its has the 1.00L version of the firmware, anyway im keen to help to get it working.

Heres what i got using the ver.req file.
Code: [Select]
Canon PowerShot G11
P-ID:31DF NT D

Firmware Ver GM1.00L
NoError
Jan 7 2010 13:21:02

Adj Ver.003.009

SubCPU Ver 0.06
Mecha Frim Ver. 3.04

I used the mac installer script to try out the K version.
Turn the camera on and nothing visible happens.
Take the card out, still nothing happens.
Remove the battery and put in back in without the card and the camera boots as normal without chdk. (phew).

maybe i should not have even tried that but I'm still under warranty :)

I've got a Software engineering background but am new to firmware programming.

I've also had a go at compiling CHDK, but I cant compile the ARM GCC toolchain on Snow Leopard. (still working on this)

Anyway, I'm keen to help. Do we need another firmware dump or is the one above enough?

cheers, Marc.


*

Offline fe50

  • ******
  • 3038
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: G11 porting
« Reply #405 on: 12 / March / 2010, 01:42:16 »
Hello & welcome, Marc !

Do we need another firmware dump or is the one above enough?
One dump is enough...

--> http://chdk.wikia.com/wiki/Adding_support_of_a_new_firmware_version

(btw - there are only 2 real G11 development versions, the 100f & the 100j)

Good luck & have fun ;)
« Last Edit: 12 / March / 2010, 02:23:31 by fe50 »

Re: G11 porting
« Reply #406 on: 12 / March / 2010, 02:57:43 »
Awesome, thanks.
Just what i need to get me started.

Re: G11 porting
« Reply #407 on: 12 / March / 2010, 07:06:29 »
Marc, I guess owners with the G11 and 100L firmwares will be coming out of the woodwork more and more now, so hopefully a port will be looked at with the developers on this one soon.

I had the same as you with booting up a different firmware, tried them all, absolutely nothing. Bit scarey as I didnt expect that at first.


Re: G11 porting
« Reply #408 on: 12 / March / 2010, 09:42:37 »
Hello.
I have made some analysis and found custom white balance property case.
Information is stored in Wiki here: http://chdk.wikia.com/wiki/PropertyCase#PropertyCase_NOT_found
Developers with access to camera now needed to verify this property case value.
If value is correct please update wiki (move value to table) or post information here and I will update it myself.
The format of custom WB data is the same as for other cameras: 28bytes of data (7 ints).

*

Offline ERR99

  • ****
  • 339
Re: G11 porting
« Reply #409 on: 12 / March / 2010, 09:46:06 »
Just received my G11 today and made a dump of the 1.00L firmware as I havent seen this anywhere yet :(, I used ERR_99`s modified udumper bin and it seems to have worked fine...

G11_100L.7z - 1.92MB

If the wizzes could take a look that would be fantastic :) thank you
Oh dear, another FW for the G11... Anyway, the fw-dump looks good. A binary compare to the old fw-versiones shows a lot of changes, so it is normal that the current versions of CHDK are not working for 1.00L. I am currently a little bit busy, so i dont know exactly when i will find some free time to start a "blind" port CHDK for the 1.00L fw-version. I still only have the 1.00J FW on my G11,  so i cant test a 1.00L fw port on my camera.

 

Related Topics