G11 porting - page 51 - DryOS Development - CHDK Forum
« previous next »
Pages: 1 ... 46 47 48 49 50 [51] 52 53 54   Go Down

G11 porting

  • 530 Replies
  • 262167 Views
*

Offline reyalp

  • ******
  • 14138
Re: G11 porting
« Reply #500 on: 29 / June / 2010, 17:21:03 »
Advertisements
Quote from: totaltmega on 29 / June / 2010, 16:51:43
which raw format is the best? (most bit per chanel) the CHDK-DNG or G11 own CR2 format ~15mb vs ~10mb. well it must be some lack of bits per chanel in the CR2 files due to size.
CHDK raw (including DNG) use the raw 12 bpp data directly from the sensor.

I would expect the canon raw to use the exact same data, but it could be losslessly compressed in some way. Although the raw buffer on most newer canon P&S are 12 bit, there's generally only ~10 bits of actual precision in the data.
Logged
Don't forget what the H stands for.
*

Offline walqas

  • *
  • 14
override controls
« Reply #501 on: 10 / July / 2010, 11:33:12 »
Question:
How do i control the subject distance override using the wheel or zoom ring?

I used to do that on my Ixus 80. On the G11 i have to go to the override menu and change the value, then preview on half shutter press, then go back the override menu and adjust once more.. etc.

thanks alot.
Logged
*

Offline reyalp

  • ******
  • 14138
Re: G11 porting
« Reply #502 on: 10 / July / 2010, 17:29:33 »
Quote from: walqas on 10 / July / 2010, 11:33:12
Question:
How do i control the subject distance override using the wheel or zoom ring?

I used to do that on my Ixus 80. On the G11 i have to go to the override menu and change the value, then preview on half shutter press, then go back the override menu and adjust once more.. etc.

thanks alot.
Can't you just use camera MF ? Having a shortcut for this is generally a workaround for cameras without native MF.
Logged
Don't forget what the H stands for.
*

Offline fe50

  • ******
  • 3152
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: G11 porting
« Reply #503 on: 11 / July / 2010, 05:33:27 »
Quote from: walqas on 10 / July / 2010, 11:33:12
I used to do that on my Ixus 80.
On the IXUS / SD series you can use SD override for emulating the MF, read about the keys here: http://chdk.wikia.com/wiki/CHDK_firmware_usage/AllBest#New.2FSpecial_Short-cut_Keys
Logged
*

Offline walqas

  • *
  • 14
Re: G11 porting
« Reply #504 on: 12 / July / 2010, 16:19:57 »
Quote from: reyalp on 10 / July / 2010, 17:29:33
Can't you just use camera MF ? Having a shortcut for this is generally a workaround for cameras without native MF.

I guess you are right, but seeing the large SD range that CHDK offered made me think it was better than the MF.
Logged
*

Offline reyalp

  • ******
  • 14138
Re: G11 porting
« Reply #505 on: 13 / July / 2010, 00:19:39 »
Quote from: walqas on 12 / July / 2010, 16:19:57
I guess you are right, but seeing the large SD range that CHDK offered made me think it was better than the MF.
AFAIK it does not extend the limits, those are hardware.
Logged
Don't forget what the H stands for.
*

Offline omarjunior

  • *
  • 3
Re: G11 porting
« Reply #506 on: 15 / July / 2010, 22:06:57 »
Hello friends...

i get the canon G11 and  the Kingston 8gb SDHC card

I was using my canon S5IS CHDK manually but in g11 only boot a card...

but i have problem... cardtricks not accept cards larger than 4gb... and I can not make a bootable disk.

i try use the SDM Installer and make 2 partition

1 FAT 12: 2mb
2 FAT 32: 7597mb

but in windows explore appears only 2mb ... a make bootable disk on cardtricks and camera say "card error"

can someone help me how to use this card?

i buy 2 :(


-

i try manually and appears E31 and power off camera :(
« Last Edit: 15 / July / 2010, 22:12:42 by omarjunior »
Logged
*

Offline fe50

  • ******
  • 3152
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: G11 porting
« Reply #507 on: 16 / July / 2010, 01:31:51 »
Hello & welcome, omarjunior !

Quote from: omarjunior on 15 / July / 2010, 22:06:57
I was using my canon S5IS CHDK manually but in g11 only boot a card...
but in windows explore appears only 2mb ... a make bootable disk on cardtricks and camera say "card error"
The G11 CHDK DOES NOT support the manual loading method through the firmware update mechanism !
Using a multi partitioned card (prepared with the SDM Installer) should work...

For the "Windows issue" read more here:
* http://chdk.setepontos.com/index.php/topic,2468.msg30911.html#msg30911
* http://chdk.setepontos.com/index.php/topic,3910.msg36763.html#msg36763
Logged
*

Offline omarjunior

  • *
  • 3
Re: G11 porting
« Reply #508 on: 19 / July / 2010, 19:31:25 »
i try this method

http://mind-fields-ahead.blogspot.com/2008/04/canon-s5-is-chdk-hack-step-by-step.html

and work...

but for copy images from SD card ... is very very slow... its normal?
Logged
*

Offline Edgar83

  • *
  • 1
Re: G11 porting
« Reply #509 on: 26 / July / 2010, 09:54:49 »
Hi to everybody, first of all excuse me if I make some error, but english is not my native language.

I have a question or maybe a request about chdk on G11

I noticed that in "low light mode" the burst speed is extremely faster than in the other modes. It would be very nice to have the possibility to shoot high speed burst, even @ 2,5 Megapixels. The problem at the stock setting is that (it's normal since it's a low-light mode) it boost the iso at a very high setting, ruining the already relatively low definition (2,5 MP) images with a lot of noise, also disabling raw mode.

Could it be possible to control iso, or force it to the lowest possible setting, maybe enable raw output and have some sort of control of the exposition instead of full auto?

In my opinion, one of the major lacks of this camera is the slow burst speed, having the possibility to shot at a decent burst rate, even if at a lower resolution, could be usefull in some circumstances

Thank you

Angelo
Logged
Pages: 1 ... 46 47 48 49 50 [51] 52 53 54   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal