CHDK Control of the Mode Dial for A570IS

ewavr

1057
A710IS

Re: CHDK Control of the Mode Dial for A570IS

« Reply #70 on: 08 / December / 2008, 19:10:54 »

Advertisements

« Last Edit: 09 / December / 2008, 12:48:03 by ewavr »

Logged

mattkime

Re: CHDK Control of the Mode Dial for A570IS

« Reply #71 on: 11 / December / 2008, 23:45:53 »

I'm attempting figure out how to add support for my a650. I'm particularly interested switching to playback mode so i can delete images. i'm doing the property case dump but i'm not seeing a corresponding change in the 0 to 279 range.

set_prop(227,1)

in lua fails to put the camera into Tv mode although it does seem to correspond to 1 when i dump the properties.

any advice on moving forward?

Logged

zeno

Re: CHDK Control of the Mode Dial for A570IS

« Reply #72 on: 06 / February / 2009, 10:37:12 »

Although nothing has been done about the ticket I submitted (see http://chdk.kernreaktor.org/mantis/view.php?id=118), I have now produced versions based on build 701 for the A560, A570, A720 and G9 - see here:
http://www.zenonic.demon.co.uk/kapstuff/zchdk.html

I have a part-working version for the Ixus70/SD1000 too. I say part-working because for that camera all I can do is switch between Movie Mode and whatever still mode the camera is set to. This is because switching between still modes (Auto and M for example) on the Ixus is done via a Canon menu, not by sliding a switch. None of the 3 physw_status fields change when switching modes in this way. And although properties 49 and 50 do change, setting them via a script has no effect either.

Does anyone have any suggestions for how to switch between Auto and M modes in a script on cameras such as the Ixus70?

Logged

A570, S100, Ixus 127
Author of ASSIST, STICK, WASP, ACID, SDMInst, LICKS, WICKS, MacBoot, UBDB, CFGEdit

fe50

3139
IXUS50 & 860, SX10 Star WARs-Star RAWs

Re: CHDK Control of the Mode Dial for A570IS

« Reply #73 on: 07 / February / 2009, 08:56:23 »

Quote from: zeno on 06 / February / 2009, 10:37:12

Does anyone have any suggestions for how to switch between Auto and M modes in a script on cameras such as the Ixus70?

Why not just emulate the needed keypresses with click/press ?

Logged

-->FIRMWARE DUMPS<-- * Manual * Lua * me

crasspm

Re: CHDK Control of the Mode Dial for A570IS

« Reply #74 on: 04 / June / 2009, 17:06:49 »

Quote from: zeno on 06 / February / 2009, 10:37:12

Although nothing has been done about the ticket I submitted (see http://chdk.kernreaktor.org/mantis/view.php?id=118), I have now produced versions based on build 701 for the A560, A570, A720 and G9 - see here:
http://www.zenonic.demon.co.uk/kapstuff/zchdk.html

I have a part-working version for the Ixus70/SD1000 too. I say part-working because for that camera all I can do is switch between Movie Mode and whatever still mode the camera is set to. This is because switching between still modes (Auto and M for example) on the Ixus is done via a Canon menu, not by sliding a switch. None of the 3 physw_status fields change when switching modes in this way. And although properties 49 and 50 do change, setting them via a script has no effect either.

Does anyone have any suggestions for how to switch between Auto and M modes in a script on cameras such as the Ixus70?

Do you have your sd1000 version available somewhere for download?

Logged