You probably want to start here : http://chdk.wikia.com/wiki/Prepare_your_SD_card
To avoid confusion: STICK can't install unofficial zip releases, so a different utility will be needed.
I understand that, too. I've tried different utilities such as EOScard and the likes, but the camera doesn't seem to want to pick up the 'BOOTDISK' string... I've verified that the card's FAT32 and that the string is at the correct address on the card (and it's locked), but nada. Maybe the camera's running a newer version of 100a?
You probably missed the part in the link I posted about needing to know when the camera was released. The SD1400 was released in Feb 2010 and thus will not boot from a FAT32 partition. You need to follow the instructions for booting from a FAT16 partition and if your SD card is larger than 4G you will need to use the dual partition scheme.
Aaahhh... yes, really sorry. I did miss that part! I'll give the dual partition thing a shot when I get home and let you know of the results. Thanks again... *facepalms*
I have not had any luck with shutter speeds yet but I think it's more me than the code?
I have not had any success with the default script working. It prints out: "Started:)Finished" without allowing me to do anything.
I loaded more scripts on the card and ran the following,MD_SDM.BAS (Fast MD 000914) =uBASIC: 71 parse error *** TERMINATED ***SHUTTE.BAS (Shutter speed) =uBASIC: 7 parse err *** TERMINATED ***TIME_L.BAS (Time-lapse) =uBASIC: 44 Parse err *** TERMINATED ***TLAPSE.BAS (Time-lapse) =uBASIC: 44 Parse err *** TERMINATED ***SUNSET~1.LUA (Sunset F16) =:86: attempt to call field 'deleteUntilMbFree100CANON' (a nil value)All these scripts work in my other cameras so I'm not sure whats going onwith the errors?
Started by HarpoMa
« 1 2 ... 67 68 »
General Discussion and Assistance
Started by AerialPhotos
General Help and Assistance on using CHDK stable releases
Started by Eqric
Started by waterwingz
Started by wb0urw