PowerShot SX210 IS - Porting Thread - page 59 - General Discussion and Assistance - CHDK Forum

PowerShot SX210 IS - Porting Thread

  • 589 Replies
  • 320182 Views
Re: PowerShot SX210 IS - Porting Thread
« Reply #580 on: 12 / February / 2014, 21:14:55 »
Advertisements
I'm using: trunk-3349.zip

CHDK Settings->OSD Settings->Miscellaneous Values->Show Misc Values [Shoot]
Show Zoom [.]
Zoom Value [EFL]

 when  half press (camera_info.state.is_shutter_half_press) but it doesn't work. Why?

@philmoz
  This is a bug in trunk-3349, gui_osd.c in 371:"conf.show_values==SHOW_HALF"  changed to "conf.show_values==2". SHOW_HALF==3!=Miscellaneous Values->Show Misc Values [Shoot].
Show Misc Values [ ]={ "Don't", "Always", "Shoot"}={0,1,2}

Thanks for the report, it should be fixed in revision 3357.

Phil.
Thx. philmoz.
     It's work very good in trunk-3357.

Re: PowerShot SX210 IS - Porting Thread
« Reply #581 on: 28 / June / 2014, 17:04:26 »
Has anyone gotten partition swapping working for this model?  I picked it up hoping to replace my SD1200 for timelapse, got a 32 GB card for it, but I have to manually boot CHDK everytime.  If I use 'stick' to configure the card, it works for autobooting, but will not swap partitions.  The 'swap partitions' menu option does not work, either. 

SD4000, 100d, on an Apple macbook pro, 10.9, and CHDK 1.2 and 1.3.


Re: PowerShot SX210 IS - Porting Thread
« Reply #582 on: 28 / June / 2014, 17:23:37 »
Has anyone gotten partition swapping working for this model?  I picked it up hoping to replace my SD1200 for timelapse, got a 32 GB card for it, but I have to manually boot CHDK everytime.  If I use 'stick' to configure the card, it works for autobooting, but will not swap partitions.  The 'swap partitions' menu option does not work, either. 
The SX210 was released in early 2010 and thus needs dual partition support for cards greater than 4G if you wish to autoboot CHDK.   I checked the source code and the dual partition support code is in boot.c and the CAM_MULTIPART #define is in platform_camera.h.    All of which means it should work.

However, its appears that others have had problems too : http://chdk.setepontos.com/index.php?topic=5045.msg98128#msg98128
Quote
SD4000, 100d, on an Apple macbook pro, 10.9, and CHDK 1.2 and 1.3.
Why are you also mentioning the SD4000 here ?  ( which also needs dual partitions BTW).
« Last Edit: 28 / June / 2014, 17:27:56 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16

Re: PowerShot SX210 IS - Porting Thread
« Reply #583 on: 29 / June / 2014, 16:00:45 »
I may have posted to the wrong thread - I was searching on 'sd4000 swap partitions' and landed here.  I also tend to keep 6-7 tabs open to the forum while I'm following a train of thought, so I might've jumped the rails.  I'll see if I can cross-post. 

I also have the exact same issue on my SD1200, so maybe it's a more general issue?  (pre-2011 cameras and >4GB cards?)  My S95 works fine, though...


Re: PowerShot SX210 IS - Porting Thread
« Reply #584 on: 29 / June / 2014, 16:37:19 »
I may have posted to the wrong thread - I was searching on 'sd4000 swap partitions' and landed here.
So you want to know about the SD4000 then ?

According to the code,  it has dual partition support compiled in and enabled.

Quote
I'll see if I can cross-post. 
No need.

Quote
I also have the exact same issue on my SD1200, so maybe it's a more general issue?  (pre-2011 cameras and >4GB cards?)  My S95 works fine, though...
Lots of pre-2011 cameras work fine with dual partitions - including four of mine.

Update :  let's talk about this :

Quote
If I use 'stick' to configure the card, it works for autobooting, but will not swap partitions.  The 'swap partitions' menu option does not work, either.
If there is a "Swap Partitions" menu option, then the code is built-in to do that.  Later cameras do not have that option.  If you configure with STICK,  how many images does the camera think it can store ?  If it's using dual partitions and not swapping then it will only be a few.    Also,  did you try this : WASP on your PC to swap paritions ?
« Last Edit: 29 / June / 2014, 16:50:53 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16

Re: PowerShot SX210 IS - Porting Thread
« Reply #585 on: 24 / July / 2014, 22:47:03 »
What is the latest stable release CHDK for this camera?

Re: PowerShot SX210 IS - Porting Thread
« Reply #586 on: 25 / July / 2014, 00:30:45 »
What is the latest stable release CHDK for this camera?
Stable :  http://mighty-hoernsche.de/

Dev / current version : http://mighty-hoernsche.de/trunk/

I'd strongly recommend the second one as the dev version is about to become the stable version shortly.
Ported :   A1200    SD940   G10    Powershot N    G16

Re: PowerShot SX210 IS - Porting Thread
« Reply #587 on: 29 / October / 2015, 13:19:11 »
Hi guys, thanks for all the great work! Any progress?
The wiki http://chdk.wikia.com/wiki/SX210IS says the latest release is 1.00C

*

Offline srsa_4c

  • ******
  • 4451
Re: PowerShot SX210 IS - Porting Thread
« Reply #588 on: 29 / October / 2015, 14:13:52 »
Hi guys, thanks for all the great work! Any progress?
The wiki http://chdk.wikia.com/wiki/SX210IS says the latest release is 1.00C
What you're looking for is this: http://chdk.wikia.com/wiki/Releases and perhaps this: http://chdk.wikia.com/wiki/Downloads
1.00c is the factory firmware version of the camera, we can't change that.

*

Offline Caefix

  • *****
  • 948
  • Sorry, busy deleting test shots...
Re: PowerShot SX210 IS - Porting Thread
« Reply #589 on: 03 / July / 2020, 15:28:34 »
 :blink: Broken colors, too. As close as possible manually picked solution attached.
All lifetime is a loan from eternity.

 

Related Topics


SimplePortal © 2008-2014, SimplePortal