supplierdeeply

PowerShot SX210 IS - Porting Thread

  • 588 Replies
  • 136600 Views
  • Publish
    Re: PowerShot SX210 IS - Porting Thread
    « Reply #450 on: 29 / March / 2011, 03:16:24 »
    Advertisements
    Hi,

    SkyWalker9 has compiled a nice -illustrated - tutorial on using large cards with CHDK.
    You can download it here

    hope that helps,

    wim


    thanks this guide helped me setup my 16gb sdcard with CHDK quick and easy

  • Publish
    Re: PowerShot SX210 IS - Porting Thread
    « Reply #451 on: 29 / March / 2011, 07:08:19 »
    Hi, I tried to compile last sources:   sx210-ixus1000asm1989trunk1070_2

    It ends with error:


    >> Entering to lib/armutil
    reversebytes.S -> reversebytes.o
    callfunc.S -> callfunc.o
    reboot.c -> reboot.o
    In file included from ../../include/platform.h:41,
                     from reboot.c:1:
    ../../include/propset3.h:106:3: error: #error camera type not defined
    make[2]: *** [reboot.o] Error 1

    I wonder what went wrong. ( I have PLATFORM=sx210is and PLATFORMSUB=100c in makefile.inc )
    cheers


  • Publish
    Re: PowerShot SX210 IS - Porting Thread
    « Reply #452 on: 29 / March / 2011, 07:21:42 »
    Sorry, i'm blind.
    makefile.inc has many PLATFORM,PLATFORMSUB uncommented. One has to comment them all.

    *

    Offline reyalp

    • ******
    • 9810
  • Publish
    Re: PowerShot SX210 IS - Porting Thread
    « Reply #453 on: 29 / March / 2011, 12:43:57 »
    Sorry, i'm blind.
    makefile.inc has many PLATFORM,PLATFORMSUB uncommented. One has to comment them all.
    This is not true, what you set on the command line overrides what is in the file.

    You can also use buildconf.inc or localbuildconf.inc for your personal settings, these override what is in the default makefile.inc.
    Don't forget what the H stands for.


    *

    Offline asm1989

    • *****
    • 527
    • SX720, SX260, SX210 & SX200
  • Publish
    Re: PowerShot SX210 IS - Porting Thread
    « Reply #454 on: 13 / April / 2011, 12:42:52 »
    @v3as4k
    use the full source code provided, don't mix it with existing trunks.

  • Publish
    Re: PowerShot SX210 IS - Porting Thread
    « Reply #455 on: 18 / April / 2011, 16:27:44 »
    I tried version 1.7 and it doesn't work for me.

    I do the firmware update, get the boot splash screen of the camera for 1-2 seconds then there's a crack sound as if the shutter closes (that is not normally heard during boot without the firmware) and the camera goes blank.

    With version 1.6 it boots and loads fine.

    Is there anything I can do to help debug?

    *

    Offline asm1989

    • *****
    • 527
    • SX720, SX260, SX210 & SX200
  • Publish
    Re: PowerShot SX210 IS - Porting Thread
    « Reply #456 on: 24 / April / 2011, 10:55:40 »
    New Version 1.8

    http://www.4shared.com/file/vUCx4XTv/CHDK1154-sx210is-ASM1989-RCv18.html
    compiled with latest trunk 1154, dont know if fixes or crashes anything, but seam to work

    Full Source here with ixus1000too:
    http://www.4shared.com/file/fwfRXVYZ/sx210-ixus1000asm1989trunk1154.html

  • Publish
    Re: PowerShot SX210 IS - Porting Thread
    « Reply #457 on: 28 / April / 2011, 13:11:10 »
    New Version 1.8

    http://www.4shared.com/file/vUCx4XTv/CHDK1154-sx210is-ASM1989-RCv18.html
    compiled with latest trunk 1154, dont know if fixes or crashes anything, but seam to work

    Full Source here with ixus1000too:
    http://www.4shared.com/file/fwfRXVYZ/sx210-ixus1000asm1989trunk1154.html


    I tried this however after enabling both DNG/RAW it still only outputs JPG :(


  • Publish
    Re: PowerShot SX210 IS - Porting Thread
    « Reply #458 on: 28 / April / 2011, 23:14:21 »
    New Version 1.8

    http://www.4shared.com/file/vUCx4XTv/CHDK1154-sx210is-ASM1989-RCv18.html
    compiled with latest trunk 1154, dont know if fixes or crashes anything, but seam to work

    Full Source here with ixus1000too:
    http://www.4shared.com/file/fwfRXVYZ/sx210-ixus1000asm1989trunk1154.html


    I tried this however after enabling both DNG/RAW it still only outputs JPG :(

    nevermind, user error: its just that it doesn't display the file when connecting the computer directly to the camera since it stores to a separate folder.  Awesome work btw on this port, looking forward to playing around with it!

  • Publish
    Re: PowerShot SX210 IS - Porting Thread
    « Reply #459 on: 29 / April / 2011, 11:33:48 »
    @asm1989
    Thank your New Version 1.8 ,you Source  sx210-ixus1000asm1989trunk1154 has a bugs: \platform\sx210is\main.c the 44th  line "{ 125,  60000}," fixes =>"{ 125,  70000},"

     

    Related Topics