Ramote Control and USB - DryOS Development - CHDK Forum
« previous next »
Pages: [1]   Go Down

Ramote Control and USB

  • 7 Replies
  • 5169 Views
*

Offline alvm

  • ***
  • 123
Ramote Control and USB
« on: 27 / February / 2013, 13:47:30 »
Advertisements
Hi,

I see in kbd.c that for remote control chdk clear USB bit (for a800 for example) so a cam always think that USB cable is not connected. But how does USB part of canon f/w  work in this case?

Thanks,
Alex.
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Ramote Control and USB
« Reply #1 on: 27 / February / 2013, 14:38:03 »
Quote from: alvm on 27 / February / 2013, 13:47:30
I see in kbd.c that for remote control chdk clear USB bit (for a800 for example) so a cam always think that USB cable is not connected. But how does USB part of canon f/w  work in this case?
It only does that in <ALT> mode.  When that happens, Canon USB firmware is essentially disabled.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline alvm

  • ***
  • 123
Re: Ramote Control and USB
« Reply #2 on: 27 / February / 2013, 14:47:00 »
Quote from: waterwingz on 27 / February / 2013, 14:38:03
It only does that in <ALT> mode.  When that happens, Canon USB firmware is essentially disabled.

Yes, but how does work Remote Control (as I understand it uses USB) and ptp client?
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Ramote Control and USB
« Reply #3 on: 27 / February / 2013, 15:02:59 »
Quote from: alvm on 27 / February / 2013, 14:47:00
Yes, but how does work Remote Control (as I understand it uses USB) and ptp client?
I guess the question is what do you mean by "remote control"?

The USB bit you are seeing in kbd.c is used to determine if there is +5V present on the USB power pin.   CHDK uses the presence or absence of that voltage as a "remote" signal to indicate something should happen  (like take a photograph).

PTP functionality is accomplished by communications over the two data lines on the USB conneector.

The two "remote controls" are completely different things.


Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline alvm

  • ***
  • 123
Re: Ramote Control and USB
« Reply #4 on: 27 / February / 2013, 15:15:17 »
I mean remote control using USB transport like ptp client but as I inderstood from your words chdk's remote control uses USB power line for control. So when USB bit is cleared by chdk USB doesn't work and ptp can't be used, right?
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Ramote Control and USB
« Reply #5 on: 27 / February / 2013, 15:30:15 »
Quote from: alvm on 27 / February / 2013, 15:15:17
So when USB bit is cleared by chdk USB doesn't work and ptp can't be used, right?
No.   PTP works fine unless you enable USB Remote in the CHDK menus.

http://chdk.wikia.com/wiki/USB_Remote#Enabling_USB_Remote_operation

Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline alvm

  • ***
  • 123
Re: Ramote Control and USB
« Reply #6 on: 27 / February / 2013, 15:36:35 »
Quote from: waterwingz on 27 / February / 2013, 15:30:15
No.   PTP works fine unless you enable USB Remote in the CHDK menus.

http://chdk.wikia.com/wiki/USB_Remote#Enabling_USB_Remote_operation



Thanks, Waterwingz!
Logged
*

Offline LILIAKU

  • *
  • 6
Re: Ramote Control and USB
« Reply #7 on: 18 / July / 2013, 17:53:26 »
Whoops, wrong thread...
« Last Edit: 18 / July / 2013, 18:03:38 by LILIAKU »
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal