Can you get bulb in Canon G10? - General Discussion and Assistance - CHDK Forum supplierdeeply

Can you get bulb in Canon G10?

  • 8 Replies
  • 6141 Views
Can you get bulb in Canon G10?
« on: 12 / May / 2010, 17:19:00 »
Advertisements
I'm new here. And think it looks exciting with the firmware

Can you get Blub in Canon G10?

If you can not then I would like to have a firmware with 64 seconds.

I have looked at CHDK pages of many hours. But I can not figure out how I lie now firmware into the Canon G10. And what firmware you have to download.

It's probably because I'm not so good at English

So if you want to be friendly and to link to the firmware I need, and link to how I located it in the Canon G10.

Can we go back to Canon original firmware?


Best Regards

Mickydk from Denmark
« Last Edit: 13 / May / 2010, 14:27:55 by Mickydk »

*

Offline an0n

  • ***
  • 152
Re: Can you get Blub in Canon G10?
« Reply #1 on: 12 / May / 2010, 22:26:08 »
Welcome Mickydk,

Sorry, CHDK is not available for the G10 yet, some details are at:- http://chdk.wikia.com/wiki/G10
A720IS.

Re: Can you get Blub in Canon G10?
« Reply #2 on: 13 / May / 2010, 07:03:28 »
I'm probably just stupid. But it says something about Available firmware dumps on the page you link to. Is not that some are made and you may fall into the G10?

Best Regards

Mickydk from Denmark

Re: Can you get Blub in Canon G10?
« Reply #3 on: 13 / May / 2010, 07:14:11 »
I'm probably just stupid. But it says something about Available firmware dumps on the page you link to. Is not that some are made and you may fall into the G10?

A firmware dump is the start of the CHDK porting process. People dump the firmware from their camera to an SD card and post it on the net. This firmware is then analyzed by some CHDK experts, which allows them to make a version of CHDK that runs on that particular camera (with that particular firmware).

However, this analysis and CHDK adapting is a complicated process and only works well if one of the CHDK developers actually has this camera to work with. For the G10, some people are working on it, but they are not finished yet.


Re: Can you get Blub in Canon G10?
« Reply #4 on: 13 / May / 2010, 10:29:06 »
Many thanks.
I hope a someone who can do Blub in Canon G10.
Can you recommend a particular thread to follow?
Or should I ask a place if there is one who can create Blub for me?

Re: Can you get Blub in Canon G10?
« Reply #5 on: 13 / May / 2010, 12:22:19 »
Many thanks.
I hope a someone who can do Blub in Canon G10.
Can you recommend a particular thread to follow?
Or should I ask a place if there is one who can create Blub for me?
This thread deals with the G10 porting process:
http://chdk.setepontos.com/index.php/topic,3661.0.html
Although it is deemed impolite to ask when a certain port will be finished. It just depends how much time the porters have and how experienced they are.

And by the way, I guess you mean bulb mode instead of blub? Blub sounds more like an underwater-mode.

Re: Can you get Blub in Canon G10?
« Reply #6 on: 13 / May / 2010, 12:39:41 »
Thanks I try and follow it.
I just want to hear there are some who think and do that?
Blub = you can take pictures of more than 60 seconds. You can create images up to 99 hour

Re: Can you get Blub in Canon G10?
« Reply #7 on: 13 / May / 2010, 14:02:17 »
Blub = you can take pictures of more than 60 seconds. You can create images up to 99 hour

That is bulb mode, not blub mode. See Wikipedia.


Re: Can you get Blub in Canon G10?
« Reply #8 on: 13 / May / 2010, 14:27:10 »
Sorry. It was a clerical error from  me :-(

 

Related Topics