Is there any progress on the "no motion" option?
. . . and any advice for someone wanting to start the trial and error process with an A570IS.
Nope. I could never get it to work and I got fed-up with asking the "developer" for any further information on the issue. Trying to get any clues at all is like pulling teeth. I don't bother to deal with people who think their arcane and obscure hints qualify as any form of "help". I have more important things to do than pumping-sunshine up their @ss just to get them to reveal how to use their routines.If you want any assistance on any of the uBASIC commands from now on, I suggest you direct your questions directly to the developer who created them. I'm not going to be their translator anymore.
you can use dirty workaround set triggerdelay, timeout, thresholdand check if t<1thats will be no motion during specified timeoutof course there will be dead time periods ( due to trigger delay ) ie if you chose timeout 2 seconds and 1 second trigger delay and something constantrly moves on the scene you will lost 50% of time on preparation
Started by bitts
Started by ChrisN
Started by Gixxerk4600
General Help and Assistance on using CHDK stable releases
Started by waterwingz
« 1 2 ... 11 12 »
Started by Brookeville
General Discussion and Assistance