Using a computer mouse with multi-buttons to access camera commands ?

colinbm

230
Canons S2IS Infrared, S5IS, A570 pair, SIGMA DP2

« on: 21 / May / 2010, 06:49:01 »

Advertisements

Thanks you to all the developers of CHDK.
I have just found this group CHDK in the last couple of days & I am very enthusiastic to get started.
I have S2IS f/ware 100g & S5IS f/ware 101b.
I had a lot of trouble finding the Firmware number, but thanks to "ACID" it was a dream once I found you.
I am now making a mini-usb remote shutter release.
Has anyone gone down the path of using a multi-button mouse to operate the camera ? Such as 1/2 press auto-focus, shutter release, zoom in & out, manual focus & macro etc ?

Cheers
Col

Logged

PhyrePhoX

2254
make RAW not WAR

Re: Using a computer mouse with multi-buttons to access camera commands ?

« Reply #1 on: 21 / May / 2010, 07:50:20 »

i dont know how a mouse works in detail, but you have at least these obstacles: where to get power for the mouse? and how to translate the clicks of the mouse into commands ("bursts of power" if you will) CHDK can understand?

Logged

Flickr*
www.PhyreWorX.de
CHDK News @ Twitter

colinbm

230
Canons S2IS Infrared, S5IS, A570 pair, SIGMA DP2

Re: Using a computer mouse with multi-buttons to access camera commands ?

« Reply #2 on: 21 / May / 2010, 08:32:45 »

Thanks PhyrePhoX
The power would be 3 X 1.5 volt button cells inside the mouse, DIY fashioned.
This is how the mini-usb remote is powered.
How to translate the clicks of the mouse into commands, is what I don't know ?
A usb mouse only has 4 wires too, so it has to understand these "bursts of power" & convert them into comands somewhere ?
Cheers
Col

Logged

PhyrePhoX

2254
make RAW not WAR

Re: Using a computer mouse with multi-buttons to access camera commands ?

« Reply #3 on: 21 / May / 2010, 09:07:53 »

well, a usb mouse has the usb protocol, it "speaks" with the pc via a driver. the usb protocol is something we cannot control via chdk.

Logged

Flickr*
www.PhyreWorX.de
CHDK News @ Twitter

colinbm

230
Canons S2IS Infrared, S5IS, A570 pair, SIGMA DP2

Re: Using a computer mouse with multi-buttons to access camera commands ?

« Reply #4 on: 21 / May / 2010, 09:17:57 »

Thanks PhyrePhoX
OK I was hoping, dreaming !
So, using these remote shutter releases, you need to half-press on camera for auto-focus, then use the remote to release the shutter.
Cheers
Col

Logged

thepanoguy

Re: Using a computer mouse with multi-buttons to access camera commands ?

« Reply #5 on: 21 / May / 2010, 09:41:23 »

The PS/2 Mouse/Keyboard Protocol:

http://www.computer-engineering.org/ps2protocol/

Mouse parts scavenging and applications:

http://hackaday.com/2008/05/16/how-to-scavenge-a-mouse-for-parts/

PS2 mouse to micro-controller:

http://www.arduino.cc/playground/ComponentLib/Ps2mouse

Logged

colinbm

230
Canons S2IS Infrared, S5IS, A570 pair, SIGMA DP2

Re: Using a computer mouse with multi-buttons to access camera commands ?

« Reply #6 on: 21 / May / 2010, 10:27:11 »

Thanks thepanoguy
I started this morning to make a remote shutter release & needed a momentary switch, which I knew the mouse has a few inside. But I didn't want to wreck a mouse for one switch, but it got me wondering about using a mouse on the camera with a mini-usb plug.
I have now got a very limited understanding of the workings of a mouse.
PS/2 & USB mice both only have 4 wires !
Power 5v & ground, data & clock. This is very high tech for me, but I can see something.
So the data & clock gives the code for each button.
I just have to hope this is translateable to CHDK ?? Please.
Cheers
Col

Logged

colinbm

230
Canons S2IS Infrared, S5IS, A570 pair, SIGMA DP2

Re: Using a computer mouse with multi-buttons to access camera commands ?

« Reply #7 on: 21 / May / 2010, 10:41:28 »

Just to expand on this, if it is ever possible. A wireless mouse with the receiver plugged into the camera with a mini-usb-dongle, we would be unfetted from our cameras for the shot at least !
Cheers
Col

Logged