Video Manual Control: ISO, APERTURE & SHUTTER SPEED CONTROL, PLEASE!!!!

uzilevi

2

sx40 canon full manual video controll can it be made?

« Reply #70 on: 25 / November / 2013, 03:32:23 »

Advertisements

hi can any one make the canon sx40 to record video on full manual control ?
when i go to manual mode and take a pic i see very good pic but as soon that i record the video the camera go's to automatic control and its bad ,the pic jast is not good.
can some one make a script for it or is it not possible to do it.
do i need a different camera
thanks

Logged

waterwingz

12138

Re: sx40 canon full manual video controll can it be made?

« Reply #71 on: 25 / November / 2013, 08:31:48 »

Manual exposure control in video mode is not currently available with CHDK. It might be technically possible and people have probably experimented with the idea, but its not supported.

Logged

Ported : A1200 SD940 G10 Powershot N G16

uzilevi

2

Re: sx40 canon full manual video controll can it be made?

« Reply #72 on: 25 / November / 2013, 17:17:09 »

hi waterwingz
can you explain more on it ? i saw a post on canon a series can't remember the no,but they say hear that you can record manualy on it with the chdk and can select iso Shutter ...
so if you can explain on what may be the problem,i knew a lot will like it if it can be made full manual
thanks uzi

Logged

srsa_4c

4451

Re: sx40 canon full manual video controll can it be made?

« Reply #73 on: 25 / November / 2013, 17:29:35 »

Quote from: uzilevi on 25 / November / 2013, 03:32:23

hi can any one make the canon sx40 to record video on full manual control ?

I don't know whether it's working on your camera, but there is this script:

http://chdk.setepontos.com/index.php?topic=5295.msg68622#msg68622

Don't expect too much reliability, it can crash the camera easily.

Logged

waterwingz

12138

Re: sx40 canon full manual video controll can it be made?

« Reply #74 on: 25 / November / 2013, 17:56:51 »

Quote from: srsa_4c on 25 / November / 2013, 17:29:35

Quote from: uzilevi on 25 / November / 2013, 03:32:23
hi can any one make the canon sx40 to record video on full manual control ?
I don't know whether it's working on your camera, but there is this script:

http://chdk.setepontos.com/index.php?topic=5295.msg68622#msg68622

Don't expect too much reliability, it can crash the camera easily.

This actually runs pretty well on my A1200 & G10 - once I change lines 256/257 to adjust for not having a video button. With a little cleanup of the GUI (using Lua drawing maybe) and some additional code to allow the zoom to operate, this could be quite useful. Especially now that we can enable native calls without a special build.

« Last Edit: 25 / November / 2013, 18:12:27 by waterwingz »

Logged

Ported : A1200 SD940 G10 Powershot N G16

reyalp

14079

Re: Video Manual Control: ISO, APERTURE & SHUTTER SPEED CONTROL, PLEASE!!!!

« Reply #75 on: 25 / November / 2013, 22:51:23 »

By request, merged sx40 discussion into this thread.

Logged

Don't forget what the H stands for.

waterwingz

12138

Re: Video Manual Control: ISO, APERTURE & SHUTTER SPEED CONTROL, PLEASE!!!!

« Reply #76 on: 26 / November / 2013, 14:23:25 »

I took a few minutes to play with fudgey's script and convert the GUI (attached below). Works with cameras that have a video button (if they are in video mode) and with cameras without a seperate video button. It also adds the ability to use the zoom while the script is running.

It runs well on my G10, A1200 and SD940. As a bonus, on the A1200 & SD940, adjusting the aperture engages the ND filter as those cameras do not have an adjustable aperture. (Note: that if you run the script while not in video mode, the exposure adjusts but the ND filter does not engage when Av is adjusted).

Sadly, with the same script loaded on my SX50 it does not want to stay in AELock - resetting the exposure a few seconds after I adjust it manually. The SX50 also locked up when I ran the ISO up to 3200. I did not see either of these issues with my other cameras so YMMV.

Update : The initialization of the Tv, Av, & Sv values is still not quite correct. To be safe, I think that you need to adjust them each up & down prior to starting recording.

videxp.lua (10.09 kB - downloaded 30 times.)

« Last Edit: 26 / November / 2013, 15:36:42 by waterwingz »

Logged

Ported : A1200 SD940 G10 Powershot N G16

srsa_4c

4451

Re: Video Manual Control: ISO, APERTURE & SHUTTER SPEED CONTROL, PLEASE!!!!

« Reply #77 on: 26 / November / 2013, 14:51:11 »

Quote from: waterwingz on 26 / November / 2013, 14:23:25

Sadly, with the same script loaded on my SX50 it does not want to stay in AELock - resetting the exposure a few seconds after I adjust it manually.

Does it make a difference if you lock AE using the Canon UI before recording?

Logged

waterwingz

12138

Re: Video Manual Control: ISO, APERTURE & SHUTTER SPEED CONTROL, PLEASE!!!!

« Reply #78 on: 26 / November / 2013, 15:28:48 »

Quote from: srsa_4c on 26 / November / 2013, 14:51:11

Does it make a difference if you lock AE using the Canon UI before recording?

Not sure that Canon AE lock is an option in video mode - nothing about it in the manual and I can't seem to convince it otherwise.

Using a half press and the UP button on the mode dial engages AEL for the next still shot. Activating video recording in that mode seems to just reset it.

« Last Edit: 26 / November / 2013, 15:35:11 by waterwingz »

Logged

Ported : A1200 SD940 G10 Powershot N G16

srsa_4c

4451

Re: Video Manual Control: ISO, APERTURE & SHUTTER SPEED CONTROL, PLEASE!!!!

« Reply #79 on: 26 / November / 2013, 15:47:42 »

Quote from: waterwingz on 26 / November / 2013, 15:28:48

Using a half press and the UP button on the mode dial engages AEL for the next still shot. Activating video recording in that mode seems to just reset it.

It should be available in movie mode (mode dial explicitly set to movie mode), but they don't call this AE lock, see manual page 110.

Logged