SD 4000 IS / IXUS 300 HS / IXY 30S porting thread - page 27 - DryOS Development - CHDK Forum

SD 4000 IS / IXUS 300 HS / IXY 30S porting thread

  • 322 Replies
  • 193883 Views
Re: SD 4000 IS / IXUS 300 HS / IXY 30S porting thread
« Reply #260 on: 22 / March / 2011, 13:43:23 »
Advertisements
please take a look at this aerial panorama. It was captured last summer using SX200IS.


Good image !

Was that taken from a kite or an aircraft ?

Was it raw and at wide-angle setting ?

Which stitching software did you use ?

Was the stitching fully automatic or was some manual tweaking required ?


David

*

Offline Yury

  • *
  • 15
  • IXUS 300HS 1.00D, IXUS 980IS 1.01B
Re: SD 4000 IS / IXUS 300 HS / IXY 30S porting thread
« Reply #261 on: 29 / March / 2011, 10:20:09 »
Is it possible to override mechanical shutter and remain only electronic shutter? Maybe quality will be some lower, but resource of the camera will be higher and maybe countinuous mode will be some faster.

Re: SD 4000 IS / IXUS 300 HS / IXY 30S porting thread
« Reply #262 on: 02 / May / 2011, 11:04:24 »
Hi, there,

Sorry for this being my first post, but is development on CHDK for SD4000 still continuing?

If not, could I be directed to instructions on how to install the current beta for the SD4000?  I've searched for instructions, but could not find any.

Thanks for any help, and I hope a release version will be available soon!   :D

*

Offline Yury

  • *
  • 15
  • IXUS 300HS 1.00D, IXUS 980IS 1.01B

*

Offline pixeldoc2000

  • ****
  • 356
  • IXUS900Ti 1.00C, IXUS300HS 1.00D
    • pixel::doc homebase
Re: SD 4000 IS / IXUS 300 HS / IXY 30S porting thread
« Reply #264 on: 31 / May / 2011, 19:35:55 »
I took a little timeout from chdk.

Beta v11

Uploaded Beta v11 based on current CHDK trunk #1195 and my last commit .

Download

EDIT: Added Beta v11 source into CHDK Trunk at #1196, but Autobuild is disabled for now.
« Last Edit: 01 / June / 2011, 20:02:41 by pixeldoc2000 »

Re: SD 4000 IS / IXUS 300 HS / IXY 30S porting thread
« Reply #265 on: 02 / June / 2011, 03:56:24 »
Is it normal that the zip is around 140KB smaller than the others? Build date also displays the one from beta10 here.

*

Offline whim

  • ******
  • 2046
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: SD 4000 IS / IXUS 300 HS / IXY 30S porting thread
« Reply #266 on: 02 / June / 2011, 04:52:17 »
@Benjamin_L

A full pack of binaries is available from CHDK-DE download page here
If you want it to default to English language, just delete CHDK/LANG/german.lng.

hope that helps,

wim

*

Offline Yury

  • *
  • 15
  • IXUS 300HS 1.00D, IXUS 980IS 1.01B
Re: SD 4000 IS / IXUS 300 HS / IXY 30S porting thread
« Reply #267 on: 02 / June / 2011, 15:03:20 »
pixeldoc2000 thanks for new beta

I had a hope that in new beta auto loading from big flash cards will work. Are you still planing to make this?

Re: SD 4000 IS / IXUS 300 HS / IXY 30S porting thread
« Reply #268 on: 03 / June / 2011, 02:52:17 »
pixeldoc2000 thanks for new beta

I had a hope that in new beta auto loading from big flash cards will work. Are you still planing to make this?

same here ;)

*

Offline pixeldoc2000

  • ****
  • 356
  • IXUS900Ti 1.00C, IXUS300HS 1.00D
    • pixel::doc homebase
Re: SD 4000 IS / IXUS 300 HS / IXY 30S porting thread
« Reply #269 on: 04 / June / 2011, 15:45:08 »
Is it normal that the zip is around 140KB smaller than the others? Build date also displays the one from beta10 here.
chdk_ixus300_sd4000-100d-0.9.9-full_beta_v11.zip does not contain PS.FI2 for chdk autostart.

I had a hope that in new beta auto loading from big flash cards will work. Are you still planing to make this?
I know chdk autostart does not work. I've already spend some hours on it a while ago. Don't really know how to fix it...
« Last Edit: 04 / June / 2011, 22:03:04 by pixeldoc2000 »

 

Related Topics


SimplePortal © 2008-2014, SimplePortal