A3000IS poring thread - page 5 - DryOS Development - CHDK Forum

A3000IS poring thread

  • 142 Replies
  • 30405 Views
*

Offline ERR99

  • ****
  • 339
Re: A3000IS poring thread
« Reply #40 on: 26 / January / 2011, 12:33:41 »
Advertisements
An here the build for 1.00d cameras:

Re: A3000IS porting thread
« Reply #41 on: 27 / January / 2011, 04:03:46 »
Thanks for the new builds ERR99.

1.00b is working great. .dngs are created straight from the camera and works!
Mac os x 10.5.x



« Last Edit: 29 / January / 2011, 08:07:03 by mellowprod »

Re: A3000IS poring thread
« Reply #42 on: 31 / January / 2011, 11:10:15 »
Hi,

I've tested on the latest build for 1.0b

It really works.

The the loading scripts are annoying and I can;t get into the menu when it keep running scripts.

This is the first time I'm using the CHDK and I find it difficult to adapt to the common interface especially those techie settings.

I seriously need a manual just to play around the settings.

But it's a success booting CHDK and hopefully this project will come out with a much simpler user friendly interface.

I'm not too sure what works & what;s not, cause this is the first time using it.

Taking few picture with those .

So far exposure time & dng works as it should.

But ISO didn't seems to work.
Or the captured information is wrong.



Thanks for the great build.

Re: A3000IS poring thread
« Reply #43 on: 31 / January / 2011, 12:27:10 »
Now:
- Videmode overrides ( optical zoom, AF-rescan ) are working
- Extra Photo operations (ISO, Shuttertime, etc.) are working
- Edge overlay, Histrogram is working (but we false colors, palette seems to be changed again in 2010 cameras...)
- USB remote trigger works
- JPEG super fine works
- Scripting seems to work
- >4GB SD Card support (two partition support) is working
Is Motion detect triggering working?  If so, I'll run out and get an A3000.  Maybe I'll even be lucky enough to get a firmware version other than 1.00b or 1.00d and have a chance to try and a firmware version port.
Also, any chance the A3000 source code will be checked into the main repository?
« Last Edit: 31 / January / 2011, 18:43:46 by MikeGodin »


*

Offline TT34

  • *
  • 12
    • PromEnergy Group, Ltd.
Re: A3000IS poring thread
« Reply #44 on: 01 / February / 2011, 23:46:33 »
Hi, ERR99, I've got a problem with my A3000 IS cam. firmware version is a 1.0.0.C and no one port is applied correctly. I tried couple of 100b, 100d but no result. Could you please perform any smallest port for 100C version? I bought it in Russia so I've no idea why C firmware in it, other technical params is the same bu PAL-D - 31F2
Thanks in advance!

Michael

*

Offline TT34

  • *
  • 12
    • PromEnergy Group, Ltd.
Re: A3000IS poring thread
« Reply #45 on: 01 / February / 2011, 23:49:24 »
2ERR99, forgot to say that when 100d or 100b is applied on my cam it's going to reboot after OK UPDATE FIRMWARE and wouldn't boot up. Only after battery removing it booting up.

*

Offline ERR99

  • ****
  • 339
Re: A3000IS poring thread
« Reply #46 on: 02 / February / 2011, 13:41:26 »
Now:
- Videmode overrides ( optical zoom, AF-rescan ) are working
- Extra Photo operations (ISO, Shuttertime, etc.) are working
- Edge overlay, Histrogram is working (but we false colors, palette seems to be changed again in 2010 cameras...)
- USB remote trigger works
- JPEG super fine works
- Scripting seems to work
- >4GB SD Card support (two partition support) is working
Is Motion detect triggering working?  If so, I'll run out and get an A3000.  Maybe I'll even be lucky enough to get a firmware version other than 1.00b or 1.00d and have a chance to try and a firmware version port.
Also, any chance the A3000 source code will be checked into the main repository?
The combination of working scripting and photo opererations leads to only one answer: Yes, Motion triggering is working. ;)

*

Offline ERR99

  • ****
  • 339
Re: A3000IS poring thread
« Reply #47 on: 02 / February / 2011, 13:45:06 »
Hi, ERR99, I've got a problem with my A3000 IS cam. firmware version is a 1.0.0.C and no one port is applied correctly. I tried couple of 100b, 100d but no result. Could you please perform any smallest port for 100C version? I bought it in Russia so I've no idea why C firmware in it, other technical params is the same bu PAL-D - 31F2
Thanks in advance!

Michael
To do the port for a new fw-version, a dump of the 100c fw is needed. I dont have a 1.00c fw camera, so you have to dump the original 1.00c firmware from your camera (see wiki how to do this) and upload the dump to one of the file hosting services and post the link to the firmware here. Then, if i find the time, i will do a port (based on your fw-dump) for this firmware.


*

Offline TT34

  • *
  • 12
    • PromEnergy Group, Ltd.
Re: A3000IS poring thread
« Reply #48 on: 03 / February / 2011, 11:11:05 »
Thanks, I'll try to make a dump.

*

Offline TT34

  • *
  • 12
    • PromEnergy Group, Ltd.
Re: A3000IS poring thread
« Reply #49 on: 03 / February / 2011, 13:30:40 »
Seems wiki doesn't help me, I just have no idea where get the udumper. Links at forums wiki and chdk.clan.su broken and google wouldn't get results. Anyone have a link for udumper?

 

Related Topics