A3000IS poring thread

phil001

1

Re: A3000IS poring thread

« Reply #10 on: 25 / December / 2010, 09:42:28 »

Advertisements

""Hi, I had a canon A300is and when I want to use "Firm update" the camera shout down and didn't turn on. How I may do it in good way?

Logged

ERR99

339

Re: A3000IS poring thread

« Reply #11 on: 25 / December / 2010, 11:08:07 »

This port is for A3000IS with original firmware 1.00d.
Do you have 1.00d on your camera installed? (check using the ver.req / vers.req method).

Logged

ERR99

339

Re: A3000IS poring thread

« Reply #12 on: 04 / January / 2011, 03:56:07 »

Okay, if i look on the download count of the chdk test build and the fact that there are almost no errors reported, i assume this version is working perfectly, i am right?

Logged

lithoc

5

Re: A3000IS poring thread

« Reply #13 on: 05 / January / 2011, 01:15:19 »

I've a A3000IS but it's with my relatives.

I'll try it when got chance

I own a A75 and felt A3000IS miss a lot of the full manual function which I really like.
eg. manual focus, flash control, aperture control.

Another feature I would like to have is the capturing RAW image.

Not sure this version have all the feature I wanted and how easy is the menu can be access.

Thanks a lot for this piggy back firmware

Logged

lucaslt

3

Re: A3000IS poring thread

« Reply #14 on: 05 / January / 2011, 11:06:22 »

Greets!

First, I HAVE to thank you for this port, ERR99. I'm so glad you made it. Now I can make good use of my A3000.

But... I think I got a problem. See, my A3000 has the 1.00C firm installed. So what should I do to get CHDK working on my camera? I'm sorry for asking this 'basic' question, but I'm really noob at this

is there an article explaining what can I do?

Thanks.

Logged

ERR99

339

Re: A3000IS poring thread

« Reply #15 on: 07 / January / 2011, 03:47:38 »

Quote from: lithoc on 05 / January / 2011, 01:15:19

I've a A3000IS but it's with my relatives.

I'll try it when got chance

I own a A75 and felt A3000IS miss a lot of the full manual function which I really like.
eg. manual focus, flash control, aperture control.

Another feature I would like to have is the capturing RAW image.

Not sure this version have all the feature I wanted and how easy is the menu can be access.

Thanks a lot for this piggy back firmware

A lot of this stuff should allready working with the above posted CHDK test build.
But dont forget the this simple cameras does not have a "real" aperture to control, they use a neutral density filter to simulate different apertures. I did not test the flash control stuff. The manual focus is currently not implemented, but i will take a look at this i find the time.

Logged

ERR99

339

Re: A3000IS poring thread

« Reply #16 on: 07 / January / 2011, 03:57:30 »

Quote from: lucaslt on 05 / January / 2011, 11:06:22

But... I think I got a problem. See, my A3000 has the 1.00C firm installed. So what should I do to get CHDK working on my camera? I'm sorry for asking this 'basic' question, but I'm really noob at this is there an article explaining what can I do?

The above posted CHDK build was made based on the 1.00D firmware. It now depends how great the difference is between 1.00D and 1.00C firmware version. I suggest you simply try to start the PS.FI2 version via firmware update methode (dont worry, this methode does not change the firmware on your camera, it simply loads the CHDK build into RAM and starts it). If the camera crashes/switches off, we need a adapted CHDK build for 1.00C firmware. If the camera (re)starts succesfull and you see the CHDK splash screen, there is a good change that nothing CHDK related has changed between this FW-Versions.

Logged

mugger

3

Re: A3000IS poring thread

« Reply #17 on: 07 / January / 2011, 11:56:57 »

Hi,

i have a a3000 to and tried the firmware - and it workt 1 time - 2. time ist warns bec. low battery.

The mainproblem is: i dont know hot to get to the "update firmware" entry.

Can you tell me the right comb. ?

Logged

fe50

3152
IXUS50 & 860, SX10 Star WARs-Star RAWs

Re: A3000IS poring thread

« Reply #18 on: 07 / January / 2011, 19:54:37 »

Hello & welcome, mugger !

Quote from: mugger on 07 / January / 2011, 11:56:57

The mainproblem is: i dont know hot to get to the "update firmware" entry.

Copy the file PS.FI2 to the root of your SD card, power on the camera with the PLAYBACK [>] button (lens retracted), then enter the Canon setup menu, scroll down...

Notes:
- make sure there's a still image (JPG) in preview, not a video file
- on a Mac you'll have to remove the quarantine flage of the ps.fi2 file

Logged

-->FIRMWARE DUMPS<-- * Manual * Lua * me

mellowprod

10

Re: A3000IS poring thread

« Reply #19 on: 08 / January / 2011, 16:11:21 »

Quote from: ERR99 on 07 / January / 2011, 03:57:30

Quote from: lucaslt on 05 / January / 2011, 11:06:22
But... I think I got a problem. See, my A3000 has the 1.00C firm installed. So what should I do to get CHDK working on my camera? I'm sorry for asking this 'basic' question, but I'm really noob at this is there an article explaining what can I do?

The above posted CHDK build was made based on the 1.00D firmware. It now depends how great the difference is between 1.00D and 1.00C firmware version. I suggest you simply try to start the PS.FI2 version via firmware update methode (dont worry, this methode does not change the firmware on your camera, it simply loads the CHDK build into RAM and starts it). If the camera crashes/switches off, we need a adapted CHDK build for 1.00C firmware. If the camera (re)starts succesfull and you see the CHDK splash screen, there is a good change that nothing CHDK related has changed between this FW-Versions.

Hi, I placed the files (cleaned from Mac quarantine flag) on a FAT16 formatted SD partition, camera seems to see the update but goes black when executing FW update. Unfortunately I can see my A3000 is only ver 1.00b. Is there anyway that I can possibly update it to 1.00d?
Thank you.

Logged