battery discharged uptaditng the firmaware - General Help and Assistance on using CHDK stable releases - CHDK Forum

battery discharged uptaditng the firmaware

  • 1 Replies
  • 1210 Views
battery discharged uptaditng the firmaware
« on: 01 / September / 2010, 12:20:02 »
Advertisements
while updating the firmware on my S90 the battery is discharged. Now I can not access the menu to upgrade the machine.! HELP URGENT!

*

Offline zeno

  • *****
  • 889
Re: battery discharged uptaditng the firmaware
« Reply #1 on: 01 / September / 2010, 12:46:44 »
Hu Kitefre


your post is a bit ambiguous. Were you:

1. updating the firmware in your s90 using a firmware update supplied by Canon, or
2. loading CHDK using the 'firmware update' method

If (2), then there should be no problem. Your camera's firmware has not been altered - what CHDK does is use the Canon firmware update mechanism to load CHDK into memory - there's no permanent change to your camera. Just recharge the battery and try again. If it doesn't see to work, make sure you are following the CHDK install instructions properly (see http://chdk.wikia.com/wiki/CHDK_for_Dummies#Load_CHDK_onto_the_card).

If (1) then you may have a problem that only Canon can fix (though I'm not aware there are any s90 firmware updates).
A570, S100, Ixus 127
Author of ASSIST, STICK, WASP, ACID, SDMInst, LICKS, WICKS, MacBoot, UBDB, CFGEdit

 

Related Topics