Chdk for SX130 IS ? - page 16 - CHDK Releases - CHDK Forum supplierdeeply

Chdk for SX130 IS ?

  • 1095 Replies
  • 265868 Views
Re: Chdk for SX130 IS ?
« Reply #150 on: 31 / January / 2011, 10:57:58 »
Advertisements
What program are you guys using to open the raw file chdk pumps out? I've tryed a few and none of them seem to be able to open the crw file format.

Re: Chdk for SX130 IS ?
« Reply #151 on: 31 / January / 2011, 11:10:33 »
To open RAW file try http://www.irfanview.com/ and make sure you install the plugins as well.

*

Offline quid

  • **
  • 67
  • SX130IS
Re: Chdk for SX130 IS ?
« Reply #152 on: 31 / January / 2011, 14:59:34 »
@alvm: I don't know why, but from what I read on forum, this problem exists on many cameras.

@Russellvg: You can also use RawTherapee (http://www.rawtherapee.com/) or enable DNG, but I think you can get more answers on our "RAW Shooting and Processing" forum :)

*

Offline Anton

  • *
  • 13
Re: Chdk for SX130 IS ?
« Reply #153 on: 01 / February / 2011, 05:59:29 »
Congratulations, great job!
I use latest software update Canon and CHDK (#136)
When i use CHDK-Function "Show memory info" CHDK Start-screen appears and then Camera crashes.
I use a 2GB Memory-Card with 1 Partition and autostart CHDK.
Is this normal on this Software Version?


*

Offline quid

  • **
  • 67
  • SX130IS
Re: Chdk for SX130 IS ?
« Reply #154 on: 01 / February / 2011, 12:40:39 »
No, it's not normal. Are you absolutely sure you have correct firmware version (GM1.01C)? You can check it using instructions from this page: http://chdk.wikia.com/wiki/CHDK_for_Dummies#How_to_check_the_firmware_version_of_a_Canon_P.26S_camera

*

Offline Anton

  • *
  • 13
Re: Chdk for SX130 IS ?
« Reply #155 on: 01 / February / 2011, 12:58:06 »
verified once more....
same result
« Last Edit: 01 / February / 2011, 13:07:53 by Anton »

*

Offline quid

  • **
  • 67
  • SX130IS
Re: Chdk for SX130 IS ?
« Reply #156 on: 01 / February / 2011, 13:07:30 »
Do you have pictures on card? Can you check this again using empty SD card (make copy if you need) with only DISKBOOT.BIN on it, and going immediately after start to "Show memory info"?

*

Offline Anton

  • *
  • 13
Re: Chdk for SX130 IS ?
« Reply #157 on: 01 / February / 2011, 13:28:23 »
@quid
Empty card with only DISKBOOT.BIN on it => no crash
Card with sx130is-101c-0.9.9-full.zip (Reply #82) and changes from sx130is-101c-0.9.9.zip (Reply #136) and deleted directory DCIM => crash


*

Offline quid

  • **
  • 67
  • SX130IS
Re: Chdk for SX130 IS ?
« Reply #158 on: 01 / February / 2011, 14:05:41 »
I still can't reproduce this crash. Are you extracting fresh copy from reply #82 to empty card, or using your copy from backup (which may include your config file)?

*

Offline Anton

  • *
  • 13
Re: Chdk for SX130 IS ?
« Reply #159 on: 01 / February / 2011, 16:21:52 »
@quid
There seems to be a fault in Language File GERMAN.LNG
Using ENGLISH.LNG there is no crash.
On both I'm using OSD Codepage Win1252.....


 

Related Topics