this is copied and pasted from this page
http://www.usa.canon.com/cusa/support/consumer/digital_cameras/other_powershot/powershot_sx130_is#DriversAndSoftwareFile Name
pssx130is-1010-e.exe
File Version
1.0.1.0
File Size
2.38 MB
Post Date
10/08/2010
Download and Installation Instructions
Firmware Update (Version 1.0.1.0) fixes a phenomenon in which the audio and
video get recorded out of sync when shooting movies with the image quality
set to high definition (1280x720 pixels).
This phenomenon occurs gradually from the start of recording and becomes
more noticeable as the recording time gets longer.
* The longest HD movies this model can record at one time are approximately
10 minutes in length. This phenomenon occurs only when the image quality is set
to HD; it does not occur in other settings (640x480 pixels or 320x240 pixels).
most SX130s bought came with This Firmware update so i guess this was meant for people who bought the camera before issue was found
@aldous use this script for now its written by outslider
@title MultiMovie
@param x one part time in sec
@default x 590
f=0
print "record will start..."
press "shoot_half"
sleep 1500
:new
f=f+1
press "shoot_full"
release "shoot_full"
if f=1 then release "shoot_half"
print "file number: ";f
s=get_time 0
m=get_time 1
h=get_time 2
d=get_time 3
b=s+m*60+h*3600+d*3600*24
:loop
s=get_time 0
m=get_time 1
h=get_time 2
d=get_time 3
t=s+m*60+h*3600+d*3600*24
u=t-b
print "file number: ";f
print "time left:";x-u
if u>x then goto "reload"
sleep 900
goto "loop"
:reload
print "reloading..."
press "shoot_full"
release "shoot_full"
print "waiting for ready..."
:waitloop
q=get_movie_status
if q=1 then goto "new"
print "status:",q
sleep 100
goto "waitloop"
it basiclly records for however long its set for (i tested it can be set above 10 min for HD video but camera will stop recording at it) saves the file and automatically starts recording again set the default to 3600 if you use non hd-video as cannon decided to (stupidly unless they come out and said why) cap non-hd video at an hour copy it put it in notepad save it and change the .txt to .bas and put it in the scripts folder in CHDK
