IXUS 105 / SD1300 IS porting thread - page 8 - DryOS Development - CHDK Forum
supplierdeeply

IXUS 105 / SD1300 IS porting thread

  • 772 Replies
  • 180403 Views
Re: IXUS 105 / SD1300 IS porting thread
« Reply #70 on: 23 / December / 2010, 08:41:45 »
Advertisements
http://www.box.net/chdk/6/55272271/536017391
Firmware dump for 105

http://www.filedropper.com/diskboot
Compiled for 105

Is the compile for 105 D?

Re: IXUS 105 / SD1300 IS porting thread
« Reply #71 on: 23 / December / 2010, 08:50:05 »
http://www.box.net/chdk/6/55272271/536017391
Firmware dump for 105

http://www.filedropper.com/diskboot
Compiled for 105

Is the compile for 105 D?

http://www.filedropper.com/chdk

Recompiled. Just extract them in SD Card's root directory.
In caminfo.txt you will find ixus105_sd1300-100d (dryos, #12788): MEMISOSIZE used: 0x46292

Re: IXUS 105 / SD1300 IS porting thread
« Reply #72 on: 23 / December / 2010, 09:15:15 »
http://www.box.net/chdk/6/55272271/536017391
Firmware dump for 105

http://www.filedropper.com/diskboot
Compiled for 105

Is the compile for 105 D?

http://www.filedropper.com/chdk

Recompiled. Just extract them in SD Card's root directory.
In caminfo.txt you will find ixus105_sd1300-100d (dryos, #12788): MEMISOSIZE used: 0x46292
ok, I just gave it a try.  I get a memory card error.
Then on the display, I am reading :

CHDK raw
CHDK Firmnware 'chdk 0.9.9'
Build Dec 23 2010 22:27:27

And nothing more.

Any explanation?
Do you have the uncompile chdk?
Do you have any working scripts?

Re: IXUS 105 / SD1300 IS porting thread
« Reply #73 on: 23 / December / 2010, 11:33:50 »
Seems to work here: well, to be more accurate, I have the splash screen, and I can browse menus).
I didn't test the functions yet, as I'm not sure to have fully understand what is working exactly hehe :)

@C10ud:
1. Many thanks for your work :)
2. You talked about "shoot()", some LUA stuff and PTP. Could you explain a bit ?
PS: I also have the same bug you describe when attempting to load a script... In fact, I'm trying to find a way to make some automatic "recursive" shooting (for timelapse...).

Any help is appreciated; thanks again !


Re: IXUS 105 / SD1300 IS porting thread
« Reply #74 on: 23 / December / 2010, 12:03:13 »
Seems to work here: well, to be more accurate, I have the splash screen, and I can browse menus).
I didn't test the functions yet, as I'm not sure to have fully understand what is working exactly hehe :)

Any help is appreciated; thanks again !

What kind of sd card are you using?  I will try another card.

I need it because, I will use it in a sounding balloon.

Re: IXUS 105 / SD1300 IS porting thread
« Reply #75 on: 23 / December / 2010, 12:13:43 »
This one:

Re: IXUS 105 / SD1300 IS porting thread
« Reply #76 on: 23 / December / 2010, 13:07:58 »
Did you used cardtrick to format your disk?

Re: IXUS 105 / SD1300 IS porting thread
« Reply #77 on: 23 / December / 2010, 13:21:24 »
Yes, I followed the tutorial, format with Cardtricks, make bootable etc


Re: IXUS 105 / SD1300 IS porting thread
« Reply #78 on: 23 / December / 2010, 13:25:13 »
ok, I reformat the card and i see no more "card error".

1. Where is the ALT button??
2. On the OSD screen, I see "calc" and then there is a small window with "0000 KB/s" and under it: "-00:00:00" then nothing more.  How do I get to the menu?

Do you have the samething on your side?  I am using a 4GB SDHC Card Nexxtech.

« Last Edit: 23 / December / 2010, 13:29:50 by siocnarf »

*

Offline whim

  • ******
  • 2041
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: IXUS 105 / SD1300 IS porting thread
« Reply #79 on: 23 / December / 2010, 14:46:17 »
@siocnarf

FAQ Q.19 says:

Quote
Q. What are the key settings and shortcuts?

A. Here is a list of important key settings and shortcuts. Have a look at the firmware usage guide for detailed explanations. Note that you can press and hold down certain keys to simulate pressing this key multiple times, just like your PC keyboard.

camera-specific key settings:

    * Enter <ALT> mode:

    - direct print button for A and IXUS/SD-series cams
    - user selectable button for S-series * ( shortcut by default )

        * See the Firmware Usage pages of <ALT> mode and/or Miscellaneous Menu on how to select and use the button of your choice for entering and exiting <ALT> mode.
..................
<lots more keys described>

HTH,

wim

 

Related Topics