Heres the code I'm using. Actaully, its sort of working now. You see what I was trying to achieve is to get the same effect one would get if you go into bracketing menu and set EV to 1/3 and then set TV to like 3 times and keep the shoot pressed.
All I wanted was to achieve the same as above with a script, after putting my cam on a tripod, cause as we all know, my IS is shot..lol
Anyway with below parameters I seem to achieve the same sort of bracketing.
@title Time-lapse
@param a first delay minutes
@default a 0
@param b first delay seconds
@default b 0
@param c shoot interval minutes
@default c 0
@param d shoot interval seconds
@default d 0
@param e number of repeats
@default e 0
@param f endless mode N/Y 0/1
@default f 1
@param g single/cont/time/burst
@default g 1
@param h Tv exposures
@default h 20
@param i Focus exposures
@default i 0
@param j bracket Tv/foc/Both 0/2
@default j 2
@param k light/dark/alternate 0/1/2
@default k 2
@param l num of 1/3 EV steps
@default l 1
@param m equal/auto/digi 0-2
@default m 0
@param n focus-step
@default n 0
@param p digiscope focus ref
@default p 0
@param q blank screen N/Y 0/1
@default q 0
@param r shutdown N/Auto/USB 0/1/2
@default r 0
@param s save stack N/Y 0/1
@default s 0
@param t Sunrise mode
@default t 0
@param u TXT/CSV 0/1
@default u 0
print "Stop Scr when LED"
print "is GREEN or"
print "is RED."
auto_focus_all
time_lapse a, b, c, d, e, f, g, h, i, j, k, l, m, n, p, q, r, s, t, u
end
Basically what I changed are:
endless - 1
single - 1
tv exp - 30
bracket tv - 2
light/dark - 2
num of 1/3 - 2
Also Ive noticed it takes 3 shots at a single Tv value, why 3? Why not 5?
Oh and setting @param j bracket Tv/foc/Both to 0 (tv) does nothing, it does what I said in an earlier post, i.e flash an orange and then does nothing.
If you can suggest any improvement so I get closest possible brackets, both light and dark, that would be great. Otherwise the above seem to do for now.