IXUS 1000 HS Porting Thread - page 39 - DryOS Development - CHDK Forum

IXUS 1000 HS Porting Thread

  • 437 Replies
  • 115583 Views
Re: IXUS 1000 HS Porting Thread
« Reply #380 on: 20 / February / 2015, 19:17:59 »
Advertisements
Was there anything else specifically that needed to be tested?  I've had a couple non-reproducible crashes but that was when mixing odd shooting modes with CHDK hacks, like the rapid fire mode with RAW turned on.  Only happened once.  Any idea when to expect a non-test build to be available?

*

Offline nafraf

  • *****
  • 1308
Re: IXUS 1000 HS Porting Thread
« Reply #381 on: 20 / February / 2015, 23:14:09 »

*

Offline fe50

  • ******
  • 3127
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: IXUS 1000 HS Porting Thread
« Reply #382 on: 22 / February / 2015, 04:43:30 »
Added the
  • IXUS1000 / SD4500 1.02E
full 8MB dump by pikoro from this forum post to the CHDK P&S FW dumps repository.

Re: IXUS 1000 HS Porting Thread
« Reply #383 on: 27 / February / 2015, 05:40:48 »
Some tests:
- USB Remote
- Dark frame subtraction

and more tests :)
http://chdk.wikia.com/wiki/Testing

Sorry.  I work a midnight shift Sunday - Thursday.  My test version expired but it still seems to work.  I just tested the USB Remote and it works as expected.


Re: IXUS 1000 HS Porting Thread
« Reply #384 on: 22 / October / 2015, 07:19:09 »

*

Offline srsa_4c

  • ******
  • 4384
Re: IXUS 1000 HS Porting Thread
« Reply #385 on: 23 / October / 2015, 13:41:39 »
Hi, attached 102d firmware dump
https://drive.google.com/open?id=0BzY65rUklGeud0NyellvMDVtWW8
Thanks for the dump.
The code_gen.txt from Nafraf's 101a port can be used without any change on 102d, so I'm not even attaching it (no other changes are required).
Can you test the attached build?

*

Offline fe50

  • ******
  • 3127
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: IXUS 1000 HS Porting Thread
« Reply #386 on: 25 / October / 2015, 04:26:08 »
Added the
  • IXUS1000 / SD4500 1.02D
full 8MB dump by ojy_97 from this forum post to the CHDK P&S FW dumps repository.

Re: IXUS 1000 HS Porting Thread
« Reply #387 on: 31 / October / 2015, 04:49:59 »
Hi, attached 102d firmware dump
https://drive.google.com/open?id=0BzY65rUklGeud0NyellvMDVtWW8
Thanks for the dump.
The code_gen.txt from Nafraf's 101a port can be used without any change on 102d, so I'm not even attaching it (no other changes are required).
Can you test the attached build?
Hi, im new on CHDK and i does not really know how to test the build (sorry  :P) . The only thing i know is the CHDK loaded successfully and the camera do Saves RAW image. (but i not sure is the RAW saves all the "data" capture by the sensor)
« Last Edit: 31 / October / 2015, 05:01:59 by ojy_97 »


*

Offline srsa_4c

  • ******
  • 4384
Re: IXUS 1000 HS Porting Thread
« Reply #388 on: 31 / October / 2015, 07:07:54 »
The only thing i know is the CHDK loaded successfully and the camera do Saves RAW image.
Thanks, that's all I need to know. The port should behave identical to the 101a port which means RAW is very likely OK (if you shoot DNGs, it should be easy to test).

@nafraf

If you're reading this, can you write some details about the 102e port? If that is also based on the 101a port, we could just add 102d and 102e and enable them in autobuild.

*

Offline nafraf

  • *****
  • 1308
Re: IXUS 1000 HS Porting Thread
« Reply #389 on: 31 / October / 2015, 09:56:32 »
 :'( I think I forgot to commit 102e port.
The port is based on 101a, it uses the same code_gen.txt. The sub/102e files in attachment.

 

Related Topics