supplierdeeply

SD940 (IXUS120) porting thread

  • 542 Replies
  • 69887 Views
Re: SD940 (IXUS120) porting thread
« Reply #510 on: 28 / June / 2011, 19:07:49 »
Advertisements
Last Question, I promise. Got the Intervalometer working real nicely. Now, is there a script I can run to get the screen on the back to turn off immediately after it shoots? The default power saver only goes as low as 10 seconds, I'm hoping for a 3-5. What might I search under?
Questions are good.   I'd start by searching the forum for "backlight".  Lots of posts - not sure if there is a magic answer, or at least a magic answer that works for the SD940.   Report back here if you work it out ?

Ported :   A1200    SD940   G10    Powershot N    G16

Re: SD940 (IXUS120) porting thread
« Reply #511 on: 30 / June / 2011, 18:15:26 »
Quote
The 100e has several fixes to its stubs_min.S file so let's see if that fixed the uBasic script issues.
UPDATE : these changes now available through the autobuild server.

Just tried 100e-0.9.9-1218 from the build server but no luck. I've tried script with P mode, Auto mode, single shot and continuous drive.

Is there anything I can do my end to help troubleshoot?

Thanks

Re: SD940 (IXUS120) porting thread
« Reply #512 on: 30 / June / 2011, 19:43:30 »
Just tried 100e-0.9.9-1218 from the build server but no luck. I've tried script with P mode, Auto mode, single shot and continuous drive.
So does the script I posted here work ?  http://chdk.setepontos.com/index.php?topic=5855.msg69243#msg69243

Where does it stop ?  After the first shoot ? What is the last thing printed on the display ?

Ported :   A1200    SD940   G10    Powershot N    G16

Re: SD940 (IXUS120) porting thread
« Reply #513 on: 04 / July / 2011, 16:40:30 »
Where does it stop ?  After the first shoot ? What is the last thing printed on the display ?

After the first shot. So "sleep over, about to shoot..." is the last message you see.


Re: SD940 (IXUS120) porting thread
« Reply #514 on: 04 / July / 2011, 17:28:14 »
Where does it stop ?  After the first shoot ? What is the last thing printed on the display ?

After the first shot. So "sleep over, about to shoot..." is the last message you see.
Does it actually capture an image and save that to the SD card?  Also, it probably doesn't matter but do you have RAW disabled?

Ported :   A1200    SD940   G10    Powershot N    G16

Re: SD940 (IXUS120) porting thread
« Reply #515 on: 28 / July / 2011, 07:08:48 »
Does it actually capture an image and save that to the SD card?  Also, it probably doesn't matter but do you have RAW disabled?
Hi Waterwingz.

It takes the first shot, saves it then doesn't run anything else in the script.

I think I may give my 1.00e to my brother in law as he needs a quality pocket camera. If I do i'll be getting another CHDKable sd940 in the future and finally getting that stereo rig working.

Thanks for all your work on this. My 1.03b works like a charm.

Re: SD940 (IXUS120) porting thread
« Reply #516 on: 28 / July / 2011, 18:41:31 »
I think I may give my 1.00e to my brother in law as he needs a quality pocket camera. If I do i'll be getting another CHDKable sd940 in the future and finally getting that stereo rig working.
I just rebuilt the 1.00e with the newest sigfinder2 and checked its output.  Unfortunately,  it didn't find anything suspicious.  So whatever is causing this is going to be a lot of work to fix.

Quote
Thanks for all your work on this. My 1.03b works like a charm.
You're welcome.  Although,  the 1.03b version is the only one that I did not actually port myself :)
Ported :   A1200    SD940   G10    Powershot N    G16

Re: SD940 (IXUS120) porting thread
« Reply #517 on: 30 / July / 2011, 18:34:41 »
NOTE:  IXUS120-SD940 updated in the autobuild server today with a fix for the dissappearing menu problem in shooting mode.
Ported :   A1200    SD940   G10    Powershot N    G16


Re: SD940 (IXUS120) porting thread
« Reply #518 on: 30 / August / 2011, 12:10:27 »

Re: SD940 (IXUS120) porting thread
« Reply #519 on: 30 / August / 2011, 12:43:42 »
Ported :   A1200    SD940   G10    Powershot N    G16

 

Related Topics