SD940 (IXUS120) porting thread - page 43 - DryOS Development - CHDK Forum
supplierdeeply

SD940 (IXUS120) porting thread

  • 542 Replies
  • 156439 Views
Re: SD940 (IXUS120) porting thread
« Reply #420 on: 10 / April / 2011, 12:03:53 »
Advertisements
are you planning port CHDK for firmware GM1.01A? Thank you!
Try this :
http://www.box.net/shared/yfhnxbj32a
You should be able to get the CHDK logo to show and the menus to work.  Shooting functions not implemented yet - I need somebody to test this and report back so that I know my porting utility is working.

Thanks.
Ported :   A1200    SD940   G10    Powershot N    G16

Re: SD940 (IXUS120) porting thread
« Reply #421 on: 11 / April / 2011, 20:47:05 »
Updates to all firmware versions now in the autobuild server to patch for crashing on startup. More information at :

http://chdk.setepontos.com/index.php?topic=6179.msg62619#msg62619.
Ported :   A1200    SD940   G10    Powershot N    G16

Re: SD940 (IXUS120) porting thread
« Reply #422 on: 11 / April / 2011, 21:06:44 »
Sweet! looks good so far...

Re: SD940 (IXUS120) porting thread
« Reply #423 on: 13 / April / 2011, 14:40:54 »
hi waterwingz
i have the canon ixux120 with firmware GM1.01A
i ve download the chdk http://www.box.net/shared/yfhnxbj32a from previous post
i can see the logo of chdk when i turn on the camera in playback mode, in shoot mode the optic doesent come out.
the camera semms to stay always in playback mode, i can enter and change values in chdk menu, but cannot take pic or go in shoot mode
let me know if u need more information

Gesualdo

« Last Edit: 13 / April / 2011, 15:59:07 by gesualdo »


Re: SD940 (IXUS120) porting thread
« Reply #424 on: 13 / April / 2011, 18:40:45 »
in shoot mode the optic doesent come out.
Hold down the On/Off button on the top of the camera (the shoot button) for 2 seconds and the camera should startup in shooting mode.   Or half-press the shutter release button when in playback mode and the camera should switch to shooting mode.

Ported :   A1200    SD940   G10    Powershot N    G16

Re: SD940 (IXUS120) porting thread
« Reply #425 on: 13 / April / 2011, 19:47:53 »
New version of CHDK for IXUS120 SD940 1.01A firmware now available at :

http://www.box.net/shared/mpb4zru12e

All code complete, everything should now work but this is completely untested (as I do not have a camera with this firmware version).



Ported :   A1200    SD940   G10    Powershot N    G16

Re: SD940 (IXUS120) porting thread
« Reply #426 on: 13 / April / 2011, 20:59:12 »
New version of CHDK for IXUS120 SD940 1.01A firmware now available at :

http://www.box.net/shared/mpb4zru12e

All code complete, everything should now work but this is completely untested (as I do not have a camera with this firmware version).





ok i ve tryed this version,
zoom in video mode and works
histogram is showed
raw shoots but photoshop desent open it even if i rename file in raf
zebra works
changing language works, i ve switched to italian
lol the battery has left me, i ll go to sleep now, tomorrow afterwork i will continue testing

ps, the chdk menu disappear sometimes from screen but when i press down or up in joypad it appear, seems have some problem when original canon firmware draw something on screen like focus point etc
see you tomorrow and tnx very much for this firmware
 

Re: SD940 (IXUS120) porting thread
« Reply #427 on: 13 / April / 2011, 21:09:51 »
Sounds like good news !

raw shoots but photoshop desent open it even if i rename file in raf
I don't think I checked the raw buffer address - it might be using the address from the 1.03C.  I'll look at it tonight.

UPDATE :  RAW buffer is correct.  Have you read the various posts on this forum about how CHDK RAW is not a standard format so you have to use "special" software to decode it ?
http://chdk.setepontos.com/index.php?topic=1532.0


ps, the chdk menu disappear sometimes from screen but when i press down or up in joypad it appear, seems have some problem when original canon firmware draw something on screen like focus point etc
This has been reported here before and my camera does the same thing as well.  Apparently this is normal behavior for CHDK and a know limitation with no fix.

« Last Edit: 13 / April / 2011, 21:42:24 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16


Re: SD940 (IXUS120) porting thread
« Reply #428 on: 13 / April / 2011, 22:38:04 »
last report and then i ve really go to sleep
as i write to u in email i still have problem with raw, now i can open in photoshop but the pic seems to be taken with a fish eye.

i ve tryed to use scripts, the one i ve used is http://chdk.wikia.com/wiki/UBASIC/Scripts:_Ultra_Intervalometer works fine on my cam takes shoots in raw and in jpeg without problem

ps: the chdk battery level indicator is always at 0% the canon one works fine
« Last Edit: 13 / April / 2011, 22:40:33 by gesualdo »

Re: SD940 (IXUS120) porting thread
« Reply #429 on: 13 / April / 2011, 22:51:21 »
li still have problem with raw, now i can open in photoshop but the pic seems to be taken with a fish eye.
If you search this forum for discussions about CHDK RAW format, you will discover that Canon cameras do a lot of optical correction to each image before storing the image as a JPG on the card.  What you get with the CHDK RAW is the just that - the raw image before any processing.  The fish eye you are seeing is worst when you have the zoom set for wide angle - you can obtain software that will let you correct that.

Take a look at : http://chdk.setepontos.com/index.php?topic=6146


ps: the chdk battery level indicator is always at 0% the canon one works fine
You need to go into the setup menu and enter min & max values for the battery gage.  

« Last Edit: 17 / April / 2011, 08:16:28 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16

 

Related Topics