SD940 (IXUS120) porting thread

waterwingz

12138

Re: SD940 (IXUS120) porting thread

« Reply #510 on: 28 / June / 2011, 19:07:49 »

Advertisements

Quote from: sevnthsin on 28 / June / 2011, 18:42:36

Last Question, I promise. Got the Intervalometer working real nicely. Now, is there a script I can run to get the screen on the back to turn off immediately after it shoots? The default power saver only goes as low as 10 seconds, I'm hoping for a 3-5. What might I search under?

Questions are good. I'd start by searching the forum for "backlight". Lots of posts - not sure if there is a magic answer, or at least a magic answer that works for the SD940. Report back here if you work it out ?

Logged

Ported : A1200 SD940 G10 Powershot N G16

trogg

9

Re: SD940 (IXUS120) porting thread

« Reply #511 on: 30 / June / 2011, 18:15:26 »

Quote

The 100e has several fixes to its stubs_min.S file so let's see if that fixed the uBasic script issues.
UPDATE : these changes now available through the autobuild server.

Just tried 100e-0.9.9-1218 from the build server but no luck. I've tried script with P mode, Auto mode, single shot and continuous drive.

Is there anything I can do my end to help troubleshoot?

Thanks

Logged

waterwingz

12138

Re: SD940 (IXUS120) porting thread

« Reply #512 on: 30 / June / 2011, 19:43:30 »

Quote from: trogg on 30 / June / 2011, 18:15:26

Just tried 100e-0.9.9-1218 from the build server but no luck. I've tried script with P mode, Auto mode, single shot and continuous drive.

So does the script I posted here work ? http://chdk.setepontos.com/index.php?topic=5855.msg69243#msg69243

Where does it stop ? After the first shoot ? What is the last thing printed on the display ?

Logged

Ported : A1200 SD940 G10 Powershot N G16

trogg

9

Re: SD940 (IXUS120) porting thread

« Reply #513 on: 04 / July / 2011, 16:40:30 »

Quote from: waterwingz on 30 / June / 2011, 19:43:30

Where does it stop ? After the first shoot ? What is the last thing printed on the display ?

After the first shot. So "sleep over, about to shoot..." is the last message you see.

Logged

waterwingz

12138

Re: SD940 (IXUS120) porting thread

« Reply #514 on: 04 / July / 2011, 17:28:14 »

Quote from: trogg on 04 / July / 2011, 16:40:30

Quote from: waterwingz on 30 / June / 2011, 19:43:30
Where does it stop ? After the first shoot ? What is the last thing printed on the display ?

After the first shot. So "sleep over, about to shoot..." is the last message you see.

Does it actually capture an image and save that to the SD card? Also, it probably doesn't matter but do you have RAW disabled?

Logged

Ported : A1200 SD940 G10 Powershot N G16

trogg

9

Re: SD940 (IXUS120) porting thread

« Reply #515 on: 28 / July / 2011, 07:08:48 »

Quote from: waterwingz on 04 / July / 2011, 17:28:14

Does it actually capture an image and save that to the SD card? Also, it probably doesn't matter but do you have RAW disabled?

Hi Waterwingz.

It takes the first shot, saves it then doesn't run anything else in the script.

I think I may give my 1.00e to my brother in law as he needs a quality pocket camera. If I do i'll be getting another CHDKable sd940 in the future and finally getting that stereo rig working.

Thanks for all your work on this. My 1.03b works like a charm.

Logged

waterwingz

12138

Re: SD940 (IXUS120) porting thread

« Reply #516 on: 28 / July / 2011, 18:41:31 »

Quote from: trogg on 28 / July / 2011, 07:08:48

I think I may give my 1.00e to my brother in law as he needs a quality pocket camera. If I do i'll be getting another CHDKable sd940 in the future and finally getting that stereo rig working.

I just rebuilt the 1.00e with the newest sigfinder2 and checked its output. Unfortunately, it didn't find anything suspicious. So whatever is causing this is going to be a lot of work to fix.

Quote