SX30 IS porting thread - page 11 - General Discussion and Assistance - CHDK Forum

SX30 IS porting thread

  • 115 Replies
  • 63351 Views
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: SX30 IS porting thread
« Reply #100 on: 02 / June / 2011, 06:54:23 »
Advertisements
Hi,

it seems that there is a new Firmwareversion 1.00n out for SX30IS. My brand new Cam arrived yesterday and after trying to get CHDK running i've noticed that the Firmware is 1.00n and this doesn't match with the available ones 1.00e, 1.00h or 1.00l !

Therefore i've dumped the 1.00n Firmware manually via Scripting and you can download it here:

https://rapidshare.com/files/2708163410/PRIMARY.BIN

Hopefully someone is able to get the CHDK running with this Firmware together.

Best regards
tekknix

Here is an initial port to firmware 1.00n.

I would suggest trying manual booting first.
Unpack the zip file to your SD card (you should have DISKBOOT.BIN and PS.FI2 in the root directory).
Put the card in the camera (unlocked) and start the camera using the rear 'Play' mode button not the top power button.
Select the 'Firm Update..' option from the first menu - don't switch to record mode before doing this or the menu option won't be there.
You should get an option to update firmware from 1.0.0.0 to 1.1.0.0, this won't actually update the firmware, it's just how CHDK boots manually.

If all goes well the camera should restart with CHDK loaded - you should see the CHDK logo and be able to use CHDK functions.

Since I don't have a camera with this firmware version there's also a good chance it won't work at all.

Phil.

CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)

Re: SX30 IS porting thread
« Reply #101 on: 03 / June / 2011, 04:58:39 »
Will try this and report back.

Some questions, is it worth flashing an earlier firmware  eg L or is it even possible, just to try out the stable CHDK?
Is there a Canon firmware changelog available on the net?

Thanks and best regards,

Mus.

*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: SX30 IS porting thread
« Reply #102 on: 03 / June / 2011, 05:02:57 »
Will try this and report back.

Some questions, is it worth flashing an earlier firmware  eg L or is it even possible, just to try out the stable CHDK?
Is there a Canon firmware changelog available on the net?

Thanks and best regards,

Mus.


There are no firmware updates from Canon for the SX30 - it is extremely rare for Canon to release a firmware update unless major problems are found.

Phil.
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)

Re: SX30 IS porting thread
« Reply #103 on: 21 / July / 2011, 12:10:16 »
Hi all,

Seems that the SX30 has yet another new firmware version, 1.00P. Just got the camera in the last 48 hours, and I'll dump the firmware as soon as I figure out how to do so.

*

Online reyalp

  • ******
  • 14125
Re: SX30 IS porting thread
« Reply #104 on: 22 / July / 2011, 01:41:19 »
Seems that the SX30 has yet another new firmware version, 1.00P. Just got the camera in the last 48 hours, and I'll dump the firmware as soon as I figure out how to do so.
I suggest the canon basic dumper:
http://chdk.wikia.com/wiki/Canon_Basic/Scripts/Dumper
Be sure to read the card setup link first.

You can also try the CHDK build for the closest known firmware version (100N). Sometimes Canons changes are small enough that a new port is not needed. If it doesn't work, the worst it is likely to do is crash your camera and force you to take the batteries out to reboot. Of course, there is no guarantee - any use of CHDK is at your own risk whether it is the correct version or not.
Don't forget what the H stands for.

Re: SX30 IS porting thread
« Reply #105 on: 09 / August / 2011, 12:48:53 »
I called Canon tech support today and they said that the 1.00p version of the SX30 firmware doesn't exist!  I purchased my SX30 in the last couple of weeks and it has a 1.00n firmware rev code.  This is not to say that 1.00p doesn't exist.  Tech support has been known to be naive about such things.

What are the differences between the 1.00n and 1.00p firmware revs for the SX30?  What does the 1.00p rev fix?

Thanks,

Maverick

Re: SX30 IS porting thread
« Reply #106 on: 28 / September / 2011, 03:34:37 »
Has anyone created an adobe lens profile for the sx30 chdk raw yet?

*

Offline bojofbas

  • *
  • 22
  • SX50 100b
Re: SX30 IS porting thread
« Reply #107 on: 09 / October / 2011, 11:01:43 »

Any Porting planned for 1.00J ?

just bought the camera (in UK) and its at this firmware version

*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: SX30 IS porting thread
« Reply #108 on: 09 / October / 2011, 15:01:08 »

Any Porting planned for 1.00J ?

just bought the camera (in UK) and its at this firmware version

So far no-one has dumped the this firmware version - without this I can't do a port.

The universal dumper should work - http://chdk.wikia.com/wiki/Canon_Basic/Scripts/Dumper
If you can get the firmware dump, upload it to a file sharing site and post the link here.

Phil.
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)

*

Offline bojofbas

  • *
  • 22
  • SX50 100b
Re: SX30 IS porting thread
« Reply #109 on: 10 / October / 2011, 02:33:31 »
using vers.req, it actually shows as 1.00P which has already been ported. Thanks .

 

Related Topics


SimplePortal © 2008-2014, SimplePortal