supplierdeeply

SX30 IS Release - available on the autobuild server

  • 282 Replies
  • 52581 Views
  • Publish
    Re: SX30 IS beta release
    « Reply #120 on: 14 / January / 2011, 08:39:18 »
    Advertisements
    hi achim-e,
    i have 1.00L with a 16gb card. i tried quite a few methods for partitioning but the simplest (and quickest) way is the one linked in by whim: using sdminst.exe.
    the process is quite self-evident but heres a working link to the pdf describing it:
    http://rapidshare.com/#!download|111l33|400436852|Installing_CHDK_on_SD_Cards__Windows_OS_.pdf|1296
    youll need the second section (sd cards greater than 4gb). depending on your os you might not see the same windows as described (when formatting) but it will work.
    have fun with your sx30 & chdk,
    g

    EDIT: i hope i got the link right now...
    « Last Edit: 14 / January / 2011, 08:42:19 by galocza »

  • Publish
    Re: SX30 IS beta release
    « Reply #121 on: 14 / January / 2011, 14:34:15 »
    Can I reuse the cchdk.cfg created with beta 10 with the newer betas as they come out? Or should I always create a new cchdk.cfg with each new beta?

    Thanks for all the hard work!

  • Publish
    Re: SX30 IS beta release
    « Reply #122 on: 16 / January / 2011, 16:04:16 »
    I have 1.00L beta 10 version. I have noticed that if I set the use-remote to ON, I cannot zoom in/out.  Any body have this issue? any solution?

  • Publish
    Re: SX30 IS beta release
    « Reply #123 on: 16 / January / 2011, 18:46:48 »
    I have 1.00L beta 10 version. I have noticed that if I set the use-remote to ON, I cannot zoom in/out.  Any body have this issue? any solution?

    I have 1.00L beta 10 also. If I set "enable remote" under "remote Parameters" My zoom works fine after leaving "Alt" mode.  Zoom doesn't work in "Alt" mode.   (Note: I don't actually have a remote, I just enabled it in the menus for testing)
    « Last Edit: 16 / January / 2011, 18:48:31 by jzigchdk »


  • Publish
    Re: SX30 IS beta release
    « Reply #124 on: 17 / January / 2011, 08:16:11 »
    I have 1.00L beta 10 version. I have noticed that if I set the use-remote to ON, I cannot zoom in/out.  Any body have this issue? any solution?

    I have 1.00L beta 10 also. If I set "enable remote" under "remote Parameters" My zoom works fine after leaving "Alt" mode.  Zoom doesn't work in "Alt" mode.   (Note: I don't actually have a remote, I just enabled it in the menus for testing)

    It doesn't even if I leave the the Alt mode!  Did I change a setting in CHDK somewhere by mistake that caused it not to work when I allow remote?  Any ideas?

  • Publish
    Re: SX30 IS beta release
    « Reply #125 on: 17 / January / 2011, 09:50:58 »
    Any ideas?
    Try deleting (or backing up if you want to keep it for later) your cchdk.cfg file and let chdk create a new default one, next time it starts up.  Then just change the remote setting and see what happens.  If that doesn't work, download beta 10 again and do a virgin install of all the files and see what happens.

    I should add that I am using beta 10 from http://code.google.com/p/chdk-sx30is/downloads/list, not from the Autobuild site.
    « Last Edit: 17 / January / 2011, 09:54:46 by jzigchdk »

  • Publish
    Re: SX30 IS beta release
    « Reply #126 on: 20 / January / 2011, 07:43:46 »
    Hi all !!

    I'm new here and testing the CHDK 0.9.9-1050 / 100E
    I have a 16GB SCARD and I can't make the card bootable for the autoboot.
    When I click 'set' on 'Make card bootable", nothing happens.
    I have write-protected the SDCARD just after made bootable but i doesn't work.

    Anyone could help me ?
    Thanks
    Chris (from France)

  • Publish
    Re: SX30 IS beta release
    « Reply #127 on: 20 / January / 2011, 08:00:53 »
    Sorry, next time, I'll search more before asking lol
    CHDK can't boot on SDCARD more than 4GB.

    I've read this page : http://chdk.wikia.com/wiki/Bootable_SD_card
    and it is working now !


    One more question :
    I've tried Custom AUTO ISO.
    I guess that the parameters of this function are REAL ISO ?
    But why the shutter speed when pressing half the shutter button is not the real speed ?
    (for example, on screen I can see 1/8 and the real shutting could be 10 seconds !!)
    The EXIF also does not reflect the AUTO ISO, but the canon's values on the screen.

    I have also noticed that Custom AUTO ISO is not working in AUTO MODE With FLASH.
    In P MODE, it works.
    .
    « Last Edit: 20 / January / 2011, 10:08:05 by chris-s »


  • Publish
    Re: SX30 IS beta release
    « Reply #128 on: 20 / January / 2011, 21:08:24 »
    Chris, that's a known issue listed in the first post of this thread.

  • Publish
    Re: SX30 IS beta release
    « Reply #129 on: 21 / January / 2011, 02:25:33 »
    Thanks Sunflower.
    I've seen the issue for everride ISO but not for Custom AUto ISO. Probably the same issue ?

    About the flash in AUTO MODE and Custom Auto ISO, I've seen anything.

    Another thing : could you tell me how to add some items in the User Menu. The manual said "User Menu Ebable : [Edit]" then press +/- key. But where is the +/- key on the SX30 ??

     

    Related Topics