SX30 IS Release - available on the autobuild server - page 5 - CHDK Releases - CHDK Forum
« previous next »
Pages: 1 2 3 4 [5] 6 7 8 9 10 ... 29   Go Down

SX30 IS Release - available on the autobuild server

  • 282 Replies
  • 153037 Views
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: SX30 IS beta release
« Reply #40 on: 22 / December / 2010, 18:51:11 »
Advertisements
Quote from: jorge dias on 22 / December / 2010, 16:53:26
but i have a pink image!

Is it a recognizable image with a pink tint or just pink rubbish?
Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
*

Offline jorge dias

  • *
  • 4
Re: SX30 IS beta release
« Reply #41 on: 22 / December / 2010, 19:21:03 »
when I opened the image with the raw uf she opened with a pink hue, but after I opened the cs5 and the color was normal!
Logged
*

Offline galocza

  • *
  • 35
Re: SX30 IS beta release
« Reply #42 on: 23 / December / 2010, 12:15:42 »
hi again,
if somebody succeeded installing this build to a multi-partition card (4gb<) please confirm and post your method (link if possible). im at my wits end, spent a few evenings tying to put this beta - including beta4 - to my 16gb card, no success...
thanks,
g
Logged
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: SX30 IS beta release
« Reply #43 on: 23 / December / 2010, 16:34:21 »
Quote from: galocza on 23 / December / 2010, 12:15:42
hi again,
if somebody succeeded installing this build to a multi-partition card (4gb<) please confirm and post your method (link if possible). im at my wits end, spent a few evenings tying to put this beta - including beta4 - to my 16gb card, no success...
thanks,
g

First, you have to use Beta 4 - the earlier ones won't work.

This is what I did to test it:
1. Format SD card in camera to get one partition
2. Unpack binaries only build to SD card
3. Manual boot SD card in camera
4. Create card with two partitions (using the option in the Misc --> Debug menu). After running this wait a few seconds then power off the camera.
5. Put SD card back in PC and format it. It should now format as a 2MB SD card.
6. Unpack the binaries only build to the card again
7. Make the card bootable using whatever method you prefer
8. Lock the card, boot CHDK from the card and Swap partitions (under the Misc menu)
9. Put the card back in PC and format it again. You should now be formatting the larger partition (if it's still coming up as 2MB then try the swap partitions again).
10. Unpack the full build to the large SD partition
11. Lock the card, boot manually in the camera and Swap the partitions again.

The card should now autoboot off the 2MB partition; but swap to the large partition after booting for saving images.
If you want to copy the images off the large partition in your PC you will need to swap partitions in the camera before putting the card in your PC, then manual boot and swap back when you put the card back in the camera.

Phil.
Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
*

Offline galocza

  • *
  • 35
Re: SX30 IS beta release
« Reply #44 on: 24 / December / 2010, 01:19:35 »
thanks,
and many thanks for the build too.
this will be the next i will try (now i have to run to work).
in the meantime i tried one more method with sdminst.exe, same results.
i will report back whatever my findings.
g
Logged
*

Offline Sunflower

  • *
  • 25
Re: SX30 IS beta release
« Reply #45 on: 24 / December / 2010, 01:35:56 »
Quote from: philmoz on 23 / December / 2010, 16:34:21
First, you have to use Beta 4 - the earlier ones won't work.

This is what I did to test it:
1. Format SD card in camera to get one partition
2. Unpack binaries only build to SD card
3. Manual boot SD card in camera
4. Create card with two partitions (using the option in the Misc --> Debug menu). After running this wait a few seconds then power off the camera.
5. Put SD card back in PC and format it. It should now format as a 2MB SD card.
6. Unpack the binaries only build to the card again
7. Make the card bootable using whatever method you prefer
8. Lock the card, boot CHDK from the card and Swap partitions (under the Misc menu)
9. Put the card back in PC and format it again. You should now be formatting the larger partition (if it's still coming up as 2MB then try the swap partitions again).
10. Unpack the full build to the large SD partition
11. Lock the card, boot manually in the camera and Swap the partitions again.

The card should now autoboot off the 2MB partition; but swap to the large partition after booting for saving images.
If you want to copy the images off the large partition in your PC you will need to swap partitions in the camera before putting the card in your PC, then manual boot and swap back when you put the card back in the camera.

Phil.


I'm getting hung up on #4 above.  When I answer "yes", nothing happens for a few seconds, then the cam shuts itself off. 

The first time I followed #5, the PC saw a card much larger than 2MB.  The second time, I asked the cam to swap partitions, but it told me the card had only one. 
Logged
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: SX30 IS beta release
« Reply #46 on: 24 / December / 2010, 02:26:50 »
Quote from: Sunflower on 24 / December / 2010, 01:35:56
I'm getting hung up on #4 above.  When I answer "yes", nothing happens for a few seconds, then the cam shuts itself off.  

The first time I followed #5, the PC saw a card much larger than 2MB.  The second time, I asked the cam to swap partitions, but it told me the card had only one.  


Are you using the latest version (Beta 4)?
That was what happened in Beta 3.

If you have downloaded and are using Beta 4 let me know what firmware version you have (in case I messed up one of the versions).

Edit: Looks like I got it wrong for firmware 1.00E and 1.00L (I have 1.00H)  :-[
A new version will be uploaded shortly (Beta 5).

Regards,
Phil.
« Last Edit: 24 / December / 2010, 02:41:46 by philmoz »
Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
*

Offline Varistar

  • *
  • 1
Re: SX30 IS beta release
« Reply #47 on: 24 / December / 2010, 03:54:34 »
A flash with more than 4G can be done easily using SDMInstaller.
Download example: http://stereo.jpn.org/eng/sdm/file/common_files.zip
« Last Edit: 24 / December / 2010, 09:10:13 by Varistar »
Logged
*

Offline galocza

  • *
  • 35
Re: SX30 IS beta release
« Reply #48 on: 24 / December / 2010, 05:12:48 »
hi,

philmoz: same results as Sunflower, with the new beta5.
Varistar: thanks for the advice - ive already tried that, no banana...

g

ps: i always forgot to write i have fw1.00l.
Logged
*

Offline Sunflower

  • *
  • 25
Re: SX30 IS beta release
« Reply #49 on: 24 / December / 2010, 09:33:09 »
Quote from: galocza on 24 / December / 2010, 05:12:48
hi,

philmoz: same results as Sunflower, with the new beta5.
Varistar: thanks for the advice - ive already tried that, no banana...

g

ps: i always forgot to write i have fw1.00l.

Same results here with the newest beta and 1.00e.
Logged
Pages: 1 2 3 4 [5] 6 7 8 9 10 ... 29   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal