G12 Release - available from the autobuild server - page 12 - CHDK Releases - CHDK Forum supplierdeeply

G12 Release - available from the autobuild server

  • 136 Replies
  • 86258 Views
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: G12 beta release (now also available from the autobuild server)
« Reply #110 on: 15 / July / 2011, 06:20:43 »
Advertisements

If max 20=320, then why does it use 500 when I set it to 20?

Auto ISO is disabled in M and TV modes, or if the flash is set to auto.

Phil.
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)

Re: G12 beta release (now also available from the autobuild server)
« Reply #111 on: 16 / July / 2011, 17:19:24 »

If max 20=320, then why does it use 500 when I set it to 20?

Auto ISO is disabled in M and TV modes, or if the flash is set to auto.

Phil.


P mode , Flash ON, and ISO still goes up to 500 when I set custom auto iso to 20.

*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: G12 beta release (now also available from the autobuild server)
« Reply #112 on: 16 / July / 2011, 18:30:41 »

If max 20=320, then why does it use 500 when I set it to 20?

Auto ISO is disabled in M and TV modes, or if the flash is set to auto.

Phil.


P mode , Flash ON, and ISO still goes up to 500 when I set custom auto iso to 20.

Flash On or Flash Auto (is there an 'A' displayed on the flash icon)?

Flash On will work; but as I said Custom ISO is disabled in Flash Auto mode (no idea why, that's the way the code code is written).

Phil.
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)

Re: G12 beta release (now also available from the autobuild server)
« Reply #113 on: 17 / July / 2011, 09:51:23 »

If max 20=320, then why does it use 500 when I set it to 20?

Auto ISO is disabled in M and TV modes, or if the flash is set to auto.

Phil.


P mode , Flash ON, and ISO still goes up to 500 when I set custom auto iso to 20.

Flash On or Flash Auto (is there an 'A' displayed on the flash icon)?

Flash On will work; but as I said Custom ISO is disabled in Flash Auto mode (no idea why, that's the way the code code is written).

Phil.


Yep flash forced ON, not auto. On another note, I thought I read somewhere about there being another version of chdk that has more video options than the standard autobuild. Is there such a version? Where can I find it? Is the video quality of the G12 able to be noticeably improved upon? Thank for all the replies Phil!


*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: G12 beta release (now also available from the autobuild server)
« Reply #114 on: 17 / July / 2011, 09:57:41 »

Yep flash forced ON, not auto. On another note, I thought I read somewhere about there being another version of chdk that has more video options than the standard autobuild. Is there such a version? Where can I find it? Is the video quality of the G12 able to be noticeably improved upon? Thank for all the replies Phil!


Well I'm stumped - it works fine on my camera with firmware 1.00c.
I'll take a look to see if I can see any other reasons and get back to you.

Not sure what you mean by more video options - CHDK allows you to override the video bit rate, and enable optical zoom on the G12 (these are under the Video parameters menu).

Phil.
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)

Re: G12 beta release (now also available from the autobuild server)
« Reply #115 on: 17 / July / 2011, 10:09:59 »

Yep flash forced ON, not auto. On another note, I thought I read somewhere about there being another version of chdk that has more video options than the standard autobuild. Is there such a version? Where can I find it? Is the video quality of the G12 able to be noticeably improved upon? Thank for all the replies Phil!


Well I'm stumped - it works fine on my camera with firmware 1.00c.
I'll take a look to see if I can see any other reasons and get back to you.

Not sure what you mean by more video options - CHDK allows you to override the video bit rate, and enable optical zoom on the G12 (these are under the Video parameters menu).

Phil.


Well, I figured it out. You have to set "Disable Overides" to "Off". I had it set to "Disable". I don't understand why there are 3 options... disable,off,enable. When I had it on disable it would still show the message "auto iso on" while shooting so I don't understand what the disable option does.

Video wise, just wondering if there is anything better.

*

Offline fe50

  • ******
  • 3152
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50

Re: G12 Release - available from the autobuild server
« Reply #117 on: 23 / July / 2011, 00:00:27 »
Hello to everyone, first at all I'm happy to see this type of improvment of the camera features with CHDK software.
I'm here with one problem, I buy my first Canon camera on december 2010, is an PowerShot G12. When I buy the camera
I was happy but after few pictures I discover "HOT PIXELS" on each picture I made. I was very disappointed about the situation and disparate because in that moment I was thinking is something very bad with my camera, I go to the service (Canon original) and the problem was sort out in 20minutes, by "remaping" the senzor. Wich was good.
Now after 7 month I have the same problem with other "HOT PIXELS". I bring the camera to the service and they are very busy and keep me 15 day the camera to the service.
Now the big question: IT IS POSSIBLE TO HAVE THE REMAPPING SOFTWARE AT HOME ON AN CHDK VERSION OR SOMETHING?
Thank you.


*

Offline reyalp

  • ******
  • 14119
Re: G12 Release - available from the autobuild server
« Reply #118 on: 23 / July / 2011, 03:19:56 »
Hello to everyone, first at all I'm happy to see this type of improvment of the camera features with CHDK software.
I'm here with one problem, I buy my first Canon camera on december 2010, is an PowerShot G12. When I buy the camera
I was happy but after few pictures I discover "HOT PIXELS" on each picture I made. I was very disappointed about the situation and disparate because in that moment I was thinking is something very bad with my camera, I go to the service (Canon original) and the problem was sort out in 20minutes, by "remaping" the senzor. Wich was good.
Now after 7 month I have the same problem with other "HOT PIXELS". I bring the camera to the service and they are very busy and keep me 15 day the camera to the service.
Now the big question: IT IS POSSIBLE TO HAVE THE REMAPPING SOFTWARE AT HOME ON AN CHDK VERSION OR SOMETHING?
Thank you.
http://chdk.wikia.com/wiki/Badpixel_removal may be useful.
Don't forget what the H stands for.

*

Online adid1

  • *
  • 13
Re: G12 Release - available from the autobuild server
« Reply #119 on: 05 / August / 2011, 05:59:05 »
Phill I read your answer in DPR forum about
"2011 models support CHDK autoboot from any size SD card, partitioning is no longer required for large cards. "
Will this be implement in G12 CHDK also?
just my G12

 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal