CarLapse - LUA Script for timelapse out of a driving car - page 4 - Completed and Working Scripts

MauricioRPP

38

Re: CarLapse - LUA Script for timelapse out of a driving car

« Reply #30 on: 11 / October / 2009, 23:50:07 »

Advertisements

i am getting error too. got the latest version of script on this thread, fb-lib from the link here too... named the file ".lua" and checked for ANSI encoding.

My cam is a A590, CHDK version autobuild (a590-101b-0.9.8-816-full.zip). am I missing something?

Error is:

Code: [Select]

==loopcounter) then
 break end until 1==2
:1: unexpected symbol nea
r '@'
PRESS SHUTTER TO CLOSE

(the message seems to print CR+LF characters too)

thanks.

Logged

reyalp

14118

Re: CarLapse - LUA Script for timelapse out of a driving car

« Reply #31 on: 11 / October / 2009, 23:52:30 »

looks like you missed the start of the comment that is supposed to enclose the @ params
Your script should have --[[ at the start

Logged

Don't forget what the H stands for.

MauricioRPP

38

Re: CarLapse - LUA Script for timelapse out of a driving car

« Reply #32 on: 12 / October / 2009, 11:24:57 »

it worked! you were right, reyalp. I don't know the lua sintax, so I missed it out.

thanks!

Logged

thedark_master

7

Re: CarLapse - LUA Script for timelapse out of a driving car

« Reply #33 on: 07 / December / 2010, 22:17:10 »

So I just found out about CHDK and decided to try it out. I have a SD600 with firmware 1.00A. When I run this script here is what I get:

Started
SLeeping 2 seconds
sleeping 1 seconds
(it takes a picture and then it turns off with the lens still out and thats it)

Any suggestions on what I should do?

Logged

norbertom

2

Re: CarLapse - LUA Script for timelapse out of a driving car

« Reply #34 on: 08 / February / 2011, 18:25:02 »

Thanks for the script! It works perfectly on my Ixus 100 / SD780 beta and 1053, while on the 1054 beta gives me problems. The only thing is that for every step it takes at least 4 seconds, and I think it is a limitation of the camera, because with continuous shooting can take every 2 seconds or less ... My mistake?

Logged

reyalp

14118

Re: CarLapse - LUA Script for timelapse out of a driving car

« Reply #35 on: 08 / February / 2011, 18:46:53 »

Quote from: norbertom on 08 / February / 2011, 18:25:02

Thanks for the script! It works perfectly on my Ixus 100 / SD780 beta and 1053, while on the 1054 beta gives me problems. The only thing is that for every step it takes at least 4 seconds, and I think it is a limitation of the camera, because with continuous shooting can take every 2 seconds or less ... My mistake?

The only change in 1054 was fixing spelling errors in changlog.txt, so this is definitely not the cause of your problem.

Logged

Don't forget what the H stands for.

norbertom

2

Re: CarLapse - LUA Script for timelapse out of a driving car

« Reply #36 on: 08 / February / 2011, 20:00:06 »

You're right, I reinstalled from scratch and now works with the 1054. Thanks a lot

in the previous post I was wrong to write, actually I wanted to say this:
"The only thing Is that 'it takes at least 4 seconds to shoot, and I think it is not a limitation of my camera, cause with continuous shooting I Can Make shoots Every 2 seconds or less"

Logged

bashir

3

Re: CarLapse - LUA Script for timelapse out of a driving car

« Reply #37 on: 31 / March / 2011, 02:12:45 »

I have also the problem mentioned a couple of times in this thread (last by The_dark_master above).
I installed on both an A610 and an S3, CHDK is from mid march 2011 on both.

On starting carlapsev5 I get sleeping 1...2... then I image taken then camera hangs.

I didn't see any replies to the previous posts mentioning this. Anyone know why this happens?

Bash

Logged