Hi David,
thanks for reply, the steps I already described in my previous posts, here again in summary:
1. I downloaded the sources from
http://stereo.jpn.org/eng/sdm/download.htm2. I downloaded the trunk (zip archive) from
http://tools.assembla.com/chdk/browser/trunk3. I extracted the zip and copied the tools dir into the source folder from step 1
4. I compiled the source (see compile log in one of my previous posts)
5. The resulting DISKBOOT.BIN I copied into the common_files folder where also sdminst.exe is located
6. I started the sdminst.exe
7. I choosed '4GB or less' then it formats the card in quickformat.
8. When It asked me to format with clustersize of 64KB cluster. I choose 'Y'
9. Then I give the card a name.
10. I switch the card to locked and insert into the cam
11. I switch on the cam I can see the big 1.85
12. I press ALT and then MENU to enter the SDM settings
13 The submenu 'Zebra/Histogram' appears, but not the SDM main menu
If I am inside this 'Zebra/Histogram' submenu and move to one of the subentries e.g. 'Histogram mode' then the value on the right side changes automatically form Linear to Log in certain intervals but I do not touch any key.
So it changes from Linear to Log and back to Linear itself. The interval is random.
This happens also to other entries like 'Histogram layout', there also all values appear in random intervals.
I use the IXUS860 cam, and GCC environment inside Eclipse CDT (
www.eclipse.org)
I use a Panasonic 4GB SD HC card class 6.
Thanks for any further help!